

P4gpio
Minimal P4 dev board to bring out almost all GPIO (48 of 55)
- Size
- 87.9 × 23 mm
- Copper layers
- 4
- Thickness
- 1.62 mm
- Parts
- 94
- Nets
- 114
- Pads
- 416
- Tracks, vias
- 1,165, 237
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Apr 2026
- Updated
- 11 May 2026
Overview
P4gpio is an open-source printed circuit board by tannewt, from the tannewt/p4gpio repository on GitHub. It is a 4-layer board of 87.9 × 23 mm with 94 parts on 114 nets, routed with 1,165 tracks and 237 vias.
It is built around the TLV62569DBV, W25Q128JVSIQ and LESD5D5.0CT1G, with the AO3401A, TYPE-C-31-M-31 and TS-1088-AR02016 among its other parts. Its parts include 40 capacitors, 21 resistors, 11 connectors, 8 diodes and 4 ICs.
Main components
9TLV62569DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHLESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorisedAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsTYPE-C-31-M-31
SMD-30℃~+80℃ 1 10000 times 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB ConnectorsTS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile SwitchesESD7951ST5G
DFN1006-20.5pF 100nA 15V 3.5A 5V 60W@8/20us 6V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Single-channel DFN1006-2 ESD and Surge Protection (TVS/ESD) ROHSBORNESD And Surge Protection (TVS/ESD)MBT3906DW1
SOT-363-55℃~+150℃ 150mW 2 PNP 200mA 250MHz 400mV 40V 50nA 5V 60 PNP SOT-363 Bipolar (BJT) ROHSonsemiBipolar (BJT)WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C6, C12, C13, C15, C16, C21, C23, C24, C25, C26, C31, C32, C33, C38, C39, C40 +3 |
| 7 | 10K(1%) | Resistor_SMD:R_0402_1005Metric | R7, R9, R14, R28, R200, R209, R210 |
| 7 | 1uF/16V(10%) | Capacitor_SMD:C_0402_1005Metric | C17, C18, C27, C29, C30, C34, C35 |
| 6 | 10uF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C14, C20, C28, C37 |
| 6 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3, J4, J5, J6, J7, J8 |
| 5 | 5.1K(1%) | Resistor_SMD:R_0402_1005Metric | R5, R6, R11, R12, R13 |
| 4 | LESD5D5.0CT1G | Diode_SMD:D_SOD-523 | D2, D3, D4, D5 |
| 3 | 0 | Resistor_SMD:R_0402_1005Metric | R3, R4, R39 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 2.2uH | Inductor_SMD:L_1008_2520Metric | L1, L2 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C2, C36 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1, C42 |
| 2 | 499k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 51K(1%) | Resistor_SMD:R_0402_1005Metric | R8, R10 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2, Q4 |
| 2 | C2760486 | Adafruit:USB_C_Receptacle_HRO_TYPE-C-31-M-31 | J1, J2 |
| 2 | C720477 | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | BOOT1, RESET1 |
| 2 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J9, J10 |
| 2 | ESD7951ST5G | Diode_SMD:D_SOD-882 | D6, D7 |
| 2 | MBT3906DW1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1, Q3 |
| 2 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U1, U4 |
| 1 | 100K(1%) | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C41 |
| 1 | 22.1K(1%) | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 40MHz(+-10 ppm) C501798 | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J11 |
| 1 | GREEN LED | Diode_SMD:D_0805_2012Metric | D8 |
| 1 | LOGO | chickadee:chickadee_2mm_fcu | G*** |
| 1 | W25Q128JVS | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U3 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | ~ | Espressif:ESP32-P4 | U2 |
Similar boards
- 4 layers50 × 50 mm

- 4 layers81.3 × 61 mm

- 6 layers100 × 60 mm

- 2 layers81.4 × 20 mm

ESP32-C6-USB switch
tomjtoth/ESP32-C6-USB-switch
I found 1x type-A to 3x type-A wireless USB switches on AliExpress.
9 parts - 2 layers180.1 × 180.3 mm

- 2 layers

- 4 layers90 × 90 mm

- 4 layers22.9 × 63 mm

RP2040 Motion Logger
rishikesh2715/RP2040_Motion_Logger
An RP2040 based microcontroller with an ICM-42688 IMU, 1S Battery Charger, SD Card Connector, RGB Led, and USB Type-C connector
70 parts1MIT
Questions
How big is the P4gpio PCB?
It measures 87.9 × 23 mm and has 4 copper layers, 1.62 mm thick.
What parts does the P4gpio use?
94 parts, built around the TLV62569DBV, W25Q128JVSIQ, LESD5D5.0CT1G and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the P4gpio KiCad files?
From the tannewt/p4gpio repository on GitHub, at the commit this page was made from: the board is p4gpio.kicad_pcb and its schematic Ideal Diode.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the P4gpio design in my own project?
Its repository states no licence, so its author keeps all rights: ask tannewt before reusing the design.