

P4hil
ESP32-P4 powered hardware in the loop
- Size
- 81.3 × 61 mm
- Copper layers
- 4
- Thickness
- 1.62 mm
- Parts
- 224
- Nets
- 250
- Pads
- 956
- Tracks, vias
- 2,777, 369
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 Apr 2026
- Updated
- 9 Jun 2026
Overview
P4hil is an open-source printed circuit board by tannewt, from the tannewt/p4hil repository on GitHub. It is a 4-layer board of 81.3 × 61 mm with 224 parts on 250 nets, routed with 2,777 tracks and 369 vias.
It is built around the TLV62569DBV, W25Q128JVSIQ and PI4IOE5V9535ZDEX, with the CH334F, LESD5D5.0CT1G and WS2812B among its other parts. Its parts include 112 resistors, 58 capacitors, 17 connectors, 12 ICs and 4 diodes.
Main components
6TLV62569DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHPI4IOE5V9535ZDEX
QFN-24(4x4)I/O ExpandersDiodes IncorporatedCH334F
QFN-24(4x4)-40℃~+85℃ 0.4mA 3.3V、5V 4 480Mbps 85mA Hub I2C USB 2.0 QFN-24(4x4) USB HUB Controllers ROHSWCH (Nanjing Qinheng Microelectronics)USB HUB ControllersLESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorisedWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
Parts
224| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | 2.2K | Resistor_SMD:R_0402_1005Metric | R74, R75, R100, R101, R102, R103, R104, R105, R106, R107, R108, R109, R110, R111, R112, R113 +23 |
| 39 | R_Protect | Resistor_SMD:R_0402_1005Metric | R14, R15, R35, R36, R37, R38, R39, R40, R41, R42, R43, R44, R45, R46, R47, R48 +23 |
| 21 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C6, C10, C13, C15, C16, C17, C19, C22, C23, C26, C28, C31, C32, C54 +5 |
| 15 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C8, C24, C36, C37, C39, C46, C47, C50, C51, C52, C53, C55, C57 |
| 9 | 4.7K | Resistor_SMD:R_0402_1005Metric | R16, R17, R20, R24, R25, R26, R73, R93, R114 |
| 9 | LED_Small | LED_SMD:LED_0603_1608Metric | ACTIVE1, D5, D6, D8, D9, PORT1, PORT2, PORT3, PORT4 |
| 7 | 100nF | Capacitor_SMD:C_0402_1005Metric | C35, C38, C40, C43, C44, C48, C49 |
| 6 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J6, J7, J10, J11, J12, J15 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R10, R12, R13, R33, R34 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C5, C11, C25, C27, C29 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R21, R22, R23, R27 |
| 3 | 0 | Resistor_SMD:R_0402_1005Metric | R3, R4, R7 |
| 3 | LESD5D5.0CT1G | Diode_SMD:D_SOD-523 | D2, D3, D4 |
| 3 | PI4IOE5V9535ZDEX | Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm | U5, U11, U12 |
| 2 | 1.5k | Resistor_SMD:R_0402_1005Metric | R32, R50 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C12, C14 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C41, C42 |
| 2 | 2.2uH | Inductor_SMD:L_1008_2520Metric | L1, L2 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C30, C56 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C20, C21 |
| 2 | 499k | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 5.1K(1%) | Resistor_SMD:R_0402_1005Metric | R30, R31 |
| 2 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9, J20 |
| 2 | MT9700_SY6280 | Package_TO_SOT_SMD:SOT-23-5 | U8, U9 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 | SW1, SW2 |
| 2 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U3, U10 |
| 1 | 0.1/1% PT2512K 070R1L | Resistor_SMD:R_2512_6332Metric | R19 |
| 1 | 100K(1%) | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y3 |
| 1 | 22.1K(1%) | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C33 |
| 1 | 25Mhz 12pf | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 40MHz(+-10 ppm) C501798 | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 47K | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 6.19K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | CH334F | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U7 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J14 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J4 |
| 1 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J5 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J18 |
| 1 | INA219AxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | IPGRI | Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm | U4 |
| 1 | LOGO | chickadee:chickadee_2mm_fcu | G*** |
| 1 | RJ45_Hanrun_HR911105A_Horizontal | Connector_RJ:RJ45_Hanrun_HR911105A_Horizontal | J19 |
| 1 | USB_A_Stacked | Connector_USB:USB_A_Wuerth_61400826021_Horizontal_Stacked | J13 |
| 1 | USB_C_Receptacle_USB2.0_16P | Adafruit:USB_C_Receptacle_HRO_TYPE-C-31-M-31 | J3 |
| 1 | W25Q128JVS | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U1 |
| 1 | WS2812B | WorldSemi:WS2812B-4020 | D1 |
| 1 | ~ | Espressif:ESP32-P4 | U2 |
The 220 most common of 224 parts.
Similar boards
- 6 layers156.4 × 80 mm

- 4 layers87.9 × 23 mm

- 4 layers70 × 100 mm

- 2 layers61 × 35 mm

Esp32-1pcb
shubhisgonnastealyourcode/FT-32-esp32-s3-dev-board-
Custom ESP32-S3 Development Board with Header Pins for Display and RGB LED
44 parts1 - 4 layers65 × 30 mm

- 4 layers102.4 × 42 mm

MK4001MTD USB Reader
will127534/MK4001MTD-USB-Bridge
The MK4001MTD is a 4 GB Microdrive originally used in the Nokia N91 music phone and some other devices, like MP3 players or USB drives, back when flash storage was still quite expensive.
69 parts46 - 4 layers45 × 40 mm

- 4 layers92 × 56 mm

REIN R1
rein-baremetal/REIN_R1_KiCad
Dual-MCU baremetal embedded development board featuring high-speed QSPI storage, hardware USB hub, and flexible power management. Open for PCB trace routing collaboration
177 parts2
Questions
How big is the P4hil PCB?
It measures 81.3 × 61 mm and has 4 copper layers, 1.62 mm thick.
What parts does the P4hil use?
224 parts, built around the TLV62569DBV, W25Q128JVSIQ, PI4IOE5V9535ZDEX and CH334F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the P4hil KiCad files?
From the tannewt/p4hil repository on GitHub, at the commit this page was made from: the board is p4hil.kicad_pcb and its schematic dut.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the P4hil design in my own project?
Its repository states no licence, so its author keeps all rights: ask tannewt before reusing the design.