

Layer1
- Size
- 90 × 113 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 95
- Pads
- 236
- Tracks, vias
- 466, 24
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Feb 2019
- Updated
- 19 Apr 2019
Overview
Layer1 is an open-source printed circuit board by taninjs, from the taninjs/ESP32-STPM10 repository on GitHub. It is a 2-layer board of 90 × 113 mm with 79 parts on 95 nets, routed with 466 tracks and 24 vias.
It is built around the RAC05-05SK and T60404-E4624-X501. Its parts include 24 resistors, 16 connectors, 11 capacitors, 7 diodes and 4 ICs. It belongs with the ESP32 boards of this library.
Main components
2README
README.mdESP32-STPM10
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16 |
| 6 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H1, H2, H3, H4, H5, H6 |
| 5 | TestPoint | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R16, R17, R18, R19 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C4, C5, C6 |
| 3 | 0R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R6, R14, R24 |
| 3 | 220K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R3, R4 |
| 3 | 6.8K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R20, R21, R22 |
| 3 | LED_Small | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D4 |
| 2 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R10, R13 |
| 2 | 22pF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2 |
| 2 | 4.7 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R11, R12 |
| 2 | 600V 1A | Diode_SMD:D_SMA_Handsoldering | D5, D6 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1, J3 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R8 |
| 1 | 10nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C8 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 1 | 1nF | Capacitor_SMD:C_1806_4516Metric_Pad1.57x1.80mm_HandSolder | C10 |
| 1 | 1uH | Inductor_SMD:L_1812_4532Metric_Pad1.30x3.40mm_HandSolder | L2 |
| 1 | 2.4K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R15 |
| 1 | 220uH | Inductor_SMD:L_1812_4532Metric_Pad1.30x3.40mm_HandSolder | L1 |
| 1 | 22nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C7 |
| 1 | 2M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9 |
| 1 | 390 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5 |
| 1 | 4.194304 MHz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | 43K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R7 |
| 1 | 4700uF | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C11 |
| 1 | 470nF 630V | Layer1:C_Rect_L26.5mm_W15.5mm_P22.50mm_MKS4 | C9 |
| 1 | 5.1V | Layer1:SOD-80 | D7 |
| 1 | 82R 2W | Resistor_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal | R23 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x12 | Connector_JST:JST_PH_B12B-PH-K_1x12_P2.00mm_Vertical | J2 |
| 1 | DOIT_ESP32_Devkit_v1-MCU_Module_Custom | ESP32:ESP32_DOIT_v1 | U4 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | Micro_SD_Shield | SDCard:sdcard | U3 |
| 1 | RAC05-05SK | RAC05-05SK:RAC05-12SK | PS1 |
| 1 | STPM_STPM10BTR | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | T60404-E4624-X501 | CT:T60404-E4624-X501 | T1 |
| 1 | Varistor | Varistor:RV_Disc_D15.5mm_W5.9mm_P7.5mm | RV1 |
| 1 | level_shifter | levelshifter:levelshiter | U2 |
More from taninjs/ESP32-STPM10
2- 2 layers90 × 113 mm

- 2 layers70 × 70 mm

Similar boards
- 2 layers160 × 100 mm

- 4 layers230 × 67 mm

- 2 layers

Hamodule
crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.
46 parts28 - 2 layers83.7 × 70.8 mm

- 2 layers36.8 × 34.7 mm

Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 2 layers128.8 × 99.5 mm

WarriorAttend
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
79 parts915 - 2 layers80 × 107.5 mm

Minino
ElectronicCats/Minino
Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT devices. It was designed as a mini Cat that integrates the powerful ESP32C6, GPS, microSD and OLED.
79 parts183GPL-3.0 - 2 layers151.3 × 120.8 mm

Tairakb
strayer/taira-keyboard
A wireless low-profile split mechanical keyboard with 66 keys inspired by the ErgoDash and Corne Chocolate
79 parts164MIT
Questions
How big is the Layer1 PCB?
It measures 90 × 113 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Layer1 use?
79 parts, built around the RAC05-05SK and T60404-E4624-X501. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Layer1 KiCad files?
From the taninjs/ESP32-STPM10 repository on GitHub, at the commit this page was made from: the board is PCBs/Layer1/Layer1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Layer1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask taninjs before reusing the design.