

Display
- Size
- 90 × 113 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 43
- Pads
- 115
- Tracks, vias
- 308, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Feb 2019
- Updated
- 19 Apr 2019
Overview
Display is an open-source printed circuit board by taninjs, from the taninjs/ESP32-STPM10 repository on GitHub. It is a 2-layer board of 90 × 113 mm with 33 parts on 43 nets, routed with 308 tracks and 17 vias.
Its parts include 12 resistors, 6 capacitors, 6 switches, 2 connectors and 1 IC. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdESP32-STPM10
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 6 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R4, R6, R8, R10, R12 |
| 6 | 4.7k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R3, R5, R7, R9, R11 |
| 6 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H1, H2, H3, H4, H5, H6 |
| 6 | SW_Push | Button_Switch_THT:SW_PUSH-12mm_Wuerth-430476085716 | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Conn_01x12_Male | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1 |
| 1 | arduinopromini | arduinopromini:arduinopromini | U1 |
More from taninjs/ESP32-STPM10
2- 2 layers90 × 113 mm

- 2 layers70 × 70 mm

Similar boards
- 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm

Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm

Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm

Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm

DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm

Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm

CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm

Questions
How big is the Display PCB?
It measures 90 × 113 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Display use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Display KiCad files?
From the taninjs/ESP32-STPM10 repository on GitHub, at the commit this page was made from: the board is PCBs/Layer2/Display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Display design in my own project?
Its repository states no licence, so its author keeps all rights: ask taninjs before reusing the design.