Skip to the content
PCBKitNew board
2 layers44.7 × 37.1 mmTiny, the printed circuit board in 3D

Tiny

tangles-0/cyberdeck-scout6

// #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

Open in PCBKitView on GitHub.kicad_pcb
Size
44.7 × 37.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
20
Pads
53
Tracks, vias
98, 20
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
24 Dec 2025
Updated
28 Jul 2026

Overview

Tiny is an open-source printed circuit board by tangles-0, from the tangles-0/cyberdeck-scout repository on GitHub. It is a 2-layer board of 44.7 × 37.1 mm with 23 parts on 20 nets, routed with 98 tracks and 20 vias.

It is built around the ATTINY404-SSN and TS-1088-AR02016. Its parts include 8 resistors, 5 diodes, 3 capacitors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

JetDeck SCOUT - https://jetdeck.io

Scout Cyberdeck

Repository contents:

  • PCB design files
    • /PCB/cyberdeck current working PCB design file
    • /PCB/cyberdeck-r1|r2 etc snapshot of files sent for production
  • USB PD sink EEPROM flash
    • /Firmware/TPS25751 EEPROM images for the TPS25751 PD front-end
  • Gamepad / mouse firmware
    • /Firmware/gamepad-touch RP2040 mbed sketch for the gamepad. reports HID Mouse, HID Gamepad, HID Touch Interface, and HID Battery to the host
  • Keyboard firmware
    • /Firmware/qmk/ drop this into your qmk_firmware folder and run qmk flash -kb rii/518bt -km default to flash the keyboard
  • Bring-up / test / QA jig (PCB files TBA) and firmware
    • /Firmware/esp32-bringup
  • 3D casing design files
    • /Casing CAD
  • Datasheets
    • /Datasheets for the major components used
  • Display Overlays
    • /Display Overlays overlays for the DSI display used in testing
  • Software
    • /Software will be used if any custom software is written

// #ifndef PIN_PA0 // #define PIN_PA0 11 // #endif // #ifndef PIN_PA1 // #define PIN_PA1 8 // #endif // #ifndef PIN_PA2 // #define PIN_PA2 9 // #endif // #ifndef PIN_PA3 // #define PIN_PA3 10 // #endif // #ifndef PIN_PA4 // #define PIN_PA4 0 // #endif // #ifndef PIN_PA5 // #define PIN_PA5 1 // #endif // #ifndef PIN_PA6 // #define PIN_PA6 2 // #endif // #ifndef PIN_PA7 // #define PIN_PA7 3 // #endif // #ifndef PIN_PB0 // #define PIN_PB0 7 // #endif // #ifndef PIN_PB1 // #define PIN_PB1 6 // #endif // #ifndef PIN_PB2 // #define PIN_PB2 5 // #endif // #ifndef PIN_PB3 // #define PIN_PB3 4 // #endif

Parts

23
QtyValueFootprintReferences
5LED_0402LED_SMD:LED_0402_1005MetricD36, D38, D39, D40, D41
5TestPoint_SmallTestPoint:TestPoint_Pad_2.0x2.0mmTP4, TP14, TP15, TP17, TP19
430RResistor_SMD:R_0402_1005MetricR136, R137, R138, R139
2100nFCapacitor_SMD:C_0402_1005MetricC139, C140
210KResistor_SMD:R_0402_1005MetricR66, R95
12.2uFCapacitor_SMD:C_0603_1608MetricC84
14.7KResistor_SMD:R_0402_1005MetricR99
1430RResistor_SMD:R_0402_1005MetricR98
1ATtiny404-SSPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU17
1TS-1088-AR02016LibraryGlobalFootprints:BTN_SMD_4x3mmK_80

Questions

How big is the Tiny PCB?

It measures 44.7 × 37.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tiny use?

23 parts, built around the ATTINY404-SSN and TS-1088-AR02016. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tiny KiCad files?

From the tangles-0/cyberdeck-scout repository on GitHub, at the commit this page was made from: the board is PCB/tiny/tiny/tiny.kicad_pcb and its schematic PCB/cyberdeck-compact/cyberdeck-compact.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tiny design in my own project?

Its repository states no licence, so its author keeps all rights: ask tangles-0 before reusing the design.

More from tangles-0/cyberdeck-scout

10
  • 4 layers209.6 × 164.2 mmCyberdeck, the printed circuit board in 3D

    Cyberdeck

    tangles-0/cyberdeck-scout

    // #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

    697 parts6
  • 4 layers79.5 × 43.4 mmTest pwr2, the printed circuit board in 3D

    Test pwr2

    tangles-0/cyberdeck-scout

    // #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

    158 parts6
  • 4 layers27.4 × 72.3 mmPower module, the printed circuit board in 3D

    Power module

    tangles-0/cyberdeck-scout

    // #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

    129 parts6
  • 2 layers78.7 × 51.6 mmUsb-3-hub, the printed circuit board in 3D

    Usb-3-hub

    tangles-0/cyberdeck-scout

    // #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

    110 parts6
  • 4 layers35 × 35 mmPd charger, the printed circuit board in 3D

    Pd charger

    tangles-0/cyberdeck-scout

    // #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

    88 parts6
  • 2 layers143.3 × 87.3 mmUsb cart, the printed circuit board in 3D

    Usb cart

    tangles-0/cyberdeck-scout

    // #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

    68 parts6
  • 4 layers56.5 × 48.1 mmDisplay driver, the printed circuit board in 3D

    Display driver

    tangles-0/cyberdeck-scout

    // #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

    62 parts6
  • 2 layers34.7 × 31.4 mmSound, the printed circuit board in 3D

    Sound

    tangles-0/cyberdeck-scout

    // #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

    58 parts6
  • 2 layers28.2 × 21.1 mmTest pwr-3, the printed circuit board in 3D

    Test pwr-3

    tangles-0/cyberdeck-scout

    // #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

    38 parts6
  • 2 layers89.8 × 70.8 mmRak4630-antenna, the printed circuit board in 3D

    Rak4630-antenna

    tangles-0/cyberdeck-scout

    // #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

    5 parts6

Similar boards

  • 2 layers61.7 × 36.8 mmGenesis 6button, the printed circuit board in 3D

    Genesis 6button

    rfmerrill/genesis_6button

    Simple PCB + ATTiny404 code for a 6-button mega drive controller.

    27 parts5MIT
  • 2 layers57.1 × 24.4 mmPcb cia, the printed circuit board in 3D

    Pcb cia

    codepainters/amiga_yafs

    Yet Another (Amiga) FDD Swapper

    14 parts3
  • 2 layers70 × 65.5 mmOrnament2023, the printed circuit board in 3D

    Ornament2023

    Chris-Johnston/ornament2023

    ATTiny404 xmas tree ornament for 2023

    28 parts
  • 2 layers67.8 × 83.8 mmSanta caws, the printed circuit board in 3D

    Santa caws

    Chris-Johnston/santacaws

    More novelty circuitboards, powered by an ATTINY404.

    19 parts
  • 2 layers90 × 40 mmPSUPack, the printed circuit board in 3D

    PSUPack

    cnf/PSUPack

    PSU BackPack / breakout

    25 partsCC-BY-SA-4.0
  • 2 layers62 × 83 mmVehicle Power Switch, the printed circuit board in 3D

    Vehicle Power Switch

    custom-ds/Vehicle-Auto-On

    With the Arduion programmer board loaded with the jtag2updi software, and the Pin 6 from the Arduino connected to the Reset line on the ATTiny404, you can Build and Program directly inside of the Visual Studio Code.

    49 partsGPL-3.0
  • 2 layers50.8 × 44 mmRf room sensor, the printed circuit board in 3D

    Rf room sensor

    dselcan/rf-room-sensor-hw

    PCB design files and BOM for the RF Room Sensor device

    32 partsBSD-3-Clause