DG-7D/PCFanControllerPCFanController is an open-source printed circuit board by DG-7D, from the DG-7D/PCFanController repository on GitHub. It is a 2-layer board of 65.5 × 30 mm with 37 parts on 56 nets, routed with 198 tracks and 81 vias.
It is built around the ATTINY404-SSN, AP63203WU and 74HC595, with the CH221K, BSS138 and MTN2306AN3-VB among its other parts. Its parts include 12 resistors, 9 capacitors, 6 ICs, 3 connectors and 3 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| ボタン | 操作 |
|---|---|
| DISP | 表示切替 (回転数表示→指令値表示→消灯→(ループ)) |
| + | 指令値増加、停止時に押すと始動 |
| - | 指令値減少、0%のとき押すと停止 |
4ピンのPCファンの場合、PCやこの制御器が指令するのは最大回転数に対する割合であり、PWMのデューティー比の形で送信され、回転数の制御はファン側で行われる。30%以上ではおおむね線形に変化するようにファン側で制御される。30%未満での挙動はファンにより異なり、最低の回転数を維持するものが多く、0%では停止したりしなかったりする。
0%で停止しないファンであっても、この制御器の停止状態では通電自体を切るので停止する。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 180 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 3 | C | Capacitor_SMD:C_0603_1608Metric | C2, C6, C9 |
| 3 | SW_Push | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | SW1, SW2, SW3 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 74HC595 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U2, U3 |
| 2 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1, J2 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 3.9u | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U5 |
| 1 | ATtiny404-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CH221K | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | Fan_4pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1 |
| 1 | MTN2306AN3 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | OSL40562-LR | Display_7Segment:CA56-12EWA | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
It measures 65.5 × 30 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the ATTINY404-SSN, AP63203WU, 74HC595 and CH221K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DG-7D/PCFanController repository on GitHub, at the commit this page was made from: the board is PCB/PCFanController.kicad_pcb and its schematic PCB/PCFanController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DG-7D before reusing the design.
ghostinkoma/mPBCH32M030DS0
WCH CH32M030C8U7 (QFN48) の DIP-42 MCU モジュール (ブレッドボード対応) と、差し替え式の パワー段子基板 (MOSFET ×8) の 2 枚構成です。 次のモータを駆動します。 USB-C から ESP32-C3 / Arduino のように書き込めて、USB-PD 充電器 (9〜15V) だけでもモーターを回せます。 内蔵の電流源・USB-PD・OPA/CMP を使い切る設計です…
taguko/passive-lipo-balancer-nano
Passive LiPo cell balancer based on Arduino Nano.
ModestoHagney/zigbee-led-strip
Zigbee colour light firmware for a WS2812 strip on ESP32-H2 / ESP32-C6
