

BalanceRobot
Self-balancing robot using LQR control, written in Rust
- Size
- 70 × 119 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 27
- Pads
- 96
- Tracks, vias
- 126, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 Dec 2022
- Updated
- 9 Jan 2023
Overview
BalanceRobot is an open-source printed circuit board by tana, from the tana/balance-robot2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 70 × 119 mm with 26 parts on 27 nets, routed with 126 tracks and 2 vias.
It is built around the LT1172IN8 and TB67S158NG. Its parts include 5 capacitors, 4 ICs, 3 resistors, 3 connectors and 2 diodes. It belongs with the robots and motor control boards and the ESP32 boards of this library.
Main components
2LT1172IN8
--40℃~+100℃ 100kHz 3V~60V Adjustable soft-start、Cycle-by-cycle current limiting、Adjustable current limiting、Frequency synchronization Step-down type、Boost - DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersTB67S158NG
SDIP-24-20℃~+85℃ 1.5A 500mΩ Parallel、Serial Unipolar Drive Yes SDIP-24 Stepper Motor Driver ROHSToshibaStepper Motor Driver
README
README.mdSelf-balancing robot using LQR control, written in Rust

Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 0.1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C5 |
| 2 | 1S3 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D1, D2 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 1 | 1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 1 | 330u | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C4 |
| 1 | 33u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 47u | Inductor_THT:L_Radial_D10.5mm_P5.00mm_Abacron_AISR-01 | L1 |
| 1 | 7.5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | LT1172 | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | Li-ion 16340 | myfootprint:Takachi_CR123A-PC | BT1 |
| 1 | M5Atom | myfootprint:M5Atom | U3 |
| 1 | Stepper 1 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Stepper 2 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | TA48M05F | Package_TO_SOT_THT:TO-251-3_Vertical | U1 |
| 1 | TB67S158NG | myfootprint:SDIP24_300mil | U4 |
The 23 most common of 26 parts.
Similar boards
- 2 layers58.4 × 58.4 mm

- 2 layers57.3 × 19 mm

- 2 layers98 × 59.5 mm

MCP23017 PCB
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
26 parts915 - 2 layers142.9 × 98.5 mm

- 2 layers86.1 × 86.1 mm

- 2 layers103.8 × 50 mm

Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers20.3 × 34.8 mm

L0 ESP32
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
26 parts546MIT - 2 layers40.6 × 50.8 mm

WALTsm
google/walt
A device for measuring latency of physical sensors and outputs on phones and computers
26 parts474Apache-2.0
Questions
How big is the BalanceRobot PCB?
It measures 70 × 119 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BalanceRobot use?
26 parts, built around the LT1172IN8 and TB67S158NG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BalanceRobot KiCad files?
From the tana/balance-robot2 repository on GitHub, at the commit this page was made from: the board is kicad/BalanceRobot.kicad_pcb and its schematic kicad/BalanceRobot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BalanceRobot design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).