2 layers91.4 × 71.1 mm
Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT
2 layers150 × 84 mm
Rf trans
tamnayw/KiCAD- Size
- 150 × 84 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 45
- Pads
- 72
- Tracks, vias
- 113, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 May 2026
- Updated
- 22 May 2026
Overview
Rf trans is an open-source printed circuit board by tamnayw, from the tamnayw/KiCAD repository on GitHub. It is a 2-layer board of 150 × 84 mm with 8 parts on 45 nets, routed with 113 tracks and 0 vias.
It is built around the NRF24L01. Its parts include 5 ICs, 2 connectors and 1 switch. It belongs with the radio and wireless boards of this library.
Main components
1Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 3vR | Custom:3.3v ams1117 regulator mod | U2 |
| 1 | 5vR | Custom:5v ams1117 regulator mod | U1 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J4 |
| 1 | Nrf24l01 | Custom:NRF24l01pa mod | J3 |
| 1 | SW_DPST_x2 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 1 | esp | Custom:ESP32 devkit | U3 |
| 1 | jstk 1 | Custom:Joystick mod | U5 |
| 1 | jstk 2 | Custom:Joystick mod | U4 |
Questions
How big is the Rf trans PCB?
It measures 150 × 84 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rf trans use?
8 parts, built around the NRF24L01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rf trans KiCad files?
From the tamnayw/KiCAD repository on GitHub, at the commit this page was made from: the board is rf trans/rf trans.kicad_pcb and its schematic rf trans/rf trans.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rf trans design in my own project?
Its repository states no licence, so its author keeps all rights: ask tamnayw before reusing the design.
Similar boards
- 2 layers92.5 × 82.8 mm
Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16 - 2 layers38.6 × 90.3 mm
BioElectricalSensor
CGrassin/biosignals
Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).
107 parts15MIT - 2 layers139 × 139 mm
Breeze electronics design
microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.
107 parts13GPL-3.0 - 2 layers50 × 50 mm
- 2 layers100 × 80 mm
- 2 layers100 × 40 mm
- 2 layers66.4 × 52.5 mm
