Skip to the content
2 layers116 × 55.5 mmPandp, the printed circuit board in 3D

Paste and Pick and Place and Reflow design

Size
116 × 55.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
94
Nets
95
Pads
377
Tracks, vias
1,250, 48
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
7 Oct 2016
Updated
16 Oct 2016

Overview

Pandp is an open-source printed circuit board by takigama, from the takigama/PaPaPaR repository on GitHub. It is a 2-layer board of 116 × 55.5 mm with 94 parts on 95 nets, routed with 1,250 tracks and 48 vias.

It is built around the STM32F103RCT6, DRV8830DRC and IRF540N. Its parts include 33 connectors, 24 resistors, 17 capacitors, 4 ICs and 2 diodes. It belongs with the STM32 boards of this library.

Main components

3

README

README.md

PaPaPaR

Short for Paste and Pick and Place and Reflow.

This project is an attempt to create a board that will do solder paste, pick and place and lastly reflow. Initially I'll be aiming souly at the pick and place stuff but theres enough componentry on the board to control the paste and reflow components as well.

It does have enough componentry to also do a single extruder 3d printer which wasnt exactly a goal, but was a handy alternative function for the board.

The board itself is reasonably compact but not a huge amount of work has gone into it yet.

Usage

Well, none yet. Haven't even printed the board yet. Currently using RAMPS as a test bed.

This project is based on the STM32F103 chip and will (at least initially) use the STM32duino code base with the arduino software stack for making the thing "go"

You'll need kicad if you want to see the board and once i have a working model, i'll share it as a project on oshpark!

Thanks

Thanks go to the folk who do arduino, the folk who do stm32duino, to the folk who do KiCad and many others probably. As of the current version the only hardware designer is me... Im also the only coder... and the only everything else but would welcome others

Where it starts

The first version will be quite simple. Designed to be controlled with 2 "wiichucks", there is an expectation of having a camera and the pick and place will be done "manually" but all electrically - i.e. you'll place componets using joystick with some interesting hot keys and a bit of camera work.

It Looks Like This:

Top

What you need

  • 3 Steppers (one for the pump)
  • Perastaltic pump that can be driving by stepper (or 5-6v DC)
  • a pick-up sucktion cup (i have a design for this thats really simple)
  • a usb microscope.
  • a design for it all to sit on
  • a fair amount of imagination and pixie dust!
  • a 12v power source

The pump (which is used to hold components) can either be stepper driven or you can find plenty of 5-6v aquarium pumps on ebay that should surfice but they want to be less than 1A.

Currently im working on the design of the actual platform for the whole unit and it will look like a distant cousin of something like the mendel 90 (my fave 3d print) but with a stationary platform and a cartesian type head. I was VERY tempted to do a delta but am shelving that idea for now

Currently there also exists no code but watch this space - some will definitely be borrowed from the sprinter/marlin code bases but no code yet exists.

Things To Note

  1. Its designed to be possible to hand solder (which is how I will build it)

  2. I take no responsibility if it does anything negative!

  3. Its alpha

  4. Im not the worlds greatest hardware designer (or even a good one)!

  5. Currently doesnt have a license - feel free to do as you will, but will ultimately be licensed under a compatible open source license (GPL for code as an example)

Parts

94
QtyValueFootprintReferences
20RResistors_SMD:R_0805_HandSolderingR2, R3, R4, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 +4
14CONN_01X03Pin_Headers:Pin_Header_Straight_1x03P2, P4, P6, P7, P16, P17, P18, P19, P20, P21, P26, P27, P28, P29
8CPSMD_Packages:SMD-1210_PolC1, C2, C3, C10, C16, C17, C18, C19
7CONN_01X04Pin_Headers:Pin_Header_Straight_1x04P10, P14, P15, P30, P31, P32, P33
6CONN_01X02Pin_Headers:Pin_Header_Straight_1x02P1, P3, P5, P9, P11, P13
4CCapacitors_SMD:C_0805_HandSolderingC5, C9, C14, C15
4CONN_02X03Pin_Headers:Pin_Header_Straight_2x03P22, P23, P24, P25
4MountingHole_2-5mmMounting_Holes:MountingHole_2-5mmREF80, REF81, REF82, REF83
4POLOLU-DRV8825POLOLU-DRV8825:POLOLU-DRV8825DRV1, DRV2, DRV3, DRV4
210pCapacitors_SMD:C_0805_HandSolderingC4, C6
220pCapacitors_SMD:C_0805_HandSolderingC12, C13
2DDiodes_SMD:SMB_HandsolderingD1, D2
2IRF540NTO_SOT_Packages_THT:TO-220_Neutral123_Vertical_LargePadsQ1, Q2
2RResistors_SMD:R_0402R23, R24
10.1ufCapacitors_SMD:C_0805_HandSolderingC8
1100kResistors_SMD:R_0805_HandSolderingR1
14.7kResistors_SMD:R_0805_HandSolderingR22
1ADP2303-5Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmIC1
1AP1117D33TO_SOT_Packages_SMD:SOT-223U1
1CONN_02X04Pin_Headers:Pin_Header_Straight_2x04P12
1Crystal_Small - 2063972 on element (8mhz)Crystals:Crystal_HC49-SD_SMDY2
1Crystal_Small - 2101357 on element 32khzCrystals:ABM3Y1
1DRV8830Housings_SSOP:TSSOP-10_3x3mm_Pitch0.5mmIC2
1INDUCTOR_SMALLChoke_SMD:Choke_SMD_7.3x7.3_H3.5L1
1STM32F103RCHousings_QFP:LQFP-64_10x10mm_Pitch0.5mmU2
1SW_PUSHButtons_Switches_SMD:SW_SPST_FSMSMSW1
1USB_OTGMyLibs:USB_Micro-B-OshParkP8

Similar boards

  • 4 layers46.1 × 45.6 mmAvionics mainboard, the printed circuit board in 3D

    Avionics mainboard

    AFS-pt/PROMETHEUS-1

    Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1

    202 parts15
  • 2 layers58.4 × 78.7 mmSimple rsp01-3, the printed circuit board in 3D

    Simple rsp01-3

    RymanSatProject/hobby_sat_book

    21 parts6
  • 2 layers25.4 × 39.1 mmTiny robo v2, the printed circuit board in 3D

    Tiny robo v2

    ab3nd/TinyRobo

    Hardware and software for a tiny robot platform based on the ESP-8266 WiFi modules and hacked children's toys.

    34 parts2
  • 4 layers98 × 98 mmAvionics Solar Panel Z-, the printed circuit board in 3D

    Avionics Solar Panel Z-

    cmu-argus/Avionics-Solar-Panel-Z-

    Solar panel board for Z- face.

    144 parts1
  • 2 layers29.8 × 28.1 mmQMBTv1, the printed circuit board in 3D

    QMBTv1

    glina126/KiCad_PCBs

    collection of my kicad PCBs

    72 parts
  • 4 layers44.4 × 35.8 mmAvionics motherboard, the printed circuit board in 3D

    Avionics motherboard

    spacecraft-design-lab-2019/avionics-motherboard

    Main flight computer board for the PyCubed-1 spacecraft

    76 parts
  • 2 layers81 × 52 mmIr4stm32, the printed circuit board in 3D

    Ir4stm32

    but0n/IrDA-stm32

    其中应用最广泛的是NEC协议。NEC标准规定: 红外通信的载波频率为38KHz, 占空比为1: 3;数据格式包括了引导码、用户码、数据码和数据码反码, 编码总占 32 位。数据反码是 数据码反相后的编码, 编码时可用于对数据的纠错。注意: 第二段的用户码也可以在遥控应用电路中被设置成第一段用户码的反码, 如下图所示:

    76 parts54

Questions

How big is the Pandp PCB?

It measures 116 × 55.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pandp use?

94 parts, built around the STM32F103RCT6, DRV8830DRC and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pandp KiCad files?

From the takigama/PaPaPaR repository on GitHub, at the commit this page was made from: the board is hardware/pandp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pandp design in my own project?

Its repository states no licence, so its author keeps all rights: ask takigama before reusing the design.