

QMBTv1
collection of my kicad PCBs
- Size
- 29.8 × 28.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 84
- Pads
- 285
- Tracks, vias
- 637, 75
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 Feb 2015
- Updated
- 22 Feb 2015
Overview
QMBTv1 is an open-source printed circuit board by glina126, from the glina126/KiCad_PCBs repository on GitHub. It is a 2-layer board of 29.8 × 28.1 mm with 72 parts on 84 nets, routed with 637 tracks and 75 vias.
It is built around the ATMEGA328P-MMH, DRV8830DRC and BSS138. Its parts include 21 connectors, 18 capacitors, 16 resistors, 10 ICs and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328P-MMH
VQFN-28-EP(5x5)-40℃~+85℃ 1.8V~5.5V 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH VQFN-28-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)DRV8830DRC
VSON-10-EP(3x3)-40℃~+85℃ 1 1A 1A 2.75V~6.8V 300nA 450mΩ I2C Yes VSON-10-EP(3x3) Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor DriversBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdKiCad_PCBs
All my public PCBs. Some finalized, some still work in progress.
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | SMD_Packages:SMD-0402_c | C1, C2, C3, C4, C10, C11, C16 |
| 6 | 1K | Resistors_SMD:R_0402 | R1, R12, R13, R14, R15, R17 |
| 4 | 0.22ohm | Resistors_SMD:R_0402 | R7, R8, R9, R10 |
| 4 | DRV8830 | footprints:DRV8830 | U3, U4, U5, U6 |
| 2 | 10nF | SMD_Packages:SMD-0402_c | C9, C15 |
| 2 | 2.2uF | SMD_Packages:SMD-0402_c | C6, C8 |
| 2 | 270ohm | Resistors_SMD:R_0402 | R5, R6 |
| 2 | 27ohm | Resistors_SMD:R_0402 | R3, R4 |
| 2 | 47pf | SMD_Packages:SMD-0402_c | C13, C14 |
| 2 | BSS138 | SMD_Packages:SOT-23 | Q1, Q2 |
| 2 | C | SMD_Packages:SMD-0402_c | C17, C18 |
| 2 | LED | footprints:SMD-0402_LED | D1, D5 |
| 1 | 10K | Resistors_SMD:R_0402 | R2 |
| 1 | 10Kohm | Resistors_SMD:R_0402 | R11 |
| 1 | 1uF | SMD_Packages:SMD-0402_c | C5 |
| 1 | 2.2nF | SMD_Packages:SMD-0402_c | C12 |
| 1 | 3V3 | footprints:1x0.5mm_Through_hole2 | P18 |
| 1 | 4.7uF | SMD_Packages:SMD-0402_c | C7 |
| 1 | 5V | footprints:1x0.5mm_Through_hole2 | P20 |
| 1 | A0 | footprints:1x0.5mm_Through_hole2 | P5 |
| 1 | A1 | footprints:1x0.5mm_Through_hole2 | P6 |
| 1 | A2 | footprints:1x0.5mm_Through_hole2 | P7 |
| 1 | A3 | footprints:1x0.5mm_Through_hole2 | P8 |
| 1 | ATMEGA328P-MM | footprints:QFN-28-4x4mm_fixed_mask | IC1 |
| 1 | Booster_5V | footprints:FAN4860 | IC3 |
| 1 | DTR | footprints:1x0.5mm_Through_hole2 | P13 |
| 1 | FTDI | footprints:FT230X-(QFN16-4x4mm) | U2 |
| 1 | GND | footprints:1x0.5mm_Through_hole2 | P19 |
| 1 | INDUCTOR | footprints:Inductor_0603 | 1uH1 |
| 1 | MCP1802_(Vreg) | footprints:Sot-23-5 | IC2 |
| 1 | MISO | footprints:1x0.5mm_Through_hole2 | P9 |
| 1 | MOSI | footprints:1x0.5mm_Through_hole2 | P10 |
| 1 | MPU6050 | footprints:MPU6050 | IC4 |
| 1 | RST | footprints:1x0.5mm_Through_hole2 | P12 |
| 1 | RX | footprints:SMD-0402_LED | D2 |
| 1 | SCK | footprints:1x0.5mm_Through_hole2 | P11 |
| 1 | SCL | footprints:1x0.5mm_Through_hole2 | P15 |
| 1 | SDA | footprints:1x0.5mm_Through_hole2 | P14 |
| 1 | SS | footprints:1x0.5mm_Through_hole2 | P16 |
| 1 | TX | footprints:SMD-0402_LED | D3 |
| 1 | USB-MICRO-B | footprints:microB_USB_SMD | CON1 |
| 1 | VCC | Socket_Strips:Socket_Strip_Straight_1x02 | P17 |
| 1 | ceramic_resonator | footprints:ceramic_resonator_smd | U1 |
| 1 | m1 | footprints:2x0.5mm_Through_Hole | P1 |
| 1 | m2 | footprints:2x0.5mm_Through_Hole | P4 |
| 1 | m3 | footprints:2x0.5mm_Through_Hole | P3 |
| 1 | m4 | footprints:2x0.5mm_Through_Hole | P2 |
More from glina126/KiCad_PCBs
3- 2 layers22 × 22 mm

- 2 layers

- 2 layers7.1 × 15 mm

Similar boards
- 4 layers100.4 × 83 mm

Component tester
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
79 parts1 - 4 layers46.1 × 45.6 mm

Avionics mainboard
AFS-pt/PROMETHEUS-1
Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1
202 parts15 - 2 layers58.4 × 78.7 mm

- 2 layers25.4 × 39.1 mm

Tiny robo v2
ab3nd/TinyRobo
Hardware and software for a tiny robot platform based on the ESP-8266 WiFi modules and hacked children's toys.
34 parts2 - 4 layers98 × 98 mm

- 4 layers82 × 100 mm

- 4 layers44.4 × 35.8 mm

Avionics motherboard
spacecraft-design-lab-2019/avionics-motherboard
Main flight computer board for the PyCubed-1 spacecraft
76 parts - 2 layers116 × 55.5 mm

Questions
How big is the QMBTv1 PCB?
It measures 29.8 × 28.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the QMBTv1 use?
72 parts, built around the ATMEGA328P-MMH, DRV8830DRC and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the QMBTv1 KiCad files?
From the glina126/KiCad_PCBs repository on GitHub, at the commit this page was made from: the board is QMBT_reborn/QMBTv1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the QMBTv1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask glina126 before reusing the design.