

Klec 02
- Size
- 221.3 × 73 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 82
- Pads
- 558
- Tracks, vias
- 1,076, 26
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Nov 2024
- Updated
- 11 Apr 2025
Overview
Klec 02 is an open-source printed circuit board by takashicompany, from the takashicompany/klec_02 repository on GitHub. It is a 2-layer board of 221.3 × 73 mm with 88 parts on 82 nets, routed with 1,076 tracks and 26 vias.
Its parts include 36 diodes, 36 switches, 2 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdKLEC-02 "Gravity-36"
https://x.com/Hottyhottea/status/1843859533871058982
部品リスト
| 画像 | 部品名 | 個数 | 備考 |
|---|---|---|---|
| KLEC-02 PCB | 1 | ||
| Pro Micro | 2 | どれを買っていいか分からない場合はコンスルー付きのセットの購入を推奨します。 | |
![]() | タクトスイッチ | 2 | |
| コンスルー | 4 | PCBとPro Microを接続する端子です。Pro Microに付属するピンヘッダでの取り付けも可能ですが、作業ミスや故障した際の取り替えが容易になりますので、コンスルーの使用を強く推奨します。ピンヘッダでの取り付けは当キーボードと当ビルドガイドではサポートしません。 コンスルーの必要な高さはPro Microによって異なりますので、販売元にご確認ください。コンスルーについての詳細な説明はこちらをご一読ください。併せて取り付け方の説明も目を通しておくと作業がスムーズに進められます。 | |
| スイッチソケット MX用 | 36 | 使用せずとも、PCBとキースイッチをハンダ付けすることで取り付けは可能ですが、メンテナンス性と組み立て手順を間違えた際のリカバリーを考慮すると、スイッチソケットを使用することを推奨します。 | |
![]() | MX互換キースイッチ | 36 | |
| MX互換キーキャップ | 36 | こちらから各キーのサイズを確認できます。 | |
![]() | ウレタンクッション | 12 | 数はお好みで増減させてください。 |
| アクリルケース | 1 | こちらのデータを遊舎工房のレーザー加工サービスにてカット依頼するなどして製造してください。後日にキーボードアクリルプレートに追加予定です。 | |
| M2スペーサー | 12 | 長さはお好みで調整してください。Pro Microなどにもよりますが、7mm~10mmぐらいがオススメです。 | |
| M2ネジ 5mm | 24 |
ファームウェア
QMK Firmwareへのプルリクエストはこちらです。
VIAに対応したファームウェアはこちらです。ソースコードはこちらになります。
RemapからWebブラウザを用いたファームウェアの書き込みとキーマップの変更が可能です。
2024年11月5日現在、Remapの審査中ですのでRemapでキーマップを変更したい場合はこちらのjsonファイルをアップロードしてご利用ください。
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | DIODE | kbd:D3_TH_SMD_v2 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D101, D102 +20 |
| 34 | SW_Push | takashicompany:CherryMX_TH-Hotswap | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +18 |
| 8 | Val** | kbd:HOLE | Hole1, Hole2, Hole3, Hole4, Hole5, Hole6, Hole7, Hole8 |
| 2 | Breakaway_Tabs | kbd:Breakaway_Tabs | BT1, BT2 |
| 2 | MJ-4PP-9 | kbd:MJ-4PP-9_1side | J1, J2 |
| 2 | ProMicro | takashicompany:ProMicro_v3.5_print-inside_back | U1, U2 |
| 2 | SW_Push | takashicompany:CherryMX_TH-Hotswap_1.25u | SW101, SW102 |
| 2 | SW_Push | kbd:ResetSW_1side | RESET_SW1, RESET_SW2 |
Similar boards
- 2 layers142.5 × 106.3 mm

- 2 layers43.8 × 60.3 mm

Smallreplacement
c0pperdragon/C64-Video-Enhancement
Component video modification for the C64 8-bit computer
88 parts286MIT - 2 layers95.3 × 95.3 mm

- 2 layers69.9 × 108 mm

- 2 layers127 × 36.2 mm

- 2 layers44.6 × 53.7 mm

- 2 layers43 × 43 mm

TurboCAN
henrikssn/TurboCAN
This is the official repository for the TurboCAN controller board, designed specifically for the Voron AfterBurner toolhead but can also be used on similar toolheads using NEMA17 steppers.
88 parts82 - 2 layers251.3 × 103.7 mm

Questions
How big is the Klec 02 PCB?
It measures 221.3 × 73 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Klec 02 use?
88 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Klec 02 KiCad files?
From the takashicompany/klec_02 repository on GitHub, at the commit this page was made from: the board is kicad/klec_02.kicad_pcb and its schematic kicad/klec_02.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Klec 02 design in my own project?
Its repository states no licence, so its author keeps all rights: ask takashicompany before reusing the design.


