

SLAC A Telemetry
- Size
- 30 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 63
- Pads
- 315
- Tracks, vias
- 409, 145
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Oct 2019
- Updated
- 2 Feb 2020
Overview
SLAC A Telemetry is an open-source printed circuit board by takamasavvv, from the takamasavvv/SLAC-A-Telemetry repository on GitHub, published under the MIT licence. It is a 4-layer board of 30 × 70 mm with 74 parts on 63 nets, routed with 409 tracks and 145 vias.
It is built around the NCV7342MW3. Its parts include 33 resistors, 21 capacitors, 7 ICs, 2 connectors and 1 diode.
Main components
1README
README.mdSLAC-A-Telemetry
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 47kΩ | Resistor_SMD:R_0402_1005Metric | R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33 |
| 10 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C7, C8, C9, C11, C18, C20 |
| 6 | 22Ω | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R8, R11, R12 |
| 6 | 4.7kΩ | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R17, R18 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C13, C14 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C10, C12, C15, C16 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 56Ω | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 820Ω | Resistor_SMD:R_0402_1005Metric | R14, R15 |
| 2 | 9pF | Capacitor_SMD:C_0201_0603Metric | C19, C21 |
| 1 | 1.5kΩ | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 1MΩ | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 4.7nF | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | CY8C58xxLTI-LPxxx | KUTKiCad_footprint:Cypress_QFN-68_EP_8x8_Pitch0.4mm | U5 |
| 1 | Crystal_MHz | KUTKiCad_footprint:Crystal_Murata_XRCHA | Y1 |
| 1 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | KRC_Conn_CAN | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | U1 |
| 1 | KRC_Conn_SWD | KUTKiCad_footprint:JST_JQ_05JQ-BT_1x05_P2.5mm_Vertical | P1 |
| 1 | LED_RGBA | KUTKiCad_footprint:LED_LiteOn_LTST-C19HE1WT | D1 |
| 1 | LOGO | VVV-KiCad-Logo:kamon | G*** |
| 1 | LT1761-5 | Package_TO_SOT_SMD:TSOT-23-5 | U3 |
| 1 | LT1965xDD-3.3 | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mm | U4 |
| 1 | NCV7342 | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U6 |
| 1 | Polyfuse | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | RM-92X | KUTKiCad_footprint:RFLink_Module_RM-92A | U7 |
| 1 | Thermistor_NTC | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | USB_B_Micro | KUTKiCad_footprint:Hirose_ZX_ZX62D-B-5P8 | J1 |
| 1 | W25N01GVxxIG-IT | KUTKiCad_footprint:WSON-8_8x6mm_P1.27mm | U2 |
The 73 most common of 74 parts.
Similar boards
- 4 layers30 × 70 mm

- 4 layers30.9 × 66 mm

Tiny4FSK
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
74 parts915 - 4 layers46.8 × 34.8 mm

SmartWatch V4
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
74 parts258MIT - 4 layers17 × 16.5 mm

Splitter breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
74 parts205 - 4 layers64 × 27 mm

- 4 layers26 × 12.7 mm

Quadcopter ESC v2
ckflight/ESC-BLDC-HARDWARE
BLDC 3 phase motor speed controller hardware design working with open source BLHeli_S firmware.
74 parts108 - 4 layers100 × 60 mm

- 4 layers99.1 × 101.6 mm

Driving module
schuhumi/autocut
autoCut is a heavy duty 4x4 automatic lawn mower robot
74 parts38GPL-3.0
Questions
How big is the SLAC A Telemetry PCB?
It measures 30 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SLAC A Telemetry use?
74 parts, built around the NCV7342MW3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SLAC A Telemetry KiCad files?
From the takamasavvv/SLAC-A-Telemetry repository on GitHub, at the commit this page was made from: the board is SLAC-A-Telemetry.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SLAC A Telemetry design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).