Skip to the content
4 layers99.1 × 101.6 mmDriving module, the printed circuit board in 3D

Driving module

schuhumi/autocut38

autoCut is a heavy duty 4x4 automatic lawn mower robot

Size
99.1 × 101.6 mm
Copper layers
4
Thickness
1.6 mm
Parts
74
Nets
140
Pads
295
Tracks, vias
108, 5
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
29 Jun 2014
Updated
10 Apr 2020

Overview

Driving module is an open-source printed circuit board by schuhumi, from the schuhumi/autocut repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 99.1 × 101.6 mm with 74 parts on 140 nets, routed with 108 tracks and 5 vias.

It is built around the L298HN. Its parts include 38 resistors, 12 connectors, 11 capacitors, 5 diodes and 3 ICs. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

1

README

README.md

autoCut

autoCut is an automatic lawn mower robot. It features:

  • Four weel drive with kink steering
  • Motorized mowing height leveling
  • Two 85 watt mowing motors, each equipped with two very sharp blades, able to snap back on hard obstacles
  • On the fly interchangeable LiPo-battery with voltage monitoring
  • Wifi network connection for web interface which includes gamepad remote control
  • Raspberry Pi as its main computer and head of the microcontroller i2c-network

progress

What it can do already:

  • [drive system] works pretty much brilliant
  • [power supply] Measures individual cell voltages and rings an audible alarm in case of undervoltage or improper connected battery. Handles battery changes without losing power for the control system
  • [main module] Raspberry works quite well with ArchLinux ARM and provides a webinterface on the network. Will be replaced by Cubieboard 2 since RasPi has hardware I2C issues
  • [mowing module] Runs the mowing motors with a reasonably decent rpm regulation algorithm. Electrical mowing height adjustment through web interface is implemented.

What it can't do yet:

  • [power supply] Measure the current as well as the total battery voltage
  • [general] No environmental sensoring for automatic movement yet, so manual control is needed

Things to improve:

  • [power supply] design a proper pcb (its on a prototyping board so far)
  • [mowing module] Change FETs for ones with lower heat dissipation and enhance the rpm regulation algorithm

Preserved for the future:

  • Build an automatic battery changing and charging station

Parts

74
QtyValueFootprintReferences
1710kResistor_SMD:R_0805_2012MetricR2, R3, R5, R6, R10, R11, R14, R15, R16, R17, R21, R24, R25, R26, R27, R28 +1
121kResistor_SMD:R_0805_2012MetricR9, R19, R20, R22, R29, R30, R31, R32, R33, R34, R35, R36
9100nCapacitor_SMD:C_0805_2012MetricC3, C4, C5, C6, C7, C8, C9, C10, C11
4100RResistor_SMD:R_0805_2012MetricR1, R8, R37, R38
43k3Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR12, R13, R18, R23
4D_Bridge_+-AADiode_SMD:Diode_Bridge_Diotec_SO-DIL-SlimD2, D3, D4, D5
3MountingHole_3.2mm_M3MountingHole:MountingHole_3.2mm_M3M3, M3, M3
2L298HNproto:TO-220-15_P2.54x2.54mm_StaggerOdd_Lead4.58mm_Vertical_bent_protoU2, U3
11000uCapacitor_THT:CP_Radial_D12.5mm_P5.00mmC2
1330RResistor_SMD:R_0805_2012MetricR4
1470uCapacitor_THT:CP_Radial_D8.0mm_P5.00mmC1
1CN10@NUCLEO-F401REConnector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_VerticalJ9
1CN7@STM32NUCLEO-F401REConnector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_VerticalJ5
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1Conn_Angle_PotConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ12
1Conn_Data_BusConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ1
1Conn_PowerXESS:xess-MOLEX-8981-04PJ6
1Conn_Revolution_Sensors_M1_M2Connector_IDC:IDC-Header_2x03_P2.54mm_VerticalJ2
1Conn_Revolution_Sensors_M3_M4Connector_IDC:IDC-Header_2x03_P2.54mm_VerticalJ3
1LEDLED_THT:LED_D3.0mm_ClearD1
1MCP23017_SPPackage_DIP:DIP-28_W7.62mmU1
1Motor1TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ7
1Motor2TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ8
1Motor3TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ10
1Motor4TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ11
1Q_Photo_NPNLED_THT:LED_D3.0mm_ClearQ1

The 73 most common of 74 parts.

More from schuhumi/autocut

3
  • 2 layers100.3 × 100.2 mmMaehwerktreiber, the printed circuit board in 3D

    Maehwerktreiber

    schuhumi/autocut

    autoCut is a heavy duty 4x4 automatic lawn mower robot

    93 parts38GPL-3.0
  • 2 layers100 × 100 mmMainModule, the printed circuit board in 3D

    MainModule

    schuhumi/autocut

    autoCut is a heavy duty 4x4 automatic lawn mower robot

    19 parts38GPL-3.0
  • 2 layers105 × 10 mmBattery internals, the printed circuit board in 3D

    Battery internals

    schuhumi/autocut

    autoCut is a heavy duty 4x4 automatic lawn mower robot

    9 parts38GPL-3.0

Similar boards

  • 2 layers160 × 100 mmVentilator shield, the printed circuit board in 3D

    Ventilator shield

    breeze-ventilator/covid19-ventilator

    Breeze ventilator for COVID-19

    81 parts25MIT
  • 2 layers90.9 × 73.2 mmBluepill expansion, the printed circuit board in 3D

    Bluepill expansion

    GinoAvanzini/bluepill-expansion

    Simple blue pill expansion board. Used as learning tool in a KiCad workshop

    43 parts2GPL-3.0
  • 2 layers123.2 × 50.2 mmI2c l298p, the printed circuit board in 3D

    I2c l298p

    abzman/modular-i2c-board-set

    boards designed to be used together to create a modular control system

    133 parts1Unlicense
  • 2 layers113.4 × 103.3 mmMNAPcb, the printed circuit board in 3D

    MNAPcb

    adityasinghmech007/Motor_Control_PCB

    Repo for PCB Design

    138 parts1
  • 2 layers163 × 121.5 mmRobotica, the printed circuit board in 3D

    Robotica

    MatiasCH4iman/workshop-projects

    Repository containing my personal programming projects, including scripts, web applications, and electronics projects. Each folder contains a different project with its corresponding documentation.

    37 parts1
  • 2 layers67 × 86 mmMutteruhr, the printed circuit board in 3D

    Mutteruhr

    Race666/masterclock

    Firmware und Schaltungen zum Steuern von sog. Nebenuhren (z.B. Bahnhofsuhren)

    50 parts1
  • 2 layers144.3 × 78.7 mmShield Galileo, the printed circuit board in 3D

    Shield Galileo

    rodolfoviolac/qser

    QSER is a application and hardware shield interface to manage and fully control a engine motor (Quanser Robots) on Galileo v2 shield.

    20 parts1MIT
  • 2 layers395.2 × 253.5 mmEsp32 wroom, the printed circuit board in 3D

    Esp32 wroom

    aelde/kalwtummad2

    โปรเจคนี้เกิดจากความสนใจใน esp32 ของผมและพอดีช่วงนั้นอาจารย์มีหุ่นยนต์ดูดฝุ่นราคาถูกที่ไม่ได้ใช้อยู่ตัวนึง และพอดีกับที่ผมมี mpu6050 อยู่ที่บ้านพอดี ผมเลยเกิดไอเดียที่จะสร้างหุ่นยนต์ที่บังคับด้วยการขยับของมือขึ้นมา…

    47 parts

Questions

How big is the Driving module PCB?

It measures 99.1 × 101.6 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Driving module use?

74 parts, built around the L298HN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Driving module KiCad files?

From the schuhumi/autocut repository on GitHub, at the commit this page was made from: the board is Electronics/Driving Module/driving_module/driving_module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Driving module design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).