2 layers155.5 × 130 mm
Einkpicframe
Spritetm/picframe_colepd
A WiFi picture frame allowing for remote photo uploads, using an ESP32-C3 and a 5.6" color E-ink display
60 parts97
2 layers79.2 × 30.5 mm
RTR CANSystem board
Tail-BackShape/RTR-CANSystem- Size
- 79.2 × 30.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 22
- Pads
- 106
- Tracks, vias
- 267, 74
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Feb 2024
- Updated
- 9 Apr 2024
Overview
RTR CANSystem board is an open-source printed circuit board by Tail-BackShape, from the Tail-BackShape/RTR-CANSystem repository on GitHub. It is a 2-layer board of 79.2 × 30.5 mm with 19 parts on 22 nets, routed with 267 tracks and 74 vias.
It is built around the ESP32-C3-WROOM-02-H4 and MC7805CT-BP. Its parts include 6 capacitors, 5 connectors, 3 resistors, 3 ICs and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
MC7805CT-BP
TO-2200℃~+150℃ 1 1.5A 2V@(1A) 35V 42uV 5V 5mA 73dB@(120Hz) Fixed Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicro Commercial ComponentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1μ | 01.RTR-CANSystem-board_library:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 2 | 10k | 01.RTR-CANSystem-board_library:R_0805_2012Metric | R2, R3 |
| 1 | 120 | 01.RTR-CANSystem-board_library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | BOOT | 01.RTR-CANSystem-board_library:SW_Push_1P1T_NO_CK_KSC7xxJ | SW2 |
| 1 | Conn_01x07_Socket | 01.RTR-CANSystem-board_library:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | Conn_01x08_Socket | 01.RTR-CANSystem-board_library:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | ESP32-C3-WROOM-02 | 01.RTR-CANSystem-board_library:ESP32-C3-WROOM-02 | U3 |
| 1 | MicroB | 01.RTR-CANSystem-board_library:HRS_ZX62-B-5PA_33_ | J1 |
| 1 | NJM72223 | 01.RTR-CANSystem-board_library:TO-252-2 | U2 |
| 1 | RESET | 01.RTR-CANSystem-board_library:SW_Push_1P1T_NO_CK_KSC7xxJ | SW1 |
| 1 | USB_A | 01.RTR-CANSystem-board_library:usb-PCB | J3 |
| 1 | USB_A | 01.RTR-CANSystem-board_library:USB_A_CNCTech_1001-011-01101_Horizontal | J2 |
| 1 | ~ | 01.RTR-CANSystem-board_library:DIP-8_W7.62mm | U1 |
Questions
How big is the RTR CANSystem board PCB?
It measures 79.2 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RTR CANSystem board use?
19 parts, built around the ESP32-C3-WROOM-02-H4 and MC7805CT-BP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RTR CANSystem board KiCad files?
From the Tail-BackShape/RTR-CANSystem repository on GitHub, at the commit this page was made from: the board is RTR-CANSystem-board/RTR-CANSystem-board.kicad_pcb and its schematic CANmainSys/CANmainSys.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RTR CANSystem board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tail-BackShape before reusing the design.
Similar boards
- 2 layers18 × 14.4 mm
- 2 layers60 × 30 mm
- 2 layers88.6 × 30 mm
- 2 layers79.9 × 36.2 mm
Desk display
nepyope/Project-Homunculus
Project Homunculus is open-source, low-cost hardware for capturing human hand and arm motions. It has two parts.
63 parts51 - 2 layers76.8 × 23.5 mm
SommerESP
exico91/SommerESP
A plug and play ESP32-C3 board to control Sommer garage doors
41 parts29MIT - 2 layers51 × 71 mm
- 4 layers100 × 75 mm
OpenAirScope
emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
282 parts26MIT