Skip to the content
2 layers301.4 × 102.3 mmPanelized, the printed circuit board in 3D

my custom split keyboard 🫶

Size
301.4 × 102.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
171
Nets
98
Pads
573
Tracks, vias
517, 14
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 Mar 2025
Updated
29 Nov 2025

Overview

Panelized is an open-source printed circuit board by taciturnaxolotl, from the taciturnaxolotl/thyme repository on GitHub, published under the MIT licence. It is a 2-layer board of 301.4 × 102.3 mm with 171 parts on 98 nets, routed with 517 tracks and 14 vias.

Its parts include 44 switches, 42 diodes, 2 ICs and 2 connectors. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

README

README.md

The thyme keyboard

blueprint

[!NOTE] If you want to build this yourself then go grab the files from the latest release!

BOM

PartQuantityPriceLinkDescriptionNotes
PCB1$15.70JLCPCB2-layer, 1.6mm, black, leaded HaslI wanted to get ENIG but that bumped the price by $20
Total $15.70 + $13.04 shipping
Choc v1 switches50$25.00Chosfoxpink variant: 20+-5 gf linear$0.50 per switch
Choc PG135050$7.25Chosfoxhot swap sockets$0.145 per socket
1u keycaps40$14.00ChosfoxWhite PBT low profile$0.35 per keycap
1u homing keycaps2$0.80ChosfoxWhite PBT low profile$0.40 per keycap
1.5u keycaps2$1.65ChosfoxWhite PBT low profile$0.83 per keycap
Total cost: $48.70 + $8 shippingaverage of $0.37 per keycap
SuperMini NRF52840 (Nice!Nano footprint)2$8.08AliExpressWireless Microcontroller$4.04 per MCU
301230 3.7V 110mAh LiPo Battery2$7.50AliExpressthe non jst ones are cheaper but the crimper is 60 bucks and there is no way im buying that$3.75 per battery
Diodes42$0.99Aliexpress1N4148$0.01 per diode
Machine Pins1$0.99AliExpress26x2 needed to socket the two MCUscomes in a 100 pack of 4 per header
Total cost: $14.10 + $6.52 shipping
Power Switch4$0.39DigiKeyadded an extra switch for each side as backup$0.10 per switch
JST PH 2.0mm 2-pin Connector4$0.40DigiKey$0.10 per connector
Total cost: $1.96 + $8.15 tarrif/sales tax/shippingi cant find good matches for these on ali and shipping is ridiculous rn as well
Machine Sockets 2.54mm1$7.35Amazon26x2 needed to socket the two MCUscomes in a 10 pack of 40x1 rows

Total cost: $123.52

Shipping / Tax / Tariffs / Per store shopping list

StoreShippingSubtotalTotalItems
AliExpress$6.52$14.20$20.622x SuperMini NRF52840, Machine Pins, 2x LiPo Battery, 42x diodes
DigiKey$8.15 (tarrifs and tax too)$1.96$10.114x Power Switch, 4x JST Connector
Chosfox$8$48.70$56.7050x Choc v1 switches, 40x 1u keycaps, 2x 1u homing keycaps, 2x 1.5u keycaps
JLCPCB$13.04$15.70$28.741x PCB
Amazon$07.35$7.35machine sockets

Schematics

schematic

pcb

Build Notes

Panelization is the most annoying bit of this whole process. I was able to finally get it work work by using kikit to generate rails and tabs.

bash
kikit panelize \
    --layout 'grid; rows: 1; cols: 1; space: 3mm;' \
    --tabs 'fixed; width: 3mm; vcount: 8;' \
    --cuts 'mousebites; drill: 0.5mm; spacing: 1mm; offset: 0.2mm; prolong: 0.5mm;' \
    --framing 'railstb; width: 5mm; space: 3mm; chamfer: 1mm;' \
    --tooling '3hole; hoffset: 2.5mm; voffset: 2.5mm; size: 1.5mm;' \
    --fiducials '3fid; hoffset: 5mm; voffset: 2.5mm; coppersize: 2mm; opening: 1mm;' \
    --post 'millradius: 1mm;' \
    --text 'simple; text: "THYME v1.14"; anchor: mt; voffset: 2mm;' \
    --text2 'simple; text: Created on {date} JLC Order: JLCJLCJLC; anchor: mb; voffset: -2.5mm; hjustify: center; vjustify: center;' \
    thyme.kicad_pcb panelization/panelized.kicad_pcb

panelized

Firmware is zmk and is maintained in the submodule /zmk. The latest firmware build can be grabbed from nightly.link/taciturnaxolotl/thyme-module/workflows/build as a zip containing the left and right half uf2 files.

The case was made in onshape and is available in this document. The case is made of PLA and printed on an A1 mini. It is likely to change quite a bit once I get my pcb assembled and can fit test stuff. Evenentually I would like to add a top plate that attaches to the bottom with magnets and mill the whole case out of aluminum.

A major tool that helped with the research and organization of my thoughts was my figjam board! I used it to keep track of all the resources I found and what parts I wanted to use. Once I got to actually picking specific parts I moved that to the bom table above.

figjam board

© 2025-present Kieran Klukas

Parts

171
QtyValueFootprintReferences
71NPTHNPTHKiKit_MB_10_1, KiKit_MB_10_1, KiKit_MB_10_1, KiKit_MB_10_2, KiKit_MB_10_3, KiKit_MB_10_4, KiKit_MB_10_5, KiKit_MB_10_6, KiKit_MB_10_7, KiKit_MB_11_1, KiKit_MB_11_2, KiKit_MB_11_3, KiKit_MB_11_4, KiKit_MB_11_5, KiKit_MB_12_1, KiKit_MB_12_2 +55
42D_SmallDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +26
42SW_PushPCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.00uSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +26
6FiducialFiducialKiKit_FID_B_1, KiKit_FID_B_2, KiKit_FID_B_3, KiKit_FID_T_1, KiKit_FID_T_2, KiKit_FID_T_3
4, , ,
2JST BATTERY Rlibraries:CONN_S2B-PH-K-S_JSTJ1, J2
2Power Switchlibraries:SW_SLW-1277744-3A-N-DS1, S2
2nice_nanolibraries:SuperMini NRF52840U1, U2

More from taciturnaxolotl/thyme

1
  • 2 layers301.4 × 86.3 mmThyme, the printed circuit board in 3D

    Thyme

    taciturnaxolotl/thyme

    my custom split keyboard 🫶

    90 parts9MIT

Similar boards

  • 2 layers155 × 80 mmESP32Controller, the printed circuit board in 3D

    ESP32Controller

    simon-jouet/ESP32Controller

    ESP32-based 3D printer controller

    171 parts134
  • 2 layers285 × 117 mmTartan, the printed circuit board in 3D

    Tartan

    hsgw/tartan

    60% keyboard made by through-hole parts only

    171 parts98
  • 2 layers285.8 × 123.8 mmGingham, the printed circuit board in 3D

    Gingham

    yiancar/gingham_pcb

    A 60% throughole keyboard inspired by the Plaid

    171 parts86
  • 2 layers248.9 × 120.7 mm16nx, the printed circuit board in 3D

    16nx

    16n-faderbank/16nx

    16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.

    171 parts76
  • 2 layers110 × 60 mmBms-8s50-ic, the printed circuit board in 3D

    Bms-8s50-ic

    LibreSolar/bms-8s50-ic

    Fully integrated 12V-24V BMS using ISL94202

    171 parts47CC-BY-SA-4.0
  • 2 layers115 × 46 mmKampela C1, the printed circuit board in 3D

    Kampela C1

    Alzymologist/Kampela

    Hardware signer and key storage for Substrate ecosystem

    171 parts21GPL-3.0
  • 2 layers346.2 × 95.5 mmMkey, the printed circuit board in 3D

    Mkey

    MabezDev/mkey

    A mechanical keyboard based on an ESP32-S3

    171 parts16Apache-2.0
  • 2 layers238.8 × 137.2 mmOOKeyboard, the printed circuit board in 3D

    OOKeyboard

    mayermakes/00Keyboard

    an open source ortholinear BLE keyboard. from scratch, including Firmware, video on element14presents

    171 parts12GPL-3.0

Questions

How big is the Panelized PCB?

It measures 301.4 × 102.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Panelized use?

171 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Panelized KiCad files?

From the taciturnaxolotl/thyme repository on GitHub, at the commit this page was made from: the board is kicad/panelization/panelized.kicad_pcb and its schematic kicad/thyme.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Panelized design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).