Skip to the content
2 layers26 × 26.7 mmEmbedCute, the printed circuit board in 3D

The firmware supports multiple scenes including: - clock - bus status - dino mini game - stock price display This project is built with PlatformIO and runs on the Arduino framework.

Size
26 × 26.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
31
Pads
60
Tracks, vias
61, 7
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
30 Jul 2026
Updated
2 Sep 2026

Overview

EmbedCute is an open-source printed circuit board by t0mmy-678470, from the t0mmy-678470/EmbedCute repository on GitHub. It is a 2-layer board of 26 × 26.7 mm with 11 parts on 31 nets, routed with 61 tracks and 7 vias.

It is built around the MPU-6500. Its parts include 4 ICs, 3 capacitors, 1 resistor and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

EmbedCube Firmware

Overview

EmbedCube is a small smart wearable / desk display built around the ESP32-C3 Super Mini. It combines an OLED display, rotary encoder, motion sensor, and Wi-Fi connectivity to provide a simple smart-home style dashboard.

The firmware supports multiple scenes including:

  • clock
  • bus status
  • dino mini game
  • stock price display This project is built with PlatformIO and runs on the Arduino framework.

Features

  • Real-time clock display
  • Bus arrival information display
  • Stock price fetch and display
  • Scene switching using rotary encoder
  • Deep sleep / wake support with motion detection
  • OLED-based visual interface
  • Lightweight multi-task firmware design

Hardware

This project is designed for the following hardware:

  • ESP32-C3 Super Mini
  • 128x64 OLED display
  • EC11 rotary encoder
  • MPU6500
  • Wi-Fi connection for online data fetching
  • LEDs and input pins for control and notification

Pin Mapping

Please match the project’s hardware wiring to the board definitions used in the firmware(pininfo.h). The exact pin assignments are defined in the project source and should be checked before hardware assembly.

Required Tools

  • VS Code
  • PlatformIO
  • USB cable for ESP32 programming
  • Internet connection for stock and bus data fetching

Getting Started

  1. Clone the repository
  2. Print the 3D models using your 3D printer
  3. Order the PCB from JLCPCB or your preferred PCB manufacturer using the fabrication files.
  4. Prepare the components
    • ESP32-C3 super mini
    • 0.96-inch 4-pin OLED display with SSD1306 driver
    • Rotary Encoder: EC11
  5. Solder the components onto the pcb and fit the assembled board into the 3D-printed case
  6. Open the project in VS Code with PlatformIO
  7. Install dependencies automatically via PlatformIO
  8. Update Wi-Fi credentials in the firmware
  9. Build and flash the firmware to ESP32-C3

Project Behavior

After power on:

  • the device initializes the display and sensors
  • Wi-Fi connects automatically
  • the system starts the default scene
  • the rotary encoder can be used to switch scenes
  • the display updates based on the active scene Scenes include:
  • time
  • bus status
  • dino game
  • stock price view

The firmware contains multiple tasks:

  • scene scheduler
  • display scene task
  • rotary encoder reader
  • shake detection and sleep handling The active scene is selected through the encoder interaction and notification mechanism.

Notes

This is a prototype / learning project Performance depends on available memory and task stack usage Network-dependent features may fail when Wi-Fi is unavailable Some features are intended for testing and iteration during development

Limitations

  • Stock and bus data require internet access
  • Some features are still experimental
  • Memory and stack usage should be reviewed carefully when adding new scenes or tasks
  • The project is optimized for experimentation, not production deployment

Future Works

  • richer UI and animations
  • improved error handling and watchdog monitoring

License

This project is intended for personal and educational use. Please check the repository license file for details before distribution or commercial use.

Parts

11
QtyValueFootprintReferences
2100nCapacitor_SMD:C_0603_1608MetricC2, C3
110nCapacitor_SMD:C_0603_1608MetricC1
11kResistor_SMD:R_0603_1608MetricR1
1ESP32-C3 SUPER MINIembedcube:esp32-c3 super miniU1
1LEDLED_SMD:LED_0603_1608MetricD1
1LOGOLOGOG***
1MPU-6500Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mmU2
1OLED SSD1315embedcube:SSD1315U3
1~embedcube:RotaryEncoderU4

The 10 most common of 11 parts.

Similar boards

  • 2 layers57.6 × 40 mmMushak pcb, the printed circuit board in 3D

    Mushak pcb

    gautam-dev-maker/mushak

    It is a Micromouse, maze solving bot.

    117 parts62MIT
  • 4 layers55 × 97 mmMelodio SelfMate V2, the printed circuit board in 3D

    Melodio SelfMate V2

    zeeblaze/Melodio-SelfMate

    Your Ultimate Portable Music Companion For Home Automation.

    121 parts53
  • 2 layers96 × 74.4 mmMonolith, the printed circuit board in 3D

    Monolith

    luftaquila/monolith

    DIY wireless real-time datalogging platform for Student Formula and Baja.

    138 parts45
  • 2 layers76 × 99.9 mmMain pcb, the printed circuit board in 3D

    Main pcb

    kyletyni/mercury

    ESP32 based Micromouse source code and PCB files

    122 parts10
  • 2 layers60 × 50 mmSaposenBoard, the printed circuit board in 3D

    SaposenBoard

    hide4096/SaposenBoard

    85 parts2
  • 2 layers32.8 × 53.6 mmHermes, the printed circuit board in 3D

    Hermes

    MeghanaM4/Hermes

    make a PCB with an on-board sensor to transmit data via I2C, get the money to build it

    10 parts2MIT
  • 2 layers100 × 100 mmCopperPilotDrone, the printed circuit board in 3D

    CopperPilotDrone

    CopperPilot/CopperPilotDronePCB

    Flight controller and airframe on one ESP32-S3 board. Fly it from any phone over its own Wi-Fi. Motor traces sized to IPC-2221 for about 3 A.

    109 parts1
  • 4 layers133.1 × 115.3 mmMad Bot, the printed circuit board in 3D

    Mad Bot

    Incomprehensible/Mad_Bot

    Exploratory project in Embedded and Multi-Agent Robotics

    95 parts1MIT

Questions

How big is the EmbedCute PCB?

It measures 26 × 26.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the EmbedCute use?

11 parts, built around the MPU-6500. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EmbedCute KiCad files?

From the t0mmy-678470/EmbedCute repository on GitHub, at the commit this page was made from: the board is pcb/main/main.kicad_pcb and its schematic pcb/main/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EmbedCute design in my own project?

Its repository states no licence, so its author keeps all rights: ask t0mmy-678470 before reusing the design.