2 layers100 × 62 mm
Fallblatt Controller
CatoLynx/KroneSplitFlapReplacement
Hardware and software for a custom split-flap controller for KRONE type D modules
39 parts
2 layers99 × 62 mm
Hot mainboard
szymonPJO/Hot-Air-ControllerSimple Hot Air station
- Size
- 99 × 62 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 44
- Pads
- 152
- Tracks, vias
- 392, 12
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Oct 2023
- Updated
- 18 Mar 2024
Overview
Hot mainboard is an open-source printed circuit board by szymonPJO, from the szymonPJO/Hot-Air-Controller repository on GitHub. It is a 2-layer board of 99 × 62 mm with 66 parts on 44 nets, routed with 392 tracks and 12 vias.
It is built around the LMV358, MOC3081M and SFH617A-2X001. Its parts include 14 connectors, 11 resistors, 6 transistors, 5 diodes and 3 ICs. It belongs with the computers and single-board computers boards of this library.
Main components
3
LMV358
SOP-8-40℃~+125℃ 10pA 10pA 1MHz 2 2.5V~5.5V 20mA 20nV/√Hz@10kHz 2uV/℃ 40uA 5mV 600V/ms 65dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHSTECH PUBLICOperational Amplifier
MOC3081M
DIP-6-40℃~+85℃ 1 1.5V 1500V/us 150mA 30mA 7.5kV 800V TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
SFH617A-2X001
DIP-4-55℃~+110℃ 1.35V 125% 250mV@10mA,10mA 2us 2us 5.3kV 50mA 60mA 63% 6V 70V Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output Optoisolators
README
README.mdHot-Air-Controller
Simple Hot Air station with some 8-bit AVR (ATmega or ATtiny), 2x16 alfanumeric OLED and potentiometer for regulation Power: 230VAC heating, 12V fan, 5V
I just want to make this hot station from useless parts I have
Build
This project is built on the linux (fedora). BTW: On windows, avr-gcc libraries paths (maybe only for CMakeLists) needs to be modified.
Software Requirments
- make
- cmake
- avr-gcc
- avrdude
Hardware Requirments
- USBASP
- ATMega88a
- LCD (HD44780 driver)
- Power output (230VAC) with zero cross-detection circuit
- Power output (12V) PWM fan circuit
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | , , , , , , , , , , , , , , , | ||
| 5 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5 |
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 4 | NPN | Package_TO_SOT_SMD:TSOT-23 | Q2, Q2, Q2, Q3 |
| 4 | ~ | Connector_Pin:Pin_D1.3mm_L11.0mm | J2, J3, J4, J5 |
| 3 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J9, J10, J11 |
| 3 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J8, J14 |
| 2 | 200R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R9 |
| 2 | 470k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R6 |
| 2 | R_Potentiometer | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RV1, RV2 |
| 2 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6, J7 |
| 1 | 100k? | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 100nF | Resistor_SMD:R_0805_2012Metric | C2 |
| 1 | 10k(?) | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 10uF 50V | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 300R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 4A | Fuse:Fuseholder_Clip-5x20mm_Keystone_3512P_Inline_P23.62x7.27mm_D1.02x2.41x1.02x1.57mm_Horizontal | F1 |
| 1 | 56k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | BT136-500 | Package_TO_SOT_THT:TO-220-3_Vertical | Q4 |
| 1 | HW-183 | !Converter:HW-183 | MOD2 |
| 1 | LMV358 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | MOC3081M | Package_DIP:DIP-6_W7.62mm_LongPads | U2 |
| 1 | SFH617A-2X001 | Package_DIP:DIP-4_W7.62mm_LongPads | U1 |
| 1 | XL-007 | !PowerSupply:XL-007 | MOD1 |
| 1 | YJL2301A(?) | Package_TO_SOT_SMD:TSOT-23 | Q1 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J12 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J13 |
Similar boards
- 2 layers44.2 × 32.6 mm
Wiring
esp-ebus/ebus-adapter-hardware
This repo conains KiCAD design of eBUS bus powered (without external supply) adapter to WiFi.
49 parts44 - 4 layers48.5 × 33.5 mm
- 4 layers100 × 20 mm
- 4 layers89 × 60.5 mm
- 2 layers64.8 × 62 mm
- 2 layers41.5 × 35.5 mm
OpenEstim++
humancomputerintegration/BOH-Electro-Tactile
This is the repository for PCB schematics and Arduino codes used for the "Full-Hand Electro Tactile Feedback without Obstructing Palmar Side of Hand" paper (ACM CHI2023).
28 parts13 - 2 layers68.6 × 53.3 mm
Questions
How big is the Hot mainboard PCB?
It measures 99 × 62 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hot mainboard use?
66 parts, built around the LMV358, MOC3081M and SFH617A-2X001. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hot mainboard KiCad files?
From the szymonPJO/Hot-Air-Controller repository on GitHub, at the commit this page was made from: the board is PCB/old/v1/hot-mainboard.kicad_pcb and its schematic PCB/mainboard/hot-mainboard.kicad_pro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hot mainboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask szymonPJO before reusing the design.