

Mops esp8266
Alternative PCB for MOPS mini PM2.5 sensor
- Size
- 56.5 × 52.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 23
- Pads
- 142
- Tracks, vias
- 410, 36
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Oct 2020
- Updated
- 6 Dec 2020
Overview
Mops esp8266 is an open-source printed circuit board by sztsian, from the sztsian/mops-esp8266 repository on GitHub. It is a 2-layer board of 56.5 × 52.7 mm with 37 parts on 23 nets, routed with 410 tracks and 36 vias.
It is built around the ESP-12F, CH330N and PMS7003M, with the WS2812B among its other parts. Its parts include 9 capacitors, 9 resistors, 4 ICs, 4 diodes and 3 connectors. It belongs with the ESP8266 boards of this library.
Main components
4ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesCH330N
SOP-8-20℃~+70℃ 15mA 2Mbps 3.3V、5V Transceiver SOP-8 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersPMS7003M
-- Sensor Modules ROHSBeijing PlantowerSensor ModulesWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C3, C6, C7, C8, C9, C10, C11 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4, R6, R8, R11 |
| 5 | M2 | MountingHole:MountingHole_2.2mm_M2 | MK1, MK2, MK3, MK4, MK5 |
| 4 | WS2812B | zsun-symbols:LED_DY-S352818_RGBC_6812-2T | D1, D2, D3, D4 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12, R13 |
| 2 | ESP-12F | RF_Module:ESP-12E | U2, U6 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | AP1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | CH330N | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | Ext_I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J3 |
| 1 | M1 | MountingHole:MountingHole_2.2mm_M2 | MK6 |
| 1 | PMS7003 | zsun-connectors:1.25mm_connector_Vertical-based-on-molex-502382-1x06 | J2 |
| 1 | SW_Flash | zsun-symbols:switch_4x4x1.5_real-5x5x1.5 | SW1 |
| 1 | USB_B_Micro | Icenowy_Connectors:USB_Micro-B_Connector | J1 |
Similar boards
- 2 layers71 × 74 mm

- 2 layers52.8 × 71.4 mm

- 2 layers98 × 49 mm

- 2 layers99.1 × 97.8 mm

- 2 layers70.1 × 43.2 mm

Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers99.9 × 99.9 mm

- 4 layers127 × 46 mm

Motherboard
KhazAkar/espws
[MOVED to GitLab: https://gitlab.com//r3xxar/espws] Weather station firmware for ESP8266 - mirror
116 parts4MIT - 2 layers80 × 60 mm

Questions
How big is the Mops esp8266 PCB?
It measures 56.5 × 52.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mops esp8266 use?
37 parts, built around the ESP-12F, CH330N, PMS7003M and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mops esp8266 KiCad files?
From the sztsian/mops-esp8266 repository on GitHub, at the commit this page was made from: the board is mops-esp8266.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mops esp8266 design in my own project?
Its repository states no licence, so its author keeps all rights: ask sztsian before reusing the design.