4 layers160 × 100 mm
2 layers160 × 100 mm
Bustermination
Synthron/ModLab3Modular Electronics Workstation
- Size
- 160 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 37
- Pads
- 170
- Tracks, vias
- 89, 0
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Mar 2023
- Updated
- 3 Jun 2024
Overview
Bustermination is an open-source printed circuit board by Synthron, from the Synthron/ModLab repository on GitHub. It is a 2-layer board of 160 × 100 mm with 20 parts on 37 nets, routed with 89 tracks and 0 vias.
It is built around the P6SMB16 and SMAJ5.0AJ. Its parts include 8 diodes, 6 resistors, 4 capacitors and 2 connectors.
Main components
2README
README.mdModLab
A modular station for your electronic workbench
The ModLab is designed to be housed in a 19" Rack with 3U.
It is the improved version of the (failed) Arduino Workstation I built a long time ago.
But now It will be bigger, better and way too complicated.
Work in Progress
To-Dos
Repo
- Rewrite documentation in english
- Write better introduction
- explain what exactly the ModLab is
- update changes for TFT
- Explain TFT Protocol
- Attach Schematics
- Cleanup Repo
Hardware
- Redesign modules with STM32
- Master Bus Controller with F767
- V1
- Review
- Ordered
- Assembled
- V2
- Change LCD connector
- omit external SRAM
- include header for Reset
- V1
- Diode/LED-Tester
- V1
- V2
- Variable Power Supply
- V1
- V2
- Fix Relais Footprint
- Feedback Dividers for correct level
- Review
- Ordered
- Assembled
- Symmetric Power Supply
- V1
- V2
- fix negative channel
- fix CC LEDs
- Review
- Ordered
- Assembled
- Waveform generator
- DSO-138 clone?
- Electronic Load
- Logic Tester
- Continuity tester
- Speaker Module
- Termination boards and Bus Extenders
- Master Bus Controller with F767
Software
- General
- Define CAN Protocol
- Define Command Structure
- Define Data Structure
- Define CAN Protocol
- Master Bus Controller
- STM32 code
- USB for Debug
- LCD
- Get Nextion Display working
- UI
- µC Interface
- Get Nextion Display working
- Busses
- CAN
- SPI - No Usecase so far
- I2C
- DAC - No Usecase so far
- RS485 - No Usecase so far
- ESP32 code
- comm with STM
- OTA
- basic web interface
- STM32 code
- Diode Tester code
- CAN
- Testing Sequence
- ADC
- SymPSU
- PWM Signals
- ADC
- CAN-Interface
- Power SMPS
- PWM Signals
- ADC
- CAN-Interface
- Waveform Generator
- PWM Signals
- AD9833
- CAN-Interface
- Power Monitor
- Voltage Measurement
- Current Measurement
- I2C communication
ModLab Lib Tracker:
- SymPSU
- Diode-Tester
- SMPS
- Load
- F-Gen
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100µ | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1, C2, C3, C4 |
| 4 | LED | LED_THT:LED_D3.0mm | D5, D6, D7, D8 |
| 2 | 120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R6 |
| 2 | 6k8 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R4 |
| 2 | P6SMB16 | Diode_SMD:D_SMA | D3, D4 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 2k2 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | DIN41612_02x32_AC | Connector_DIN:DIN41612_C_2x32_Female_Vertical_THT | J1 |
| 1 | DIN41612_02x32_AC | eigene:VG64_Euro | J2 |
| 1 | P6SMB26 | Diode_SMD:D_SMA | D2 |
| 1 | SMAJ5,0A | Diode_SMD:D_SMA | D1 |
Questions
How big is the Bustermination PCB?
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bustermination use?
20 parts, built around the P6SMB16 and SMAJ5.0AJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bustermination KiCad files?
From the Synthron/ModLab repository on GitHub, at the commit this page was made from: the board is Hardware/V3/Bustermination/Bustermination.kicad_pcb and its schematic Hardware/V3/Bustermination/Bustermination.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bustermination design in my own project?
Its repository states no licence, so its author keeps all rights: ask Synthron before reusing the design.
More from Synthron/ModLab
8- 4 layers160 × 100 mm
- 4 layers160 × 100 mm
- 2 layers160 × 100 mm
- 4 layers160 × 100 mm
- 2 layers160 × 100 mm
- 4 layers160 × 100 mm
- 2 layers160 × 100 mm
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772