2 layers44.2 × 32.6 mm
Wiring
esp-ebus/ebus-adapter-hardware
This repo conains KiCAD design of eBUS bus powered (without external supply) adapter to WiFi.
49 parts44
2 layers9.1 × 23.4 mm
TemperatureAdapter
synthetos/gQuintic-TemperatureAdapterThermistor and PT100 resistance temperature device adapter for gQuintic boards and similar
- Size
- 9.1 × 23.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 8
- Pads
- 36
- Tracks, vias
- 123, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Jul 2018
- Updated
- 4 Jul 2018
Overview
TemperatureAdapter is an open-source printed circuit board by synthetos, from the synthetos/gQuintic-TemperatureAdapter repository on GitHub, published under the MIT licence. It is a 2-layer board of 9.1 × 23.4 mm with 16 parts on 8 nets, routed with 123 tracks and 8 vias.
It is built around the LMV358. Its parts include 7 resistors, 2 capacitors, 2 connectors, 1 IC and 1 diode.
Main components
1README
README.mdgQuintic-TemperatureAdapter
Thermistor and PT100 resistance temperature device adapter for gQuintic boards and similar
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | _Passive:R_0402 | R1, R3, R4, R6 |
| 3 | Fiducial_Top | _Connector:Fiducial_0.040_Top | FID1, FID2, FID3 |
| 2 | 0.1uF | _Passive:C_0402 | C1, C2 |
| 2 | 4.7K | _Passive:R_0402 | R2, R7 |
| 1 | 100R | _Passive:R_0402 | R5 |
| 1 | 22-27-2021 | _Connector:0.100_1x2_RA_left | J1 |
| 1 | 22-27-2031 | _Connector:0.100_1x3_RA_left | J2 |
| 1 | LMV358 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U1 |
| 1 | MM3Z3V0ST1G | Diodes_SMD:D_SOD-323 | D1 |
Similar boards
- 4 layers48.5 × 33.5 mm
- 4 layers100 × 20 mm
- 4 layers89 × 60.5 mm
- 2 layers64.8 × 62 mm
- 2 layers41.5 × 35.5 mm
OpenEstim++
humancomputerintegration/BOH-Electro-Tactile
This is the repository for PCB schematics and Arduino codes used for the "Full-Hand Electro Tactile Feedback without Obstructing Palmar Side of Hand" paper (ACM CHI2023).
28 parts13 - 2 layers68.6 × 53.3 mm
- 4 layers206.7 × 105.8 mm
32-channel current source
M4a1x/nmr-spectrometer
My master thesis at D-CHAB (ETH Zürich) - Building a 25MHz NMR spectrometer
324 parts11GPL-3.0
Questions
How big is the TemperatureAdapter PCB?
It measures 9.1 × 23.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TemperatureAdapter use?
16 parts, built around the LMV358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TemperatureAdapter KiCad files?
From the synthetos/gQuintic-TemperatureAdapter repository on GitHub, at the commit this page was made from: the board is TemperatureAdapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TemperatureAdapter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).