2 layers44.2 × 32.6 mm
Wiring
esp-ebus/ebus-adapter-hardware
This repo conains KiCAD design of eBUS bus powered (without external supply) adapter to WiFi.
49 parts44
2 layers9.7 × 16 mm
LoadCell
synthetos/gQuintic-LoadCellLoad cell adapter for gQuintic motion controller boards and similar
- Size
- 9.7 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 8
- Pads
- 32
- Tracks, vias
- 112, 3
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 4 May 2018
- Updated
- 1 Jul 2018
Overview
LoadCell is an open-source printed circuit board by synthetos, from the synthetos/gQuintic-LoadCell repository on GitHub, published under the MIT licence. It is a 2-layer board of 9.7 × 16 mm with 13 parts on 8 nets, routed with 112 tracks and 3 vias.
It is built around the LMV358. Its parts include 4 resistors, 2 capacitors, 2 connectors, 1 IC and 1 diode. It belongs with the sensors and measurement boards of this library.
Main components
1README
README.mdgQuintic-LoadCell
Load cell adapter for gQuintic motion controller board
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Fiducial_Top | _Connector:Fiducial_0.040_Top | FID1, FID2, FID3 |
| 2 | 1K | _Passive:R_0402 | R2, R3 |
| 2 | 1uF | _Passive:C_0402 | C1, C2 |
| 2 | 390K | _Passive:R_0402 | R1, R4 |
| 1 | 0.100_1X4 | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.00mm | J1 |
| 1 | 22-27-2031 | _Connector:0.100_1x3_small | J2 |
| 1 | LMV358 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U1 |
| 1 | MM3Z3V0ST1G | Diodes_SMD:D_SOD-323 | D1 |
Similar boards
- 4 layers48.5 × 33.5 mm
- 4 layers100 × 20 mm
- 4 layers89 × 60.5 mm
- 2 layers64.8 × 62 mm
- 2 layers41.5 × 35.5 mm
OpenEstim++
humancomputerintegration/BOH-Electro-Tactile
This is the repository for PCB schematics and Arduino codes used for the "Full-Hand Electro Tactile Feedback without Obstructing Palmar Side of Hand" paper (ACM CHI2023).
28 parts13 - 2 layers68.6 × 53.3 mm
- 4 layers206.7 × 105.8 mm
32-channel current source
M4a1x/nmr-spectrometer
My master thesis at D-CHAB (ETH Zürich) - Building a 25MHz NMR spectrometer
324 parts11GPL-3.0
Questions
How big is the LoadCell PCB?
It measures 9.7 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LoadCell use?
13 parts, built around the LMV358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LoadCell KiCad files?
From the synthetos/gQuintic-LoadCell repository on GitHub, at the commit this page was made from: the board is LoadCell.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LoadCell design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).