2 layers47 × 70.5 mm
ESP32
syauqibilfaqih/Pullback-Device
Low-cost open source pullback device for varicose vein surgery
14 parts2MIT
2 layers29.8 × 42.5 mm
DriverUnit
syauqibilfaqih/Pullback-Device2Low-cost open source pullback device for varicose vein surgery
- Size
- 29.8 × 42.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 12
- Pads
- 27
- Tracks, vias
- 44, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Oct 2023
- Updated
- 30 Aug 2024
Overview
DriverUnit is an open-source printed circuit board by syauqibilfaqih, from the syauqibilfaqih/Pullback-Device repository on GitHub, published under the MIT licence. It is a 2-layer board of 29.8 × 42.5 mm with 8 parts on 12 nets, routed with 44 tracks and 0 vias.
It is built around the L293D. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdPullback-Device
This is an overview of a low-cost open source pullback device for varicose vein surgery.
Usage
Look at the video attached bellow: https://youtu.be/Uo2tgYB1XSM
For Developers
- Get the mechanical design at the folder "Mechanical" of this repository.
- Get the schematic and PCB layout at the folder "Electrical" of this repository.
- Get the source code by clonning this repository:
git clone https://github.com/syauqibilfaqih/Pullback-Device.gitThen, go to the folder "SourceCode". Make sure that you already have PlatformIO on your Visual Studio Code.
Contact us
I realized that this readme still only contained short information right now. Should you have any question, don't hesitate to contact me at alisyauqibilfaqih@gmail.com
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x02_Male | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | 5VSource1, 12VSource1, MotorPin1, PWMpin1 |
| 1 | L293D | Package_DIP:DIP-16_W7.62mm | U1 |
The 5 most common of 8 parts.
Questions
How big is the DriverUnit PCB?
It measures 29.8 × 42.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DriverUnit use?
8 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DriverUnit KiCad files?
From the syauqibilfaqih/Pullback-Device repository on GitHub, at the commit this page was made from: the board is Electrical/DriverUnit/DriverUnit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DriverUnit design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from syauqibilfaqih/Pullback-Device
2- 2 layers71.8 × 23.5 mm
PowerUnit
syauqibilfaqih/Pullback-Device
Low-cost open source pullback device for varicose vein surgery
6 parts2MIT
Similar boards
- 2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70 - 2 layers84.3 × 58.4 mm
EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers56.4 × 72.6 mm
Ras pi hat
geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…
8 parts13 - 2 layers87.5 × 70 mm
- 2 layers92.5 × 62.5 mm
DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 2 layers47.5 × 49.5 mm
- 2 layers120.7 × 184.1 mm
- 2 layers90 × 53.4 mm
