2 layers172 × 152.9 mm
2 layers35 × 35 mm
JTAG adapter
Swij/JTAG-adapter1- Size
- 35 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 20
- Pads
- 87
- Tracks, vias
- 158, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Jan 2019
- Updated
- 30 Aug 2019
Overview
JTAG adapter is an open-source printed circuit board by Swij, from the Swij/JTAG-adapter repository on GitHub. It is a 2-layer board of 35 × 35 mm with 15 parts on 20 nets, routed with 158 tracks and 13 vias.
It is built around the MIC5504-3.3YM5. Its parts include 5 connectors, 2 capacitors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
1Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | ~ | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP4, JP6 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 10-pin JTAG 0.05" | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J4 |
| 1 | 10-pin ST-Link 0.1" | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Horizontal | J5 |
| 1 | 20-pin JTAG 0.1" | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Horizontal | J3 |
| 1 | 20-pin JTAG 0.1" | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J1 |
| 1 | 6-pin Tag-Connect | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J6 |
| 1 | LOGO | project_footprints:Logo_Endian_Symbol_8x9mm | G*** |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | ~ | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP5 |
Questions
How big is the JTAG adapter PCB?
It measures 35 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the JTAG adapter use?
15 parts, built around the MIC5504-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the JTAG adapter KiCad files?
From the Swij/JTAG-adapter repository on GitHub, at the commit this page was made from: the board is JTAG-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the JTAG adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask Swij before reusing the design.
Similar boards
- 2 layers22.9 × 36.7 mm
Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers78 × 130 mm
Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT - 2 layers96.5 × 55 mm
- 2 layers120 × 130 mm
SingularitySurfer V1
nkrackow/SingularitySurfer-FPGA-Lock-In-Amplifier
Repository for the development of an FPGA based DSP Lock-In Amplifier
174 parts80MIT - 4 layers60.2 × 20.8 mm
PhaseLatchMini
AndersBNielsen/PhaseLatchMini
High-rate continuous streaming of interleaved dual ADC (I/Q) samples over USB Full‑Speed (FS) using only the built‑in CDC class on an STM32F103C8 ("Blue Pill" style) board.
63 parts72 - 2 layers98 × 56 mm
Thermal pcb
Badbird5907/thermal-camera
My design of a cheap and affordable thermal camera
68 parts59MIT - 4 layers58 × 38 mm
Qspimux2-prog
felixheld/qspimux
QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests
99 parts57CC-BY-SA-4.0