Skip to the content
4 layers160 × 100.1 mmMini8086, the printed circuit board in 3D

A small 8086 computer system.

Size
160 × 100.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
51
Nets
118
Pads
486
Tracks, vias
2,278, 250
Pours
3
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
2 Sep 2020
Updated
14 Jul 2023

Overview

Mini8086 is an open-source printed circuit board by svpetry, from the svpetry/Mini8086 repository on GitHub. It is a 4-layer board of 160 × 100.1 mm with 51 parts on 118 nets, routed with 2,278 tracks and 250 vias.

It is built around the 74HC245D, 74HC573 and 74HC08D, with the 74HC32D among its other parts. Its parts include 17 capacitors, 15 ICs, 14 resistors, 3 crystals and 1 switch.

Main components

4

README

README.md

Mini8086

A small, extensible Intel 8086 based computer system.

PCBs

Some boards are made with Eagle but then I switched to KiCad because my Eagle License covers only 2 layer boards and I don't like their new licensing model (it's too expensive for hobbyists). Schematics and layout are contained in the folders Eagle and KiCad.

Backplane (Eagle)

First revision of the system backplane with 6 slots and a power connector.

Backplane (KiCad)

Second revision of the backplane. Has 7 slots and two power connectors (one of them USB-C).

RAM board (Eagle)

RAM board with 512 KB SRAM.

Info board (KiCad)

A 16x2 HD44780 based LCD can be mounted to this board. Also contains some LEDs for important signals.

LED board (KiCad)

Information board with LEDs for the busses and all important signals.

CPU board Rev 1 (KiCad, "main")

First revision of the CPU board, contains socket for an Intel 8086 CPU, ROM and other important system chips:

  • Intel 8259 interrupt controller
  • Intel 8254 timer

CPU board Rev 2 (KiCad, "mainv2")

Second revision of the CPU board where I replaced most of the logic chips with an Altera CPLD. Also contains 1 MB SRAM so the external RAM board is not needed.

VGA board (KiCad)

Simple graphics card with 128 KB SRAM and VGA output. Supported modes:

  • text mode 80x25 characters, 256 colors (resolution 640x400 pixels)
  • 320x200, 256 colors
  • 320x400, 256 colors
  • 640x200, 256 colors

I/O board (KiCad)

  • Slots for SD and MicroSD cards. Simple SPI controller implemented in an Altera CPLD.
  • PS/2 keyboard connector
  • RS232 connector
  • I²C controller with a RTC module, BMP sensor module and EEPROM connected.

Parts

51
QtyValueFootprintReferences
13100nCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC3, C4, C5, C6, C7, C8, C9, C10, C13, C14, C15, C16, C17
63K3Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR9, R10, R11, R12, R13, R14
54K7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R5, R6, R7, R8
374HC573Package_DIP:DIP-20_W7.62mm_LongPadsU5, U6, U7
227C512Socket:DIP_Socket-28_W11.9_W12.7_W15.24_W17.78_W18.5_3M_228-1277-00-0602JU8, U9
2510Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R4
274HC245Package_DIP:DIP-20_W7.62mm_LongPadsU1, U3
11 MHzOscillator:Oscillator_DIP-14X1
1100µCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC11
110µCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC1
127C512Package_DIP:DIP-28_W15.24mm_Socket_LongPadsU12
130 MHzCrystal:Crystal_HC18-U_VerticalY1
130pCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC2
139Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
147µCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC12
174HC08Package_DIP:DIP-14_W7.62mm_LongPadsU15
174HC245Package_SO:SO-20_12.8x7.5mm_P1.27mmU14
174HC32Package_DIP:DIP-14_W7.62mm_LongPadsU13
18086Package_DIP:DIP-40_W15.24mm_Socket_LongPadsU4
18254Package_DIP:DIP-24_W15.24mm_Socket_LongPadsU10
18259Package_DIP:DIP-28_W15.24mm_Socket_LongPadsU11
18284Package_DIP:DIP-18_W7.62mm_Socket_LongPadsU2
1Edge72Mini8086:BUS_72X2
1LOGOMini8086:hamtaroG***
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW1

More from svpetry/Mini8086

7
  • 2 layers99.8 × 100.8 mmLed board, the printed circuit board in 3D

    Led board

    svpetry/Mini8086

    A small 8086 computer system.

    121 parts3
  • 4 layers160 × 111.8 mmVga, the printed circuit board in 3D

    Vga

    svpetry/Mini8086

    A small 8086 computer system.

    90 parts3
  • 4 layers131.1 × 99.1 mmIo board, the printed circuit board in 3D

    Io board

    svpetry/Mini8086

    A small 8086 computer system.

    89 parts3
  • 4 layers119.1 × 99.1 mmIo board, the printed circuit board in 3D

    Io board

    svpetry/Mini8086

    A small 8086 computer system.

    87 parts3
  • 4 layers98.8 × 100.1 mmMain v2, the printed circuit board in 3D

    Main v2

    svpetry/Mini8086

    A small 8086 computer system.

    69 parts3
  • 2 layers160 × 100.1 mmBackplane, the printed circuit board in 3D

    Backplane

    svpetry/Mini8086

    A small 8086 computer system.

    38 parts3
  • 2 layers99.1 × 99.6 mmInfo board, the printed circuit board in 3D

    Info board

    svpetry/Mini8086

    A small 8086 computer system.

    30 parts3

Similar boards

  • 2 layers175.3 × 80.6 mmSuS, the printed circuit board in 3D

    SuS

    stonedDiscord/Automatenplatinen

    Reverse engineerte Hardware aus deutschen Spielautomaten.

    88 parts5BSD-2-Clause
  • 4 layers177 × 152.1 mmAvboard tht2, the printed circuit board in 3D

    Avboard tht2

    clydeshaffer/gametank

    design files for the gametank hardware implementation

    139 parts150
  • 2 layers131.9 × 164.6 mmCft alu, the printed circuit board in 3D

    Cft alu

    alexiosc/cft

    The CFT homebrew minicomputer

    138 parts6GPL-3.0
  • 4 layers100 × 115 mmTransistorfet z280 Z280-SBC, the printed circuit board in 3D

    Transistorfet z280 Z280-SBC

    punkfab/pcb-corpus

    235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

    56 parts1
  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers191.8 × 121.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    109 parts184
  • 2 layers306.1 × 130.2 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64-Home-Computer

    Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

    132 parts94
  • 2 layers178 × 711 mmMSAP-2 rev.A SMD, the printed circuit board in 3D

    MSAP-2 rev.A SMD

    mehrantsi/MSAP-2

    An 8-bit computer. Successor to MSAP-1

    658 parts13MIT

Questions

How big is the Mini8086 PCB?

It measures 160 × 100.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Mini8086 use?

51 parts, built around the 74HC245D, 74HC573, 74HC08D and 74HC32D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mini8086 KiCad files?

From the svpetry/Mini8086 repository on GitHub, at the commit this page was made from: the board is KiCad/main/main.kicad_pcb and its schematic KiCad/backplane/backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mini8086 design in my own project?

Its repository states no licence, so its author keeps all rights: ask svpetry before reusing the design.