Skip to the content
2 layers100 × 50 mmPocket icetop, the printed circuit board in 3D

LED scale models of the IceCube Neutrino Observatory

Size
100 × 50 mm
Copper layers
2
Thickness
1.55 mm
Parts
38
Nets
41
Pads
139
Tracks, vias
252, 11
Pours
4
Routed
Yes
KiCad
KiCad 4
Created
20 Sep 2020
Updated
20 Sep 2020

Overview

Pocket icetop is an open-source printed circuit board by svanheule, from the svanheule/icecube-display repository on GitHub. It is a 2-layer board of 100 × 50 mm with 38 parts on 41 nets, routed with 252 tracks and 11 vias.

It is built around the ATMEGA32U4-AU. Its parts include 10 capacitors, 8 resistors, 5 connectors, 3 switches and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

IceCube LED display

This repository contains design documents and firmware source code for a number of LED displays designed to show IceCube event data.

Integration in Steamshovel

A Steamshovel artist was written using pyusb to enable remote rendering. This allows people already familiar with the IceCube offline event viewer to also be quickly able to get a new LED display up and running.

Firmware

The display firmware is written using bare-metal C to provide close integration with the hardware. Writing a new firmware implementation can take up quite some time, so try to re-use an existing design if possible. All source code is contained in the firmware directory.

Source code documentation containing guidelines for new display and a short description of existing displays can be compiled using Doxygen:

{.sh}
$ doxygen Doxyfile

A copy of the documentation may be found at http://icecube.wisc.edu/~svanheule/icecube-display.

Builds of the microcontroller firmwares can be found at http://icecube.wisc.edu/~svanheule/images. These builds can be used to upgrade existing devices, or provide a starting point for uploading the device EEPROM when using a new device.

Hardware

The hardware directory contains design documents for the displays. This includes both mechanical documents for the display construction, as well as possible PCB design documents.

Parts

38
QtyValueFootprintReferences
5100nCapacitors_SMD:C_0603_HandSolderingC5, C6, C7, C8, C9
410kResistors_SMD:R_0603_HandSolderingR3, R6, R7, R8
21kResistors_SMD:R_0603_HandSolderingR4, R5
222Resistors_SMD:R_0603_HandSolderingR1, R2
26.8pCapacitors_SMD:C_0603_HandSolderingC1, C2
110uCapacitors_SMD:C_0603_HandSolderingC4
11uCapacitors_SMD:C_0805_HandSolderingC10
11uCapacitors_SMD:C_0603_HandSolderingC3
15V_DCConnect:BARREL_JACKCON1
1ATMEGA32U4-AUHousings_QFP:TQFP-44_10x10mm_Pitch0.8mmU1
1CrystalCrystals:Crystal_HC49-U_VerticalY1
1ICSPPin_Headers:Pin_Header_Straight_2x03P3
1IceCubepocket-icetop:icecube-logoG***
1LED_POWERpocket-icetop:IDC_socket_2x08P2
1LED_STRIPPin_Headers:Pin_Header_Straight_1x04P4
1LOGOpocket-icetop:ugent-logoG***
1POWERLEDs:LED-3MMD1
1RESETpocket-icetop:SW_Tactile_SPST_AngledSW1
1SW_DEMO1pocket-icetop:SW_Tactile_SPST_AngledSW2
1SW_DEMO2pocket-icetop:SW_Tactile_SPST_AngledSW3
1USB_ACTLEDs:LED-3MMD2
1USB_Bpocket-icetop:USB_BP1
1ferritepocket-icetop:L_0603_HandSolderingL1

The 33 most common of 38 parts.

More from svanheule/icecube-display

2
  • 2 layers78.7 × 44.4 mmData connector pcbs, the printed circuit board in 3D

    Data connector pcbs

    svanheule/icecube-display

    LED scale models of the IceCube Neutrino Observatory

    9 parts
  • 2 layers45 × 29 mmString adapter, the printed circuit board in 3D

    String adapter

    svanheule/icecube-display

    LED scale models of the IceCube Neutrino Observatory

    5 parts

Similar boards

  • 2 layers243.2 × 106 mm3W6, the printed circuit board in 3D

    3W6

    weteor/3W6

    a small compact 3x5+3 split ortho keyboard

    113 parts488
  • 2 layers228.4 × 85 mmLeChiffre, the printed circuit board in 3D

    LeChiffre

    tominabox1/Le-Chiffre-Keyboard

    Great thanks goes to Jake at P3D for really making the case amazing and open sourcing his work. Check him out at P3Dstore.com

    105 parts183GPL-3.0
  • 2 layers228.6 × 76.8 mmSchwann Rev0.5b, the printed circuit board in 3D

    Schwann Rev0.5b

    The-Royal/The_Royal_Open-Source-Projects

    A Master Repository For All things Royal Made

    127 parts159MIT
  • 2 layers30 × 65 mmKeyboard mcu, the printed circuit board in 3D

    Keyboard mcu

    dpapavas/lagrange-keyboard

    A configurable, handwired, ergonomic keyboard

    26 parts137AGPL-3.0
  • 2 layers88.4 × 80 mmLHS Controller PCB, the printed circuit board in 3D

    LHS Controller PCB

    dmcke5/ZenDeck

    This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.

    76 parts133CERN-OHL-S-2.0
  • 2 layers259.5 × 89.1 mmSteno, the printed circuit board in 3D

    Steno

    crides/steno

    Embedded steno firmware + custom steno PCBs

    61 parts75MIT
  • 2 layers99.1 × 99.1 mmPower supply panelized, the printed circuit board in 3D

    Power supply panelized

    thebiguno/microcontroller-projects

    A home for a bunch of microcontroller projects which don't warrant their own repos.

    223 parts75
  • 2 layers323.9 × 95.1 mmUnSplit, the printed circuit board in 3D

    UnSplit

    swiftrax/UnSplit

    Ergo 40% mechanical keyboard with all components on the top with diodes arranged in an array

    110 parts68GPL-2.0

Questions

How big is the Pocket icetop PCB?

It measures 100 × 50 mm and has 2 copper layers, 1.55 mm thick.

What parts does the Pocket icetop use?

38 parts, built around the ATMEGA32U4-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pocket icetop KiCad files?

From the svanheule/icecube-display repository on GitHub, at the commit this page was made from: the board is hardware/pocket-icetop/pcb/pocket-icetop.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pocket icetop design in my own project?

Its repository states no licence, so its author keeps all rights: ask svanheule before reusing the design.