
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

Ir sensor design is an open-source printed circuit board by suumitrajput, from the suumitrajput/PCB_designs repository on GitHub. It is a 2-layer board of 46.5 × 14 mm with 9 parts on 7 nets, routed with 39 tracks and 5 vias.
It is built around the LM358. Its parts include 3 resistors, 3 diodes, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.
KiCad | LM358 Op-Amp | SMD/THT | Analog Circuits | Simulation
PCB-based IR sensor module for object detection using IR reflection principle. Signal conditioning handled by LM358 op-amp with adjustable sensitivity via potentiometer.
| Component | Purpose |
|---|---|
| IR LED | Infrared transmitter |
| Photodiode / Phototransistor | IR receiver |
| LM358 Op-Amp | Signal amplification & comparison |
| Resistors | Biasing & current limiting |
| Potentiometer | Sensitivity adjustment |
| Indicator LED | Detection status output |
| 5V Power Supply | Module power |
Sumit — Electronics & Communication Engineering, DTU
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LED | LED_THT:LED_D5.0mm_Horizontal_O3.81mm_Z3.0mm | D1, D2 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296X_Horizontal | RV1 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D3 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm_SMDSocket_SmallPads | U1 |

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance


tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen


starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

It measures 46.5 × 14 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the suumitrajput/PCB_designs repository on GitHub, at the commit this page was made from: the board is ir_sensor_design.kicad_pcb and its schematic ir_sensor_design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask suumitrajput before reusing the design.