

Sixpace60 assembly
This project is licensed under the MIT License - see the LICENSE file for details.
- Size
- 283.8 × 93.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 141
- Nets
- 92
- Pads
- 651
- Tracks, vias
- 914, 127
- Pours
- 448
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Jun 2025
- Updated
- 17 Jun 2025
Overview
Sixpace60 assembly is an open-source printed circuit board by susumuota, from the susumuota/sixpace60 repository on GitHub, published under the MIT licence. It is a 2-layer board of 283.8 × 93.3 mm with 141 parts on 92 nets, routed with 914 tracks and 127 vias.
Its parts include 70 switches, 69 diodes, 1 IC and 1 connector.
README
README.mdInfinite Monkey Sixpace60
Installation
- Install QMK Toolbox to flash the firmware
- Open the QMK Toolbox
- Connect your keyboard
- Press
Openand select the firmware file firmware/infinitemonkey_sixpace60_via.hex for VIA or firmware/infinitemonkey_sixpace60_vial.hex for VIAL - Press the reset button on your keyboard twice quickly to put it into bootloader mode
- Press
Flashin the QMK Toolbox
Setting Up with VIA
- Go to VIA
- Press
SETTINGSand turn onShow Design tab - Press
DESIGN, pressLoad, and select qmk/keyboards/infinitemonkey/sixpace60/via.json - Press
CONFIGUREpressAuthorize device +and selectSixpace60
Setting Up with VIAL
- Go to Vial Web
- Press
Start Vial - Select
Sixpace60
Building the Firmware
Install Docker to build the firmware.
Build for VIA and Remap
git clone https://github.com/qmk/qmk_firmware.git
git clone https://github.com/susumuota/sixpace60.git
cp -rp sixpace60/qmk/keyboards/infinitemonkey qmk_firmware/keyboards
cd qmk_firmware
RUNTIME="docker" SKIP_FLASHING_SUPPORT=1 util/docker_cmd.sh make infinitemonkey/sixpace60:viaBuild for VIAL
git clone https://github.com/vial-kb/vial-qmk.git
git clone https://github.com/susumuota/sixpace60.git
cp -rp sixpace60/qmk/keyboards/infinitemonkey vial-qmk/keyboards
cd vial-qmk
RUNTIME="docker" SKIP_FLASHING_SUPPORT=1 util/docker_cmd.sh make infinitemonkey/sixpace60:vialLicense
This project is licensed under the MIT License - see the LICENSE file for details.
Author
Parts
141| Qty | Value | Footprint | References |
|---|---|---|---|
| 69 | D | kbd_Parts:Diode_SMD | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +53 |
| 59 | SW_Push | kbd_SW:CherryMX_Hotswap_1u_Small3 | SW1, SW10, SW11, SW12, SW13, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +43 |
| 5 | SW_Push | kbd_SW:CherryMX_Hotswap_1.25u | SW4, SW9, SW14, SW49, SW63 |
| 3 | SW_Push | kbd_SW:CherryMX_Hotswap_1.75u | SW3, SW8, SW62 |
| 2 | SW_Push | kbd_SW:CherryMX_Hotswap_1.5u | SW2, SW66 |
| 1 | Conn_01x02 | kbd_Parts:Battery_BMP_2pin | J1 |
| 1 | Micon_BLEMicroPro | kbd_Parts:Micon_BMP_7sKB | U1 |
| 1 | SW_Push | kbd_Parts:ResetSW | SW70 |
Similar boards
- 2 layers198.1 × 95.3 mm

- 2 layers104 × 66 mm

LCD DRIVER Rev B
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
141 parts1.5k - 2 layers73 × 139 mm

OpenRPNCalc
apoluekt/OpenRPNCalc
Open-source and open-hardware scientific RPN calculator
141 parts414CERN-OHL-P-2.0 - 2 layers111.3 × 106.4 mm

Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers362.4 × 105.3 mm
/keyboard.kicad_pcb.jpg?size=s&soon)
- 2 layers288.1 × 142.4 mm

- 2 layers144.8 × 88.9 mm

- 2 layers100 × 100 mm

Questions
How big is the Sixpace60 assembly PCB?
It measures 283.8 × 93.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sixpace60 assembly use?
141 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sixpace60 assembly KiCad files?
From the susumuota/sixpace60 repository on GitHub, at the commit this page was made from: the board is kicad/sixpace60_assembly/sixpace60_assembly.kicad_pcb and its schematic kicad/sixpace60_assembly/sixpace60_assembly.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sixpace60 assembly design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).



