Skip to the content
2 layers80.4 × 101 mmPerenquen, the printed circuit board in 3D

My first micromouse robot

Size
80.4 × 101 mm
Copper layers
2
Thickness
1.6 mm
Parts
90
Nets
133
Pads
348
Tracks, vias
946, 74
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
17 Oct 2017
Updated
7 Oct 2024

Overview

Perenquen is an open-source printed circuit board by supernudo, from the supernudo/perenquen repository on GitHub. It is a 2-layer board of 80.4 × 101 mm with 90 parts on 133 nets, routed with 946 tracks and 74 vias.

It is built around the DSPIC33EP512MC806-I/PT, TC4427COA and ZXMHC3A01T8TA, with the LY3200ALH and ULN2003A among its other parts. Its parts include 30 resistors, 23 capacitors, 12 ICs, 9 diodes and 5 transistors. It belongs with the robots and motor control boards and the PIC boards of this library.

Main components

5

README

README.md

Perenquen

Robot de laberinto o micromouse.

Perenquén es mi primer robot de laberinto. Tiene una tracción diferencial de 4 ruedas diseñada para acelerar en recta a 10m/s/s y alcanza una velocidad de 3m/s. La posición de su centro de masa le permite hacer giros precisos sobre sus ruedas delanteras sin derrapar, a pesar de tener 4 ruedas. Para controlar su velocidad y posición utiliza encoders magnéticos. Durante las curvas utiliza un giroscopo para girar con precisión, independientemente de si derrapan las ruedas. Además, utiliza 4 sensores infrarrojos (2 delanteros y 2 diagonales) para navegar por el laberinto.

Autor

Javier Baliñas Santos

Licencia

Todos estos productos están liberados mediante Creative Commons Attribution-ShareAlike 4.0 International License.
All these products are released under Creative Commons Attribution-ShareAlike 4.0 International License.

Parts

90
QtyValueFootprintReferences
11100nCapacitors_SMD:C_0603C3, C10, C11, C15, C16, C17, C18, C20, C21, C22, C23
510kResistors_SMD:R_0603R2, R3, R9, R11, R14
51kResistors_SMD:R_0603R15, R16, R17, R18, R21
51k8 1%Resistors_SMD:R_0603R22, R23, R24, R29, R30
51uCapacitors_SMD:C_0805C1, C4, C12, C13, C14
447kResistors_SMD:R_0603R4, R5, R7, R8
30RResistors_SMD:R_0805R6, R12, R13
3220u 10VCapacitors_Tantalum_SMD:CP_Tantalum_Case-X_EIA-7343-43_ReflowC2, C8, C9
210k 1%Resistors_SMD:R_0603R10, R20
212R 1%Resistors_SMD:R_0805R25, R28
25.6R 1%Resistors_SMD:R_0805R26, R27
2AS5045BHousings_SSOP:SSOP-16_5.3x6.2mm_Pitch0.65mmU9, U10
2MCP1700TO_SOT_Packages_SMD:SOT-23U1, U6
2RX-LDLEDs:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mmQ1, Q2
2TC4427COASMD_Packages:SOIC-8-NU3, U4
2ZXMHC3A01T8Housings_SOIC:Zetex_SM8U7, U8
110Mhzbalitronics_kicad_footprint_lib:Resonator_Murata_CSTCE_3pinY1
110nCapacitors_SMD:C_0603C7
110uCapacitors_SMD:C_0603C6
110u 6V LowESRCapacitors_Tantalum_SMD:CP_Tantalum_Case-U_EIA-6032-15_ReflowC19
120k 1%Resistors_SMD:R_0603R19
12R2 1%Resistors_SMD:R_0603R1
1450301014042Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmSW1
1470nCapacitors_SMD:C_0603C5
1BTSocket_Strips:Socket_Strip_Straight_1x06_Pitch2.54mmJ3
1DSPIC33EP512MC806Housings_QFP:TQFP-64_10x10mm_Pitch0.5mmU11
1ENC-LPin_Headers:Pin_Header_Angled_1x04_Pitch2.54mmJ4
1ENC-RPin_Headers:Pin_Header_Angled_1x04_Pitch2.54mmJ5
1FLASHLEDs:LED_D3.0mmQ5
1ICDPin_Headers:Pin_Header_Angled_1x05_Pitch2.54mmJ2
1LED1Diodes_SMD:D_0603D1
1LED2Diodes_SMD:D_0603D3
1LED3Diodes_SMD:D_0603D4
1LED4Diodes_SMD:D_0603D5
1LY3200ALHbalitronics_kicad_footprint_lib:Gyro_ST_LGA10U5
1M2940IMPX-5.0TO_SOT_Packages_SMD:SOT-223-3_TabPin2U2
1Motor-blockbalitronics_kicad_footprint_lib:Perenquen-motor-blockM1
1PWR-ONDiodes_SMD:D_0603D2
1PWR1Connectors_JST:JST_PH_B3B-PH-K_03x2.00mm_StraightJ1
1RSTButtons_Switches_SMD:SW_SPST_B3U-1000PSW2
1RX-LLEDs:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mmQ3
1RX-RLEDs:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mmQ4
1TX-LLEDs:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mmD6
1TX-LDLEDs:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mmD8
1TX-RLEDs:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mmD9
1TX-RDLEDs:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mmD7
1ULN2003AHousings_SSOP:SSOP-16_4.4x5.2mm_Pitch0.65mmU12
1USR1Buttons_Switches_SMD:SW_SPST_B3U-1000PSW3
1USR2Buttons_Switches_SMD:SW_SPST_B3U-1000PSW4

Similar boards

  • 4 layers152.4 × 86.4 mmGibbot v1, the printed circuit board in 3D

    Gibbot v1

    NxRLab/gibbot

    171 parts6
  • 2 layers107 × 54 mmInterface board 1, the printed circuit board in 3D

    Interface board 1

    Green-bms/SmartBMS

    Open source Smart Battery Management System

    63 parts756
  • 4 layers93.3 × 60.3 mmArduino 386EX V5, the printed circuit board in 3D

    Arduino 386EX V5

    dbalsom/arduinoX86

    An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

    56 parts114
  • 2 layers52 × 61 mmArduino motorfocus, the printed circuit board in 3D

    Arduino motorfocus

    fehlfarbe/arduino-motorfocus

    Arduino motorfocus with moonlite protocol for telescopes

    23 parts58MIT
  • 4 layers199.9 × 69.3 mmZaphod controller, the printed circuit board in 3D

    Zaphod controller

    Scottapotamas/zaphod-bot

    A DIY high performance delta-bot for fun, and lightpainting...

    251 parts53
  • 4 layers285.1 × 48.1 mmAyab esp32, the printed circuit board in 3D

    Ayab esp32

    AllYarnsAreBeautiful/ayab-hardware

    Contains the schematics and layouts for the AYAB Arduino shield

    246 parts50CC-BY-SA-4.0
  • 2 layersDrehorgel20, the printed circuit board in 3D

    Drehorgel20

    bixb922/crank-organ

    MIDI based crank organ software and hardware

    14 parts47MIT
  • 2 layers40 × 80 mmSplitflappcb, the printed circuit board in 3D

    Splitflappcb

    codingcatgirl/split-flap-fae-pcb

    Alternative drop-in replacement PCB for David Kingsman's split-flap display

    46 parts31Apache-2.0

Questions

How big is the Perenquen PCB?

It measures 80.4 × 101 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Perenquen use?

90 parts, built around the DSPIC33EP512MC806-I/PT, TC4427COA, ZXMHC3A01T8TA and LY3200ALH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Perenquen KiCad files?

From the supernudo/perenquen repository on GitHub, at the commit this page was made from: the board is Electronics/perenquen-board/perenquen.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Perenquen design in my own project?

Its repository states no licence, so its author keeps all rights: ask supernudo before reusing the design.