
Breakout 112pin Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit

Fuel Cell Control Stuff
Fuel cell control is an open-source printed circuit board by supermileage, from the supermileage/fuel-cell-control repository on GitHub, published under the MIT licence. It is a 2-layer board of 87.6 × 69.9 mm with 42 parts on 70 nets, routed with 304 tracks and 26 vias.
Its parts include 8 connectors, 7 resistors, 4 capacitors, 3 diodes and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Fuel Cell Control Stuff
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1.5k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 3 | Q_NMOS_GDS | Package_TO_SOT_SMD:SOT-89-3 | Q1, Q2, Q3 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 430k | Resistor_SMD:R_0603_1608Metric | R5, R7 |
| 2 | 820k | Resistor_SMD:R_0603_1608Metric | R4, R6 |
| 2 | Conn_01x10_Male | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_10-G-3.5_1x10_P3.50mm_Vertical | J7, J8 |
| 2 | Conn_01x15_Female | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J2, J5 |
| 2 | MUX506IDWR | digikey-footprints:SOIC-28_W7.5mm | U3, U4 |
| 1 | 12V | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP3 |
| 1 | 5V | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP5 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | BPump | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP2 |
| 1 | BigPump | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J4 |
| 1 | Fuse | digikey-footprints:3586KTR | F1 |
| 1 | GND | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP4 |
| 1 | InputPower | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J1 |
| 1 | LOGO | digikey-footprints:supermileagelogo3 | G*** |
| 1 | LPump | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP1 |
| 1 | LittlePump | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J3 |
| 1 | Mux1 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP7 |
| 1 | Mux2 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP8 |
| 1 | Relay | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J6 |
| 1 | RelayT | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP6 |

rusefi/rusefi
rusefi - GPL internal combustion engine control unit


hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 87.6 × 69.9 mm and has 2 copper layers, 1.6 mm thick.
42 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the supermileage/fuel-cell-control repository on GitHub, at the commit this page was made from: the board is pcb/fuel-cell-control/fuelCellControl/fuelCellControl.kicad_pcb and its schematic fcp-layout/fcp-layout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).