
OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

HF+6M lowpass and 4M highpass
Diplexer is an open-source printed circuit board by Supermagnum, from the Supermagnum/diplexer repository on GitHub. It is a 2-layer board of 157.1 × 101 mm with 39 parts on 12 nets, routed with 106 tracks and 208 vias.
It is built around the VJ1111D100JXRAJ, VJ1111D200JXRAJ and VJ1111D220JXRAJ, with the VJ1111D390JXRAJ among its other parts. Its parts include 20 capacitors, 10 inductors and 9 connectors.
HF+6M lowpass and 4M highpass
The lowpass filter has: 71.5mhz -42dB. Highpass filter 52.5mhz -45dB. 50.5mhz -50db
Highpass Ltspice analysis setup:

Highpass frequency analysis ( insertion loss, insertion phase, and return loss):

Highpass Z-in and Z out analysis:

Lowpass LTspice analysis setup:

Lowpass filter frequency analysis ( insertion loss, insertion phase, and return loss):

Lowpass filter Z-in and Z out:

PCB board screenshot:

I had to draw the 1111 SMD footprint because it wasn't included in the Kicad database. I hope that I haven't messed up. Shematic for the diplexer: https://raw.githubusercontent.com/Supermagnum/diplexer/refs/heads/main/diplexer.pdf
Inductors: You have to make these yourself! https://github.com/Supermagnum/diplexer/blob/main/Inductors.pdf
Suitable box: https://www.hammfg.com/part/1457N1601E
All bolt holes is M3.
Animation of assembled PCB: https://youtu.be/Ffxkk6wFYqY
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 12pF | sparkfun-electromech:CAPC2927X178N | C2, C3, C4, C12, C13, C14 |
| 6 | Conn_01x01_Pin | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | J4, J5, J6, J7, J9, J10 |
| 4 | 10pF | sparkfun-electromech:CAPC2927X178N | C15, C17, C18, C19 |
| 3 | 100pF | sparkfun-electromech:CAPC2927X178N | C7, C8, C9 |
| 3 | 270nH | sparkfun-electromech:L_Axial_L14.6-hand | L7, L8, L9 |
| 2 | 62nH | sparkfun-electromech:L_Axial_L14.6-hand | L2, L3 |
| 2 | Conn_Coaxial_UHF | sparkfun-electromech:UHF-slant-corr | J1, J3 |
| 1 | 100nH | sparkfun-electromech:L_Axial_L14.6-hand | L5 |
| 1 | 13pF | sparkfun-electromech:CAPC2927X178N | C1 |
| 1 | 160nH | sparkfun-electromech:L_Axial_L14.6-hand | L10 |
| 1 | 16pF | sparkfun-electromech:CAPC2927X178N | C16 |
| 1 | 20pF | sparkfun-electromech:CAPC2927X178N | C5 |
| 1 | 220nH | sparkfun-electromech:L_Axial_L14.6-hand | L6 |
| 1 | 22pF | sparkfun-electromech:CAPC2927X178N | C20 |
| 1 | 30pF | sparkfun-electromech:CAPC2927X178N | C11 |
| 1 | 39pF | sparkfun-electromech:CAPC2927X178N | C10 |
| 1 | 56nH | sparkfun-electromech:L_Axial_L14.6-hand | L4 |
| 1 | 75nH | sparkfun-electromech:L_Axial_L14.6-hand | L1 |
| 1 | 75pF | sparkfun-electromech:CAPC2927X178N | C6 |
| 1 | Conn_Coaxial_N | sparkfun-electromech:Conn-N-slant-C | J2 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040

windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器


lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script

It measures 157.1 × 101 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the VJ1111D100JXRAJ, VJ1111D200JXRAJ, VJ1111D220JXRAJ and VJ1111D390JXRAJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Supermagnum/diplexer repository on GitHub, at the commit this page was made from: the board is diplexer.kicad_pcb and its schematic diplexer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Supermagnum before reusing the design.