
Alarm IO Board
super-cow-powers/better-lamp-controller
A custom lamp controller with audio, controlled with an RP2040

A custom lamp controller with audio, controlled with an RP2040
Better lamp controller is an open-source printed circuit board by super-cow-powers, from the super-cow-powers/better-lamp-controller repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 90 × 60 mm with 103 parts on 129 nets, routed with 1,447 tracks and 470 vias.
It is built around the RP2040, LMR33620BDDA and W25Q16JVSSIQ, with the 74LVC1G08Z, 74LVC2G66DP and MAX6106EUR among its other parts. Its parts include 46 capacitors, 25 resistors, 12 ICs, 8 connectors and 1 inductor. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 0u1 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C10, C12, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C29 +14 |
| 10 | 43R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R6, R7, R8, R13, R14, R15 |
| 6 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C5, C31, C36, C46 |
| 5 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R16, R20, R22 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 1k3 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R27, R28 |
| 3 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C8, C35 |
| 3 | 22u | Capacitor_SMD:C_1210_3225Metric | C14, C33, C34 |
| 3 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R17 |
| 2 | 18p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C27, C28 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R26 |
| 2 | 74LVC1G08 | Package_TO_SOT_SMD:SOT-23-5 | U6, U8 |
| 1 | 100u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C13 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 10u | Capacitor_SMD:C_1210_3225Metric | C7 |
| 1 | 43k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 74LVC2G66 | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U2 |
| 1 | CR2032 Lithium Primary | Battery:BatteryHolder_Keystone_3000_1x12mm | BT1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | Conn_02x10_Odd_Even | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J4 |
| 1 | Conn_02x20_Odd_Even | Connector_IDC:IDC-Header_2x20_P2.54mm_Vertical | J1 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J9 |
| 1 | HC-TYPE-C-16P-01A | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J3 |
| 1 | LMR33620BDDA | Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm_ThermalVias | U9 |
| 1 | LP5860T | kicad global library:QFN-40_EP_5x5_Pitch0.4mm_Hand_Solder | U1 |
| 1 | MAX6106 | Package_TO_SOT_SMD:SOT-23 | U11 |
| 1 | MAX98360A | kicad global library:Maxim_FC2QFN-10_Hand_Solder | U4 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J2 |
| 1 | OPT4048 | kicad global library:SOT-583_DTS | U12 |
| 1 | PCF2131 | kicad global library:HLSON16_SOT1992-1 | U10 |
| 1 | RH100-12.000-18-2030-TR | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | RP2040 | kicad global library:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm_ThermalVias_Hand_Solder | U3 |
| 1 | TLV7012 | Package_TO_SOT_SMD:TSOT-23-8 | U7 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.275x5.275mm_P1.27mm | U5 |
| 1 | XGL4030-472 4u7, .035R, 2.1A Isat | Inductor_SMD:L_Coilcraft_XxL4030 | L1 |

super-cow-powers/better-lamp-controller
A custom lamp controller with audio, controlled with an RP2040



openpoenode/breakoutboard
Development board exposing all module features


NessieCircuits/Riotee_ProbeHardware
The Riotee probe lets you program a Riotee module that is soldered onto your PCB or plugged into a breadboard. It has a standard 10-pin 0.1" connector compatible with the popular Tag-Connect cables that allow in-circuit…


rasusmilch/PT100_Mesh_Datalogger
This application turns an ESP32-S3 N8R2 into a UTC-centric PT100 data logger with FRAM-first buffering, SD-card CSV batching/verification, DS3231 RTC support, mesh streaming, and serial-console calibration.

NessieCircuits/Riotee_Board
The Riotee board is a development board for battery-free wireless devices. The on-board wireless microcontroller runs off energy harvested from, for example, a solar panel and uses only tiny capacitors as energy…
It measures 90 × 60 mm and has 4 copper layers, 1.65 mm thick.
103 parts, built around the RP2040, LMR33620BDDA, W25Q16JVSSIQ and 74LVC1G08Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the super-cow-powers/better-lamp-controller repository on GitHub, at the commit this page was made from: the board is better-lamp-controller.kicad_pcb and its schematic Alarm IO Board/Alarm IO Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).