

Telemetry
PCB development repository
- Size
- 72 × 74 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 80
- Pads
- 126
- Tracks, vias
- 116, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Mar 2022
- Updated
- 7 Nov 2026
Overview
Telemetry is an open-source printed circuit board by sundevilmotorsports, from the sundevilmotorsports/pcb-dev repository on GitHub. It is a 2-layer board of 72 × 74 mm with 21 parts on 80 nets, routed with 116 tracks and 4 vias.
It is built around the SN65HVD230D and TEENSY 4.1. Its parts include 4 resistors, 3 ICs, 3 diodes, 2 capacitors and 2 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
2SN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversTEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorised
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 500 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | Bus Termination | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | CAN | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1 |
| 1 | CAN_DaisyChain | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J2 |
| 1 | ESDCAN | Package_TO_SOT_SMD:SOT-323_SC-70 | D1 |
| 1 | GREEN | LED_SMD:LED_1206_3216Metric | D3 |
| 1 | LOGO | LOGO | G*** |
| 1 | RED | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Teensy4.1 | Teensy:Teensy41 | U1 |
| 1 | ~ | Library:nrf24L01-click | U3 |
The 20 most common of 21 parts.
More from sundevilmotorsports/pcb-dev
12- 4 layers182.9 × 134 mm

- 4 layers75 × 87 mm

- 4 layers75 × 88 mm

- 4 layers80 × 39 mm

- 4 layers101 × 75 mm

- 4 layers162.2 × 126.4 mm

- 4 layers162.2 × 126.4 mm
/steering%20wheel%20v4.kicad_pcb.jpg?size=s&soon)
- 4 layers130 × 81 mm

- 4 layers101 × 60 mm

- 4 layers37 × 22 mm

- 4 layers182.9 × 134 mm

- 4 layers93.6 × 21 mm

Similar boards
- 2 layers140.3 × 89.3 mm

- 4 layers114.3 × 134.5 mm

Exoskeleton
Bihyungbetter/exoskeleton
Exoskeleton is a powered lower-limb exoskeleton with six actuated joints — hip flexion, hip abduction, and knee flexion per leg.
60 parts - 2 layers81.4 × 64.3 mm

- 2 layers118.1 × 101.6 mm

Teensy eurorack
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels
102 parts259MIT - 2 layers240 × 240 mm

- 2 layers304.8 × 170.8 mm

- 2 layers66.5 × 36.5 mm

- 2 layers312 × 140 mm

Questions
How big is the Telemetry PCB?
It measures 72 × 74 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Telemetry use?
21 parts, built around the SN65HVD230D and TEENSY 4.1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Telemetry KiCad files?
From the sundevilmotorsports/pcb-dev repository on GitHub, at the commit this page was made from: the board is PRE2026/telemetry/telemetry.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Telemetry design in my own project?
Its repository states no licence, so its author keeps all rights: ask sundevilmotorsports before reusing the design.