

PCB development repository
- Size
- 130 × 81 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 106
- Nets
- 228
- Pads
- 623
- Tracks, vias
- 1,423, 344
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Mar 2022
- Updated
- 7 Nov 2026
Overview
Dash is an open-source printed circuit board by sundevilmotorsports, from the sundevilmotorsports/pcb-dev repository on GitHub. It is a 4-layer board of 130 × 81 mm with 106 parts on 228 nets, routed with 1,423 tracks and 344 vias.
It is built around the BT818Q-T, ESP32-S3-WROOM-1-N8R8 and SN65HVD230D, with the TLC5955RTQT, S25FL256LAGNFB010 and EMIF06-MSD02N16 among its other parts. Its parts include 36 diodes, 24 capacitors, 21 resistors, 12 ICs and 4 connectors. It belongs with the ESP32 boards of this library.
Main components
12BT818Q-T
VQFN-64(9x9)-40℃~+85℃ 3V~3.6V 4 FLASH VQFN-64(9x9) Microcontrollers (MCU/MPU/SOC) ROHSBridgetekMicrocontrollers (MCU/MPU/SOC)ESP32-S3-WROOM-1-N8R8
SMD,25.5x18mm-104.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3R8 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesSN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversTLC5955RTQT
VFQFN-56-EP(8x8)-40℃~+85℃ 25MHz~33MHz 34.7mA 3V~5.5V 48 5% Built-in PWM VFQFN-56-EP(8x8) LED Drivers ROHSTexas InstrumentsLED DriversS25FL256LAGNFB010
WSON-8-EP(6x8)-40℃~+85℃ 100,000 cycles 133MHz 2.7V~3.6V 20 Years 20uA 256Mbit 270ms@(64KB) SPI WDFN-8-EP NOR FLASH ROHSInfineon TechnologiesNOR FLASHEMIF06-MSD02N16
QFN-16L-40℃~+85℃ 20pF 45Ω Yes QFN-16L EMI/RFI Filters (LC, RC Networks) ROHSSTMicroelectronicsEMI/RFI Filters (LC, RC Networks)MIC37100-3.3WS
SOT-223-40℃~+125℃@(Tj) 1 11mA 1A 3.3V 500mV@(1A) 6V Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)CLMUD-FKC-CHJNPM569ABB845343
PLCC-4-40℃~+85℃ B:2.7V、G:2.6V、R:1.9V B:460nm~470nm、R:619nm~624nm、G:525nm~532.5nm Common Anode R:25mA、G:13mA、B:13mA R:355mcd、G:635mcd、B:101mcd PLCC-4 RGB LEDs ROHSCree LEDRGB LEDsKSS321GLFS
SMD,7x4.4mm-40℃~+85℃ 2N 3.1mm 5.5mm 50V 50mA Gull Wing IP40 No Rectangular Button SPST-NO Surface Mount,Vertical Without Bracket SMD,7x4.4mm Tactile Switches ROHSC&KTactile SwitchesMBR0540T1G
SOD-123SOD-123 Schottky Diodes ROHSGOODWORKSchottky Diodes150060RS75000
0603-40℃~+85℃ 140° 20mA 250mcd 2V 625nm 630nm Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | CLMUD-FKC-CHJNPM569ABB845343 | SDM:PLCC4_CLMUD-FKC_CRW | LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23, LED24, LED25, LED26 +8 |
| 11 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R5, R10, R11, R15, R31, R54, R57, R58, R59, R60 |
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C10, C11, C13, C15, C16, C17, C18, C22 |
| 8 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C4, C8, C9, C19, C20, C21, C27 |
| 8 | CLMUD-FKC-CHJNPM569ABB845343 | SDM_MiscFootprint:PLCC4_CLMUD-FKC_CRW | LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED10 |
| 4 | KSS321G_LFS | SDM:KSS321GLFS | S1, S2, S3, S4 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C12, C14 |
| 3 | 22uF | Capacitor_SMD:C_0603_1608Metric | C23, C24, C26 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R16 |
| 2 | MBR0540T1G | SDM_MiscFootprint:SOD3716X135N | D2, D4 |
| 2 | TLC5955RTQT | SDM:QFN50P800X800X100-57N-D | IC6, IC7 |
| 1 | 11k | Resistor_SMD:R_0603_1608Metric | R56 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 150060RS75000 | SDM:LEDC1608X80N | LED1 |
| 1 | 19428-0011 | SDM:194280011 | J3 |
| 1 | 4.7uH | SDM_MiscFootprint:BWVS006060454R7ML1 | L1 |
| 1 | 4.7uH | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L2 |
| 1 | 47K | Resistor_SMD:R_0603_1608Metric | R51 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.9 | C25 |
| 1 | 5.05 | Resistor_SMD:R_0603_1608Metric | R34 |
| 1 | 5006 | SDM:5006 | BLACK_TP1 |
| 1 | 68 | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 82k | Resistor_SMD:R_0603_1608Metric | R55 |
| 1 | BT818Q-T | SDM_MiscFootprint:QFN50P900X900X90-65N-D | IC8 |
| 1 | Conn_01x40_Pin | Connector_FFC-FPC:Omron_XF2M-4015-1A_1x40-1MP_P0.5mm_Horizontal | J2 |
| 1 | EMIF06-MSD02N16 | SDM:UQFN-17-3.5x1.2mm | U10 |
| 1 | ESDCAN03-2BWY | SDM_MiscFootprint:SOT65P210X110-3N | D1 |
| 1 | ESP32-S3-WROOM-1-N8R8 | SDM_MiscFootprint:ESP32S3WROOM1N8R8 | IC1 |
| 1 | MIC37100-3.3WS | SDM_MiscFootprint:SOT230P700X180-4N | IC5 |
| 1 | Molex_1040310811 | Connector_Card:microSD_HC_Molex_104031-0811 | J4 |
| 1 | S25FL256LAGNFB010 | SDM_MiscFootprint:SON127P600X500X80-9N-D | IC9 |
| 1 | SMPS | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TLP175A_TPL,E | SDM:TLP266J | IC3 |
| 1 | TPS2116DRLR | SDM:SOTFL50P160X60-8L | IC4 |
| 1 | TPS563211DRLR | SDM_MiscFootprint:SOTFL50P160X60-8N | IC10 |
| 1 | TPS61169DCKR | SDM:SOT65P210X110-5N | PS1 |
| 1 | USB4730-GF-A | SDM:USB4730GFA | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
More from sundevilmotorsports/pcb-dev
12- 4 layers182.9 × 134 mm

- 4 layers75 × 87 mm

- 4 layers75 × 88 mm

- 4 layers80 × 39 mm

- 4 layers101 × 75 mm

- 4 layers162.2 × 126.4 mm

- 4 layers162.2 × 126.4 mm
/steering%20wheel%20v4.kicad_pcb.jpg?size=s&soon)
- 4 layers101 × 60 mm

- 4 layers37 × 22 mm

- 4 layers182.9 × 134 mm

- 4 layers93.6 × 21 mm

- 4 layers37 × 22 mm

Similar boards
- 4 layers68 × 83.4 mm

- 2 layers55 × 31 mm

- 2 layers75.7 × 53.7 mm

- 2 layers24 × 8.7 mm

USB Baseboard
timohueser/OpenBikeComputer
Open source Bikecomputer with a focus on exploration and adventure.
5 parts11GPL-3.0 - 4 layers76.9 × 67.3 mm

- 4 layers408.7 × 50 mm

Partial Drawer Controller v1
Robast-GmbH/PCB_Designs
This repository contains all the necessary files and instructions for the PCBs that are designed using KiCad. Here is an overview of the main components: - .github: Contains Github-specific configurations, including…
619 parts1MIT - 2 layers85.2 × 107.8 mm

- 2 layers99.1 × 108.6 mm

PROJ500 - Power Distribution Board
AislingBee/MEng-PROJ500-2025-26
The Github Repository for MEng project 2025/26
317 parts
Questions
How big is the Dash PCB?
It measures 130 × 81 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Dash use?
106 parts, built around the BT818Q-T, ESP32-S3-WROOM-1-N8R8, SN65HVD230D and TLC5955RTQT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dash KiCad files?
From the sundevilmotorsports/pcb-dev repository on GitHub, at the commit this page was made from: the board is 2026/Dash/Dash.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dash design in my own project?
Its repository states no licence, so its author keeps all rights: ask sundevilmotorsports before reusing the design.