4 layers132.5 × 82 mm
Wandfernsprecher
hanebefl/wandfernsprecher-hw
GSM conversion for a old German Wandfernsprecher telephone
93 parts6
2 layers132 × 78.5 mm
Fetap
sui77/fetap-mobile6Turn your old rotary dial phone into a cell phone.
- Size
- 132 × 78.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 42
- Pads
- 94
- Tracks, vias
- 27, 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Mar 2017
- Updated
- 14 Feb 2022
Overview
Fetap is an open-source printed circuit board by sui77, from the sui77/fetap-mobile repository on GitHub. It is a 2-layer board of 132 × 78.5 mm with 12 parts on 42 nets, routed with 27 tracks and 3 vias.
It is built around the SIM800L and L293D. Its parts include 2 ICs, 1 connector and 1 switch.
Main components
2
SIM800L
SMD,17.8x15.8mm-40℃~+85℃ 3.4V~4.4V 850MHz、900MHz、1800MHz、1900MHz GPIO、ADC、PCM、SIM card GPRS、GSM PCM voice function、DTMF function、CMUX function、USSD function SMD,17.8x15.8mm 2G/3G/4G/5G Modules ROHSSIMCom Wireless Solutions2G/3G/4G/5G Modules
L293D
DIP-16-40℃~+150℃ 1.2A 2 4.5V~36V 4mA 600mA DIP-16 Brushed DC Motor Drivers ROHSSTMicroelectronicsStepper Motor Driver
README
README.mdfetap-mobile
Turn your old Fernsprechtischapparat FeTAp 611 (or any other rotary dial phone) into a mobile phone.
Bom
- FeTAp 611 rotary dial phone
- Arduino Pro Mini
- sim800l GSM module
- TP4056 lithium battery charger module with protection
- 18560 type lithium battery
- 3V-35V step up boost converter
- L293D H-Bridge
Software
- Rotary-Dial library
- Arduino sketch from this repository
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Arduino_Pro | Module:Arduino_Nano | A1 |
| 1 | Battery | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | Battery1 |
| 1 | Bell | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Dial | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | Dial1 |
| 1 | L293D | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | VIN | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | Power1 |
| 1 | charger | suat:charger | Charger1 |
| 1 | hoerer | suat:suat | U3 |
| 1 | hook switch | suat:cradleswitch | Hook1 |
| 1 | sim800l | suat:sim800l | sim800l1 |
| 1 | stepup | suat:stepup | StepUpModule1 |
Similar boards
- 2 layers88.9 × 50.8 mm
- 2 layers51.9 × 114.3 mm
- 2 layers
- 2 layers131.3 × 73 mm
Single layer modules
manupawickramasinghe/stm32-solar-gsm-sensor
Firmware and Hardware for Open-Source GSM Baased STM32 AgriSensor
48 partsMIT - 2 layers152 × 122 mm
- 2 layers76 × 92.5 mm
Pcb gateway
mirra-org/mirra
Firmware, web app/server and documentation for the MIRRA project.
86 partsApache-2.0 - 2 layers
EV Guardian Carrier
nandan63625/EV-Fleet-Management-System
IoT-based EV Fleet Management System for real-time vehicle monitoring and tracking.
23 parts
Questions
How big is the Fetap PCB?
It measures 132 × 78.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fetap use?
12 parts, built around the SIM800L and L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fetap KiCad files?
From the sui77/fetap-mobile repository on GitHub, at the commit this page was made from: the board is pcb/fetap.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fetap design in my own project?
Its repository states no licence, so its author keeps all rights: ask sui77 before reusing the design.