
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

Just an experimental PCB design (this is my first one)
555LEDBlinker is an open-source printed circuit board by sudu7878, from the sudu7878/555LEDBlinker repository on GitHub. It is a 2-layer board of 30.5 × 33 mm with 8 parts on 7 nets, routed with 87 tracks and 4 vias.
It is built around the NE555P. Its parts include 3 resistors, 2 capacitors, 1 IC, 1 diode and 1 connector.
Just an experimental PCB design (this is my first one) Have a look!

| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 10nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 5V DC | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 30.5 × 33 mm and has 2 copper layers, 1.6 mm thick.
8 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sudu7878/555LEDBlinker repository on GitHub, at the commit this page was made from: the board is src/src.kicad_pcb and its schematic src/src.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sudu7878 before reusing the design.