

Solder binary
The schematic has an unpopulated section of an additional layer. Since the solder kit doesn't have this many transistors and I lacked PCB space, I decided to use hex inverter ICs (which I can get for cheap) for the same…
- Size
- 90 × 82 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 72
- Pads
- 178
- Tracks, vias
- 282, 20
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.99 (file 20241129)
- Created
- 2 Jul 2025
- Updated
- 11 Oct 2025
Overview
Solder binary is an open-source printed circuit board by strawberry-p, from the strawberry-p/solder-PCB repository on GitHub. It is a 2-layer board of 90 × 82 mm with 49 parts on 72 nets, routed with 282 tracks and 20 vias.
Its parts include 18 resistors, 11 transistors, 6 connectors, 4 diodes and 3 switches.
README
README.mdFunction
This is a PCB that converts a binary number input into a single logic high line on the output. It can be used to drive a stepper motor with less MCU pins.
Images
Schematic
The schematic has an unpopulated section of an additional layer. Since the solder kit doesn't have this many transistors and I lacked PCB space, I decided to use hex inverter ICs (which I can get for cheap) for the same inverter->inverter function.
I decided to make my own symbol for the IC (according to the datasheets) so that I don't mess up the wiring:

PCB

The PCB has a lot of broken out pins for the single-line output. It also has LEDs for easier testing, and footprints for the ICs I will buy myself.
3D render

Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 47K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R13, R14, R29, R30, R35 |
| 5 | 4.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R9, R12, R15, R16 |
| 5 | ~ | Package_SO:SO-14_3.9x8.65mm_P1.27mm | Q15, Q16, Q17, Q18, Q19 |
| 4 | 51Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R33, R34, R36 |
| 4 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 3 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q2, Q4, Q6 |
| 3 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q3, Q5 |
| 3 | 90Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R11 |
| 3 | SW_Push_45deg | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 2 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J3, J4 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | Energy | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers173 × 122.5 mm

- 2 layers85.1 × 49.8 mm

- 2 layers50 × 90 mm

- 2 layers126.4 × 15.2 mm

- 2 layers43 × 92.3 mm

DSKY driver
benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
49 parts261MIT - 2 layers58 × 110 mm

- 2 layers61 × 42.5 mm

- 2 layers31 × 38 mm

Questions
How big is the Solder binary PCB?
It measures 90 × 82 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Solder binary use?
49 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solder binary KiCad files?
From the strawberry-p/solder-PCB repository on GitHub, at the commit this page was made from: the board is src/solder-binary.kicad_pcb and its schematic src/solder-binary.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solder binary design in my own project?
Its repository states no licence, so its author keeps all rights: ask strawberry-p before reusing the design.