Skip to the content
2 layersLed watch, the printed circuit board in 3D

attempting a 2-layer pcb watch. battery will sit on another pcb underneath, with connections to the top pcb board.

Copper layers
2
Thickness
1.6 mm
Parts
87
Nets
30
Pads
214
Tracks, vias
661, 80
Routed
Yes
KiCad
KiCad 4
Created
11 May 2018
Updated
18 May 2018

Overview

Led watch is an open-source printed circuit board by straightupdeliciousfunk, from the straightupdeliciousfunk/2layer_led_watch repository on GitHub. It is a 2-layer board with 87 parts on 30 nets, routed with 661 tracks and 80 vias.

It is built around the ATMEGA328P-AU and MCP7940N-I/P. Its parts include 60 diodes, 12 resistors, 7 capacitors, 3 connectors and 2 ICs. It belongs with the wearables boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

Parts

87
QtyValueFootprintReferences
60LEDLEDs:LED_0603_HandSolderingD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +44
12RResistors_SMD:R_0603_HandSolderingR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12
4C-trimCapacitors_SMD:C_0603_HandSolderingC3, C4, C6, C7
3Conn_01x02Pin_Headers:Pin_Header_Straight_1x02_Pitch1.00mmJ1, J2, J3
2100nFCapacitors_SMD:C_0603_HandSolderingC1, C2
116MHzCrystals:Crystal_SMD_2012-2pin_2.0x1.2mm_HandSolderingY1
132.768kHzCrystals:Crystal_SMD_2012-2pin_2.0x1.2mm_HandSolderingY2
1ATMEGA328P-AUHousings_QFP:TQFP-32_7x7mm_Pitch0.8mmU1
1C-decoupCapacitors_SMD:C_0603_HandSolderingC5
1MCP7940NHousings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mmU2
1SW_PushButtons_Switches_SMD:SW_SPST_B3U-1000PSW1

Similar boards

  • 2 layers113 × 48 mmOmega3mod zoned, the printed circuit board in 3D

    Omega3mod zoned

    gerbaud-design/KiCAD-gerbaud-design

    all the KiCAD files for gerbaud design products and libraries

    120 parts
  • 2 layers100 × 71.8 mmBrutzelkarte, the printed circuit board in 3D

    Brutzelkarte

    jago85/Brutzelkarte_PCB

    Brutzelkarte - N64 Flash Cart PCB (KiCad)

    106 parts67GPL-3.0
  • 2 layers127 × 114.3 mmNes, the printed circuit board in 3D

    Nes

    dkonigsberg/nestronic

    Nestronic Game Music Synthesizer Alarm Clock

    144 parts38
  • 2 layersRtc, the printed circuit board in 3D

    Rtc

    feichtinger/LEGACY-fingerprint-doorlock

    A simple firmware and GUI for an electronic doorlock using a fingerprint sensor.

    8 parts5GPL-3.0
  • 2 layers220 × 70 mmDigital clock, the printed circuit board in 3D

    Digital clock

    deqnaleksandrov-dot/RGB_LED_Clock

    Digital RGB LED Clock with engraved acrylic display showing the time and day of the week. Based on Atmega328, addressable LEDs and real time clock (RTC).

    111 parts1
  • 4 layers324.3 × 185.6 mmGriffin, the printed circuit board in 3D

    Griffin

    bradgrantham/griffin

    An M68000 homebrew SBC. See the design notes.

    305 partsApache-2.0
  • 2 layers87 × 66 mmES PUNKU2-0100, the printed circuit board in 3D

    ES PUNKU2-0100

    cese-dci/tp-dci--evolentini

    tp-dci--evolentini created by GitHub Classroom

    80 parts
  • 2 layers100 × 50 mmBus beaglebone, the printed circuit board in 3D

    Bus beaglebone

    makerbus/bus_beaglebone

    Beagle Bone Black with a Bus Connector

    49 parts

Questions

What parts does the Led watch use?

87 parts, built around the ATMEGA328P-AU and MCP7940N-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Led watch KiCad files?

From the straightupdeliciousfunk/2layer_led_watch repository on GitHub, at the commit this page was made from: the board is led_watch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Led watch design in my own project?

Its repository states no licence, so its author keeps all rights: ask straightupdeliciousfunk before reusing the design.