Skip to the content
4 layers45 × 60 mmBlock JAN6418, the printed circuit board in 3D

A simple yet flexible gain stage based on the JAN6418 subminiature pentode.

Size
45 × 60 mm
Copper layers
4
Thickness
1.6 mm
Parts
21
Nets
11
Pads
36
Tracks, vias
27, 84
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Oct 2024
Updated
7 Mar 2025

Overview

Block JAN6418 is an open-source printed circuit board by storskegg, from the storskegg/Block-JAN6418 repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 45 × 60 mm with 21 parts on 11 nets, routed with 27 tracks and 84 vias.

Its parts include 8 resistors, 5 connectors, 3 capacitors and 1 IC.

README

README.md

Block-JAN6418

A simple yet flexible gain stage based on the JAN6418 subminiature pentode.

Features

  • Filament supply options:
    • 2x resistor voltage drop
    • Optional bypass capacitor
  • Pentode/Triode mode:
    • Triode: Jumper (0 Ohm resistor) S2 to the plate
    • Pentode: Solder a resistor between S2 and B+, and S2 and ground
    • Pentode: Solder leads to an off-board potentiometer in lieu of the two resistors
  • Impedance controlled PCB stack-up:
    • Top, Inner-2, and Bottom copper fill ground planes
    • Signal lines on Inner-1 layer
    • Power lines on Bottom Layer
    • Vias along signal path for improved impedance control
  • Mounting holes on either side of the tube for securing using rubber or silicone grommets, and a pair of 2.54mm (0.1in) zipties.

Background

I've been designing a blues harp preamp for a buddy of mine, and it occurred to me that all valve gain blocks are essentially the same, just with some variance in component values. Because I tend to have different ideas for an individual gain block, and different ideas about interstage connections (capacitor types, tone stack, delay/echo, etc), having this board allows me to play with different ideas more easily than pulling up components from the breadboard, but at the cost of components soldered into place.

Parts

21
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
2CCapacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mmC1, C2
1100nFCapacitor_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02C3
11MResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1
19VTerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360271_1x01_Horizontal_ScrewM3.0_BoxedJ1
1B+TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360271_1x01_Horizontal_ScrewM3.0_BoxedJ4
1JAN6418Valve:Valve_Mini_Pentode_LinearU1
1RResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR2
1R_FilAResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR6
1R_FilBResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR7
1R_Pent_B+Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR8
1R_Pent_gndResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR5
1R_Tri_JmprResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR4
1RaResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR3
1Sig_gndTerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360271_1x01_Horizontal_ScrewM3.0_BoxedJ2
1Sig_inTerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360271_1x01_Horizontal_ScrewM3.0_BoxedJ3
1Sig_outTerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360271_1x01_Horizontal_ScrewM3.0_BoxedJ5

Similar boards

  • 4 layers26.7 × 21.9 mmBuck Converter, the printed circuit board in 3D

    Buck Converter

    murexrobotics/electrical

    Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

    21 parts192MIT
  • 4 layers26 × 30 mmDay 01 Wi Fi Halow, the printed circuit board in 3D

    Day 01 Wi Fi Halow

    i2cjak/Framework_Expansion_Cards

    In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop

    21 parts95CERN-OHL-P-2.0
  • 4 layers20 × 48.5 mmMidea WiFi Dongle, the printed circuit board in 3D

    Midea WiFi Dongle

    reneklootwijk/mideahvac-dongle

    This repository contains the hardware design of a WiFi dongle for Midea-like airconditioners and humidifiers. Midea provides a WiFi dongle (SK102/SK103), either as optional feature or built-in, to control the appliances…

    21 parts75
  • 4 layers80 × 80 mmZoxnoxiouscard, the printed circuit board in 3D

    Zoxnoxiouscard

    brer-rabbit/zoxnoxious

    Analog synth / software interface

    21 parts68GPL-3.0
  • 4 layers90 × 75 mmCM4 2 Backup, the printed circuit board in 3D

    CM4 2 Backup

    olvint/CM4-NAS-MiniPCIE

    Raspberry Pi CM4 based NAS solution board

    21 parts51
  • 4 layersTiav3, the printed circuit board in 3D

    Tiav3

    OpenSiPM/sipm-bias-control

    Single channel silicon photomultipliers for high-speed fluorescence imaging

    21 parts44
  • 4 layers88.9 × 20.3 mmGW4194-SOJ DC, the printed circuit board in 3D

    GW4194-SOJ DC

    garrettsworkshop/RAMSIMM-30

    4 MB and 16 MB 30-pin DRAM SIMMs

    21 parts34

Questions

How big is the Block JAN6418 PCB?

It measures 45 × 60 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Block JAN6418 use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Block JAN6418 KiCad files?

From the storskegg/Block-JAN6418 repository on GitHub, at the commit this page was made from: the board is Block-JAN6418.kicad_pcb and its schematic Block-JAN6418.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Block JAN6418 design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).