

Prgstl
STM32World Development Modules
- Size
- 76.2 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 121
- Pads
- 253
- Tracks, vias
- 302, 68
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Jul 2021
- Updated
- 30 Oct 2025
Overview
Prgstl is an open-source printed circuit board by STM32World, from the STM32World/hardware repository on GitHub. It is a 2-layer board of 76.2 × 50.8 mm with 51 parts on 121 nets, routed with 302 tracks and 68 vias.
It is built around the AMS1117-3.3V, SRV05-4 and S9013. Its parts include 18 resistors, 10 capacitors, 4 diodes, 4 connectors and 3 ICs. It belongs with the STM32 boards of this library.
Main components
3AMS1117-3.3V
SOT-223-20℃~+85℃ 1 1.2A 1.5V@(800mA) 15V 3.3V 5mA Fixed Positive Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)S9013
SOT-23-55℃~+150℃ 1 NPN 100nA 120 150MHz 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
README
README.mdstm32world
Documentation is in our wiki: https://stm32world.com/wiki/STM32World
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | ~ | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2, JP3, JP4, JP6, JP7, JP8, JP9, JP10 |
| 5 | C_100NF_0603 | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C7, C8 |
| 3 | R_220_0603 | Resistor_SMD:R_0603_1608Metric | R3, R5, R6 |
| 2 | C_10UF_0805 | Capacitor_SMD:C_0805_2012Metric | C1, C6 |
| 2 | C_20PF_0603 | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | R_100K_0603 | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | R_100_0603 | Resistor_SMD:R_0603_1608Metric | R11, R16 |
| 2 | R_10K_0603 | Resistor_SMD:R_0603_1608Metric | R7, R14 |
| 2 | R_22_0603 | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | R_4.7K_0603 | Resistor_SMD:R_0603_1608Metric | R17, R18 |
| 2 | R_5.1K_0603 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | ~ | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP1, JP5 |
| 1 | AMS1117-3.3`` | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | C_1UF_0603 | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | LED_BLUE_0603 | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LED_GREEN_0603 | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LED_RED_0603 | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | R_1.5K_0603 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | R_33K_0603 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | S9013 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | STM32WORLD_BOARD | stm32world:STM32WORLD_BOARD | J4 |
| 1 | STM32WORLD_CONNECTOR_1 | stm32world:PinSocket_2x20_P2.54mm_Vertical_Stackable | J2 |
| 1 | STM32WORLD_CONNECTOR_2 | stm32world:PinSocket_2x20_P2.54mm_Vertical_Stackable | J3 |
| 1 | X_8MHZ | stm32world:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | ~ | stm32world:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | ~ | Diode_SMD:D_SOD-123 | D1 |
More from STM32World/hardware
12- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 4 layers69 × 43.5 mm

- 4 layers70 × 51.5 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

Similar boards
- 4 layers80 × 60 mm

Kcell faker
karlp/kcell-faker
fake a load cell, for testing functional behaviour with changing loads.
75 parts - 4 layers31 × 15 mm

- 2 layers54 × 85.6 mm

Board43
smartbank-inc/Board43
Board43 is an RP2350A-based microcontroller development board. Flash PicoRuby or your favorite firmware and start hacking.
583 parts30 - 2 layers69.9 × 38.1 mm

MicPreampTest
open-headset-interconnect-standard/ohis
An open standard for a common interconnect between headsets and radios.
14 parts28 - 2 layers41.6 × 20 mm

WebastoWBUSInterface
stuartpittaway/WebastoWBUSInterface
Hardware circuit diagram for interfacing to the Webasto WBUS interface from a PC/Arduino
16 parts25GPL-3.0 - 2 layers187.3 × 109.5 mm

Z80RP2350b
kysilv/z80-rp2350b-zx-compatible
Retrocomputer compatible with ZX Spectrum based on real Z80 + discrete RAM/ROM + rp2350b as ULA
131 parts9GPL-3.0 - 2 layers100 × 97.5 mm

MC5000 Board
RickP/MC5000_DevKit
An hardware puzzle that teaches the basics of programming.
131 parts6GPL-3.0 - 2 layers60.4 × 112.5 mm

Questions
How big is the Prgstl PCB?
It measures 76.2 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Prgstl use?
51 parts, built around the AMS1117-3.3V, SRV05-4 and S9013. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Prgstl KiCad files?
From the STM32World/hardware repository on GitHub, at the commit this page was made from: the board is prgstl/prgstl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Prgstl design in my own project?
Its repository states no licence, so its author keeps all rights: ask STM32World before reusing the design.