2 layers110 × 99.6 mm
PCIce
ZoidTechnology/PCIce
A PCI Express card with an inbuilt PWM fan controller and mounting points for an 80mm fan.
22 parts90GPL-3.0
2 layers25.9 × 20.6 mm
TinyBreakout
SteveMayze/tinyBreakout1A small project to create a SMD ATTiny13 Breakout board
- Size
- 25.9 × 20.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 16
- Pads
- 49
- Tracks, vias
- 89, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Oct 2015
- Updated
- 8 Jan 2016
Overview
TinyBreakout is an open-source printed circuit board by SteveMayze, from the SteveMayze/tinyBreakout repository on GitHub. It is a 2-layer board of 25.9 × 20.6 mm with 16 parts on 16 nets, routed with 89 tracks and 10 vias.
It is built around the ATTINY13A-SU and LD2979M30. Its parts include 6 resistors, 4 connectors, 3 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY13A-SU
SOIC-8-208mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LD2979M30
SOT-23-5L-25℃~+125℃@(Tj) 1 160uV 16V 200mV@(50mA) 3V 500uA 50mA 63dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1kΩ | Resistors_SMD:R_0805 | R2, R3, R4, R5 |
| 3 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P2, P3, P4 |
| 2 | 1μF | Capacitors_SMD:C_0805 | C1, C2 |
| 1 | 0Ω | Resistors_SMD:R_0805 | R6 |
| 1 | 100nF | Capacitors_SMD:C_0805 | C3 |
| 1 | 10KΩ | Resistors_SMD:R_0805 | R7 |
| 1 | ATTINY13A-S | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | IC1 |
| 1 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_2x03 | P1 |
| 1 | LD2979 | tinyBreakout:SOT-23-5L | U1 |
The 15 most common of 16 parts.
Questions
How big is the TinyBreakout PCB?
It measures 25.9 × 20.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TinyBreakout use?
16 parts, built around the ATTINY13A-SU and LD2979M30. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TinyBreakout KiCad files?
From the SteveMayze/tinyBreakout repository on GitHub, at the commit this page was made from: the board is PCB/tinyBreakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TinyBreakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask SteveMayze before reusing the design.
Similar boards
- 2 layers180.1 × 180.3 mm
- 2 layers100.6 × 74.9 mm
Nes discrete mapper 1-1
MouseBiteLabs/NES-Cartridges
A collection of Nintendo Entertainment System (NES) cartridge circuit boards
55 parts25CC-BY-SA-4.0 - 2 layers51 × 43 mm
Egg timer
MakersFunDuck/Common-Kitchen-Timer-With-LCD-Replacement-Board
A replacement PCB board for common 4 digit 7 segment LCD kitchen timers.
25 parts13GPL-3.0 - 2 layers10.2 × 27.7 mm
Xbox tray emulator
AR1972/Xbox_tray_emulator
Original Xbox DVD tray emulation via ATtiny MCU
6 parts6WTFPL - 2 layers26.2 × 29.7 mm
- 2 layers70 × 50.1 mm
- 2 layers40 × 25 mm
