

Pmod sd card
Place to keep all my PMOD modules
- Size
- 32.1 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 10
- Pads
- 43
- Tracks, vias
- 89, 12
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Oct 2024
- Updated
- 18 Dec 2025
Overview
Pmod sd card is an open-source printed circuit board by SteveLRojas, from the SteveLRojas/pmod_modules repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 32.1 × 20 mm with 10 parts on 10 nets, routed with 89 tracks and 12 vias.
It is built around the MSD-4-A. Its parts include 6 resistors, 2 capacitors and 1 connector.
Main components
1README
pmod_usb_serial/README.mdpmod_usb_serial
USB to UART module using a CP2102 chip. The module has a 6 pin PMOD interface suitable for the Basys 2 FPGA board.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | MSD-4-A | MSD-4-A:MSD4A | J1 |
| 1 | PMOD-Device-x2-Type-1A-GPIO | pmod-conn_6x2:pmod_6x2_pin | PMOD1 |
More from SteveLRojas/pmod_modules
9- 2 layers47.2 × 69.1 mm

- 2 layers44.3 × 18.3 mm

- 2 layers54 × 22.9 mm

- 2 layers46.5 × 18.5 mm

Pmod level shifter 8p
SteveLRojas/pmod_modules
Place to keep all my PMOD modules
14 partsCERN-OHL-P-2.0 - 2 layers31.7 × 86.4 mm

- 2 layers28.5 × 16.3 mm

Pmod level shifter 4p
SteveLRojas/pmod_modules
Place to keep all my PMOD modules
10 partsCERN-OHL-P-2.0 - 2 layers33.1 × 17 mm

- 2 layers25 × 19 mm

- 2 layers22.9 × 20.3 mm

Similar boards
- 2 layers100 × 63.7 mm

- 4 layers165 × 50 mm

- 4 layers60 × 75.4 mm

TR3V4
Tufts-SEDS-Rocketry/TR4-Kindlevan
The code repository for everything related to to the TR4 Kindlevin rocket including code for the flight computer, airbrakes and the rocket tracking antenna.
97 parts3 - 2 layers68 × 42 mm

- 4 layers40 × 75 mm

CUR flight computer 25-26
CU-Rocketry/flight_computer
Competition Flight Computer Module 25-26
169 parts1 - 4 layers90.4 × 56 mm

- 2 layers

Skematik Main Compressor V1
Febriyandi12/Desain_PCB
Kolaborasi untuk update desain pcb yang telah di research
92 parts1 - 6 layers50 × 50 mm

MUSIC PLAYER
Ace6Rings/MUSIC-PLAYER
Why did I build something like this? Well, I am sick and tired of buying spotify premium every month. I looked for mp3 players online but nearly all of them have the same flaw(s).
96 partsMIT
Questions
How big is the Pmod sd card PCB?
It measures 32.1 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pmod sd card use?
10 parts, built around the MSD-4-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pmod sd card KiCad files?
From the SteveLRojas/pmod_modules repository on GitHub, at the commit this page was made from: the board is pmod_sd_card/pmod_sd_card.kicad_pcb and its schematic PMOD_HDMI/PMOD_HDMI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pmod sd card design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).