

Alchemy
Reusable microcontroller module with USB
- Size
- 55 × 85 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 65
- Nets
- 70
- Pads
- 276
- Tracks, vias
- 488, 72
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Dec 2023
- Updated
- 31 Oct 2026
Overview
Alchemy is an open-source printed circuit board by SteveLRojas, from the SteveLRojas/Alchemy repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 55 × 85 mm with 65 parts on 70 nets, routed with 488 tracks and 72 vias.
It is built around the CH32V203C8T6, LM5164DDA and CH213K, with the AMS1117-3.3 and MT9700 among its other parts. Its parts include 23 capacitors, 15 resistors, 9 connectors, 6 ICs and 1 diode. It belongs with the RISC-V boards of this library.
Main components
5CH32V203C8T6
LQFP-48(7x7)144MHz 64KB FLASH Others LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)LM5164DDA
SOIC8100-V Input, 1-A Synchronous Buck DC/DC Converter with Ultra-low IQTexas InstrumentsUncategorisedCH213K
SOT-23-32.2V~5.5V 240mV 240mΩ 3.6uA Integrated FET SOT-23-3 ORing Controllers ROHSWCH (Nanjing Qinheng Microelectronics)Power Distribution SwitchesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMT9700
SOT-23-5-40℃~+85℃ 1 2.4V~5.5V 2A 80mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Overcurrent Protection(OCP)、Over Temperature Protection SOT-23-5 Power Distribution Switches ROHS西安航天民芯Power Distribution Switches
README
README.mdAlchemy
Reusable microcontroller module with USB
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C9, C11, C18, C19, C20, C24, C25, C26, C27 |
| 4 | 22u | Capacitor_SMD:C_1206_3216Metric | C5, C6, C7, C8 |
| 4 | 5K1 | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | TestPoint | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP1, TP2, TP3, TP4 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R3, R6 |
| 3 | 2.2n | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4 |
| 3 | 4.7K | Resistor_SMD:R_0805_2012Metric | R11, R13, R15 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7, J8 |
| 3 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J5, J9 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C15, C16 |
| 2 | 2.2u | Capacitor_SMD:C_1206_3216Metric | C1, C10 |
| 2 | 20p | Capacitor_SMD:C_0805_2012Metric | C13, C14 |
| 2 | CH213K | Package_TO_SOT_SMD:SOT-23 | U3, U5 |
| 2 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2, J3 |
| 1 | 100u | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 330k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 560k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | CH32V203C8T6 | CH32V203:CH32V203C8T6_LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Horizontal | J1 |
| 1 | LL3301NF065QG | SamacSys_Parts:LL3301NF065QG | S1 |
| 1 | LM5164DDA | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U2 |
| 1 | MT9700 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | ORANGE | LED_SMD:LED_0805_2012Metric | D1 |
More from SteveLRojas/Alchemy
5- 4 layers55 × 85 mm

- 4 layers55 × 85 mm

- 2 layers38 × 61 mm

Alchemy to Landungsbruecke
SteveLRojas/Alchemy
Reusable microcontroller module with USB
3 parts1CERN-OHL-P-2.0 - 2 layers38 × 61 mm

Alchemy to Landungsbruecke
SteveLRojas/Alchemy
Reusable microcontroller module with USB
2 parts1CERN-OHL-P-2.0 - 2 layers38 × 61 mm

Alchemy to Landungsbruecke
SteveLRojas/Alchemy
Reusable microcontroller module with USB
2 parts1CERN-OHL-P-2.0
Similar boards
- 2 layers17.8 × 33 mm

- 2 layers96.6 × 100 mm

- 4 layers102.1 × 73.8 mm

Tape Emulator
SteveLRojas/MC-10_Tape_Emulator
Unified HW and SW repository for the TRS-80 MC-10 tape emulator project.
95 parts2 - 2 layers52 × 84 mm

- 2 layers87 × 72 mm

- 4 layers45.7 × 45.7 mm

- 2 layers

- 2 layers68 × 32 mm

IC2E ESC S50 DualSpool v1
AVIUS001/ic2e-esc-design-journey-public
Public-safe Aerial8/IC2E ESC design-journey overview (no manufacturable IP)
13 parts
Questions
How big is the Alchemy PCB?
It measures 55 × 85 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Alchemy use?
65 parts, built around the CH32V203C8T6, LM5164DDA, CH213K and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Alchemy KiCad files?
From the SteveLRojas/Alchemy repository on GitHub, at the commit this page was made from: the board is V2.0A/Alchemy.kicad_pcb and its schematic Alchemy_to_Landungsbruecke/V1.0/Alchemy_to_Landungsbruecke.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Alchemy design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).