Skip to the content
2 layers99.8 × 99.8 mmProtoboard, the printed circuit board in 3D

Single Board 68k Computer

Size
99.8 × 99.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
91
Nets
64
Pads
964
Tracks, vias
523, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
6 May 2022
Updated
22 Nov 2022

Overview

Protoboard is an open-source printed circuit board by stevegg, from the stevegg/Steve-68k repository on GitHub. It is a 2-layer board of 99.8 × 99.8 mm with 91 parts on 64 nets, routed with 523 tracks and 0 vias.

README

README.md

Steve's 68k

Steve 68k

This is my extremely simple 68000 single board computer. It has 512k of ROM and 512k of RAM.

What's the Point?

I'm building this to learn the fundamentals of microprocessors and their use in computer systems. Modern day computers are complex and require specific supporting chip sets. These retro processors were simple and much easier to understand but in the end the principles are the same.

This design HEAVILLY borrows from Neil Klingensmith whose explanations really helped me grasp some of the fundamentals.

V20220621 was sent for fab on the evening of June 21, 2022. This version's changes:

  • 5v input via Barrel Plug and uses a 7805 to regulate the voltage
  • Changes from 1.8432Mhz Clock Oscillator to a 3.6864Mhz for the UART CLK
  • Added pull-up resistors for the DTACK input lines to the GAL
  • Added an ERROR indicator LED and ERROR output line to the BUS
  • Changed Serial connectors to standard FTDDI connector layout
  • Added RTS and CTS lines to Serial connector pulled from the IP and OP ports on the 68681
  • Fixed D0 label on BUS (was A0)
  • Added A17 and A18 to the GAL to allow for more fine grained address decoding
  • Other minor fixes

Still having a problem with serial input....challenges are what make the victory sweeter I suppose.

Schematic

Parts

91
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
1Conn_02x32_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x32_P2.54mm_VerticalJ2
1Conn_02x32_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x32_P2.54mm_HorizontalJ1
1quadCommon:quadRAIL1

The 7 most common of 91 parts.

More from stevegg/Steve-68k

7
  • 2 layers177 × 140.7 mmSteve 68k, the printed circuit board in 3D

    Steve 68k

    stevegg/Steve-68k

    Single Board 68k Computer

    91 parts2
  • 2 layers99.8 × 99.8 mmProtoboard PLCC, the printed circuit board in 3D

    Protoboard PLCC

    stevegg/Steve-68k

    Single Board 68k Computer

    82 parts2
  • 2 layers99.8 × 99.8 mmStatusBoard, the printed circuit board in 3D

    StatusBoard

    stevegg/Steve-68k

    Single Board 68k Computer

    45 parts2
  • 2 layers99.8 × 99.8 mmCPU Board, the printed circuit board in 3D

    CPU Board

    stevegg/Steve-68k

    Single Board 68k Computer

    33 parts2
  • 2 layers105.9 × 99.8 mmBackplane, the printed circuit board in 3D

    Backplane

    stevegg/Steve-68k

    Single Board 68k Computer

    25 parts2
  • 2 layers99.8 × 99.8 mmIO Board, the printed circuit board in 3D

    IO Board

    stevegg/Steve-68k

    Single Board 68k Computer

    17 parts2
  • 2 layers99.8 × 99.8 mmRAM and ROM, the printed circuit board in 3D

    RAM and ROM

    stevegg/Steve-68k

    Single Board 68k Computer

    15 parts2

Similar boards

  • 2 layers237.5 × 102.9 mmAlu, the printed circuit board in 3D

    Alu

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    91 parts301Unlicense
  • 2 layers132.5 × 84.8 mmShieldXL M, the printed circuit board in 3D

    ShieldXL M

    okyeron/shieldXL

    A rework/remix of the monome norns shield

    91 parts179GPL-3.0
  • 2 layers100 × 68 mmSI4684 SMD, the printed circuit board in 3D

    SI4684 SMD

    PE5PVB/SI4684-DAB-Receiver

    SI4684 ESP32 DAB Receiver

    91 parts135GPL-3.0
  • 2 layers160 × 99.5 mmSupply Board, the printed circuit board in 3D

    Supply Board

    jherkenhoff/STM

    DIY scanning tunneling microscope (STM)

    91 parts88
  • 2 layers213 × 60 mmVController main board, the printed circuit board in 3D

    VController main board

    sixeight7/VController_v3

    Production model of the VController, VC-mini and VC-touch

    91 parts80
  • 2 layers301.6 × 116.9 mmOpus, the printed circuit board in 3D

    Opus

    cfbender/keyboards

    A collection of all of my keyboard projects

    91 parts64MPL-2.0
  • 2 layers89 × 123.4 mmNsec badge-2025, the printed circuit board in 3D

    Nsec badge-2025

    nsec/nsec-badge

    Software from the NorthSec badge

    91 parts62
  • 2 layers167 × 122.8 mmBoardv3, the printed circuit board in 3D

    Boardv3

    compressionKeyboards/compression4c

    This repo contains the files to order a custom PCB for (4c), checkout the zmk layout to build firmware!

    91 parts60

Questions

How big is the Protoboard PCB?

It measures 99.8 × 99.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Protoboard use?

91 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Protoboard KiCad files?

From the stevegg/Steve-68k repository on GitHub, at the commit this page was made from: the board is protoboard/Protoboard.kicad_pcb and its schematic Backplane/Backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Protoboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask stevegg before reusing the design.