Skip to the content
2 layers105.9 × 99.8 mmBackplane, the printed circuit board in 3D

Single Board 68k Computer

Size
105.9 × 99.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
74
Pads
368
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 6 (file 20211014)
Created
6 May 2022
Updated
22 Nov 2022

Overview

Backplane is an open-source printed circuit board by stevegg, from the stevegg/Steve-68k repository on GitHub. It is a 2-layer board of 105.9 × 99.8 mm with 25 parts on 74 nets.

It is built around the MAX705CSA. Its parts include 8 capacitors, 6 connectors, 1 resistor, 1 IC and 1 diode.

Main components

1

README

README.md

Steve's 68k

Steve 68k

This is my extremely simple 68000 single board computer. It has 512k of ROM and 512k of RAM.

What's the Point?

I'm building this to learn the fundamentals of microprocessors and their use in computer systems. Modern day computers are complex and require specific supporting chip sets. These retro processors were simple and much easier to understand but in the end the principles are the same.

This design HEAVILLY borrows from Neil Klingensmith whose explanations really helped me grasp some of the fundamentals.

V20220621 was sent for fab on the evening of June 21, 2022. This version's changes:

  • 5v input via Barrel Plug and uses a 7805 to regulate the voltage
  • Changes from 1.8432Mhz Clock Oscillator to a 3.6864Mhz for the UART CLK
  • Added pull-up resistors for the DTACK input lines to the GAL
  • Added an ERROR indicator LED and ERROR output line to the BUS
  • Changed Serial connectors to standard FTDDI connector layout
  • Added RTS and CTS lines to Serial connector pulled from the IP and OP ports on the 68681
  • Fixed D0 label on BUS (was A0)
  • Added A17 and A18 to the GAL to allow for more fine grained address decoding
  • Other minor fixes

Still having a problem with serial input....challenges are what make the victory sweeter I suppose.

Schematic

Parts

25
QtyValueFootprintReferences
6MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4, H5, H6
4100uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1, C2, C3, C4
4Conn_02x32_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x32_P2.54mm_VerticalJ3, J4, J5, J6
2.1uFCapacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mmC7, C8
1100nfCapacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mmC6
1330RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1470uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC5
18MhzOscillator:Oscillator_DIP-8X1
1Conn_02x32_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x32_P2.54mm_HorizontalJ1
1Max705Package_DIP:DIP-8_W7.62mm_LongPadsU1
1PowerLED_THT:LED_D5.0mmD1
1ResetButton_Switch_THT:SW_PUSH_6mmSW1
1USB CConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2

More from stevegg/Steve-68k

7
  • 2 layers177 × 140.7 mmSteve 68k, the printed circuit board in 3D

    Steve 68k

    stevegg/Steve-68k

    Single Board 68k Computer

    91 parts2
  • 2 layers99.8 × 99.8 mmProtoboard, the printed circuit board in 3D

    Protoboard

    stevegg/Steve-68k

    Single Board 68k Computer

    91 parts2
  • 2 layers99.8 × 99.8 mmProtoboard PLCC, the printed circuit board in 3D

    Protoboard PLCC

    stevegg/Steve-68k

    Single Board 68k Computer

    82 parts2
  • 2 layers99.8 × 99.8 mmStatusBoard, the printed circuit board in 3D

    StatusBoard

    stevegg/Steve-68k

    Single Board 68k Computer

    45 parts2
  • 2 layers99.8 × 99.8 mmCPU Board, the printed circuit board in 3D

    CPU Board

    stevegg/Steve-68k

    Single Board 68k Computer

    33 parts2
  • 2 layers99.8 × 99.8 mmIO Board, the printed circuit board in 3D

    IO Board

    stevegg/Steve-68k

    Single Board 68k Computer

    17 parts2
  • 2 layers99.8 × 99.8 mmRAM and ROM, the printed circuit board in 3D

    RAM and ROM

    stevegg/Steve-68k

    Single Board 68k Computer

    15 parts2

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

How big is the Backplane PCB?

It measures 105.9 × 99.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Backplane use?

25 parts, built around the MAX705CSA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Backplane KiCad files?

From the stevegg/Steve-68k repository on GitHub, at the commit this page was made from: the board is Backplane/Backplane.kicad_pcb and its schematic Backplane/Backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Backplane design in my own project?

Its repository states no licence, so its author keeps all rights: ask stevegg before reusing the design.