
OSS Radio Hardware Design
Arkos-Engineering/HT-15_hardware
We can split this out into separate repos later, right now its very convenient to have everything here.

Interface is an open-source printed circuit board by Step7dk, from the Step7dk/Sabre-Lite--2--PCI-e-interconnect repository on GitHub. It is a 2-layer board of 36 × 25 mm with 32 parts on 34 nets, routed with 222 tracks and 36 vias.
It is built around the AMS1117-1.8 and PI6CG18201ZDIEX. Its parts include 15 capacitors, 7 resistors, 2 ICs, 2 connectors and 1 crystal. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C6, C9, C10, C15 |
| 4 | 0 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5, R6, R7 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C7, C13 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5, C8, C14 |
| 2 | 8p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12 |
| 1 | 1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 12V | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP1 |
| 1 | 1R5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 25MHz | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | AMS1117-1.8 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x07_MountingPin | Connector_Molex:Molex_PicoBlade_53047-0710_1x07_P1.25mm_Vertical | J1 |
| 1 | GND | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP2 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1 |
| 1 | PCI_Express_x1 female connector | Kharars-KiCAD-lib:PCIE03602FDTH | J2 |
| 1 | PI6CG18201ZDIEX | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | IC1 |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
The 30 most common of 32 parts.

Arkos-Engineering/HT-15_hardware
We can split this out into separate repos later, right now its very convenient to have everything here.




electrodyssey/lboard2
experimental Spartan-6 sound processing board with XC6SLX9-TQG144 and TLV320AIC3204



RapportTecnologia/kit-de-prototipacao-educacional-e-engenharia
KEPR - Kit Educacional de Prototipação Rapport, é um kit que visa trazer total flexibilidade ao desenvolvimento de sistemas embarcados e IoT, permitindo trocar facilmente o processador e até mesmo Rede e WiFi sem…
It measures 36 × 25 mm and has 2 copper layers, 0.96 mm thick.
32 parts, built around the AMS1117-1.8 and PI6CG18201ZDIEX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Step7dk/Sabre-Lite--2--PCI-e-interconnect repository on GitHub, at the commit this page was made from: the board is Interface.kicad_pcb and its schematic Interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Step7dk before reusing the design.