Skip to the content
2 layers177.8 × 115.6 mmPCB board, the printed circuit board in 3D

This project is an Open Source initiative to make a fully autonomous robot for grass cutting. Later much bigger stuff.

Size
177.8 × 115.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
109
Nets
88
Pads
430
Tracks, vias
914, 71
Pours
450
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
24 Jun 2020
Updated
26 Aug 2021

Overview

PCB board is an open-source printed circuit board by steger123, from the steger123/Lawn-mower-robot repository on GitHub. It is a 2-layer board of 177.8 × 115.6 mm with 109 parts on 88 nets, routed with 914 tracks and 71 vias.

It is built around the ADS1115. Its parts include 23 connectors, 5 ICs, 2 switches and 1 diode. It belongs with the robots and motor control boards of this library.

Main components

1

README

README.md

Lawn-mower-robot

alt text

The main purpose of the project:

Create a general, affordable, computational platform, which can be used for small & medium size robots.

The navivation can be: fully maunal, semi and full autonomouse. The mechanical side not restricted. As the project progressing and evolving You can learn more and more, and of course, have the designs and codes for free.

Software:

BASE:

Mission Planner: C# https://github.com/steger123/Lawn-mower-robot/tree/master/03_Software%20codes/02_C%23_Mission%20planner

ROVER:

Main MCU : C++ (Arduino) https://github.com/steger123/Lawn-mower-robot/tree/master/03_Software%20codes/01_C%2B%2B_Arduino/01_Rover/Test_Motor_v12

AI: Python (Jetson NANO) https://github.com/steger123/Lawn-mower-robot/tree/master/03_Software%20codes/03_Python_AI_Jetson%20Nano/01_myOpenCV

ROVER Electronic boards:

  1. Arduino MEGA later Shieldbuddy TC375 (It has 3 cores !)
  2. Custom made shield, sitting on the Arduino MEGA to have enough space for connectors (4xseial, 4xSPI, 3xI2C, buttons, 3xultrasonic sensos, volt & ampere meter etc.).
  3. GPS: 2 x GNSS modules with RTK / Xbee. More here: https://github.com/steger123/Lawn-mower-robot/issues/8
  4. Base's RTK: simpleRTK2Blite from Ardusimple or GPS Development Tools SparkFun GPS-RTK-SMA Breakout - ZED-F9P
  5. Rovers RTK: RTK+INS simpleRTK2B-F9R V3 from Ardusimple or SparkFun Accessories SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R
  6. Motor controllers: 2x DC
  7. RF radio: for additional Base to Rover and back communication (remote controll, getting sensor date from rover to mission control software).
  8. Jetson Nano with normal webcam. Communicating via serial port to the MEGA (detect plant diseases, following plant line)
  9. Sensors on the shield (utlrasonoic distance, battery volt, curret mesuring, rain etc.)

Body:

As you like. In scouting for example: 1m x 1m x 0.5m

Wheels:

As you like. In scouting for example: driven 280 mm in diamteter + castor wheels. it can be smoot like a bicycle or thick lugs like on a tractor tire (good grippong during scouting on the field).

Engine/motor:

As you like. In scouting for example: 2x 50W DC motors with encoders. 50 rpm

Transmission:

As you like. In scouting for example: plannetary gerabox.

Collaboration (software, electronic hardware, new PCB/shield, mechanical parts etc.):

If You like to join, please contact me: andras.steger@protonmail.com

More information: https://github.com/steger123/Lawn-mower-robot/wiki

Latest news:

https://twitter.com/StegerAndras

alt text alt text

Custom robot rover shield for Arduino MEGA or ShieldBuddy TC375: alt text

Parts

109
QtyValueFootprintReferences
10.Arduino:Terminal_p8J5, J6, J7, J9, J10, J11, J15, J16, J18, J19
10s1Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalA1, A2, A3, A4, A5, A6, A7, D1, D2, D3
7.Arduino:1_pin., ., ., ., ., ., .
7HEADER_3Arduino:Terminal_p3_spP1, P2, P3, P4, P5, P6, P7
5100nFCapacitor_THT:C_Disc_D10.5mm_W5.0mm_P5.00mm100n1, 100n2, 100n6, 100n7, 100n8
41pinArduino:1pin., ., ., .
310kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal10k1, 10k2, 10k3
2.Arduino:Terminal_p10J14, J17
2100nCapacitor_THT:C_Disc_D7.5mm_W5.0mm_P7.50mm100n4, 100n5
215A1Shield:Fuse15A1, 15A2
21uCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm1u2, 1u3
2HEADER_2Arduino:Terminal_p2J1, J3
2LOGOShield:parrotG***, G***
2Ultrason_RightConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalUCenter1, URight1
1100 uFCapacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm100uF1
110kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical10k4
112V Mot1 OUTTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalMotDrive1
112V Mot2 OUTTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalMotDrive2
11N4001Diode_THT:D_5W_P5.08mm_Vertical_AnodeUpD4
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal1k1
11uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm1u1
12AShield:Fuse2A1
12k2Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical2k2
1470uFCapacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm470uF1
147k1Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal47k1
14k7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalPullup1
14k7Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical4k7
16k8Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical6k8
1ACS712_30AMy_footprint_library:ASC712U3
1ADS1115Arduino:ADS1115U6
1CompassConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalCompass1
1Current sensorConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalCurrent1
1GPSConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalGPS1
1GSMConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalGSM1
1GSP rovConnector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalGPS2
1HEADER_3Arduino:Terminal_p3P8
1I2CConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalI2C1
1LCD displayConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalLCD1
1LM4040 2.5VArduino:TO-92S1
1LM7803_TO220Package_TO_SOT_THT:TO-220-3_VerticalU5
1LM7805_TO220My_footprint_library:Traco_TSR2U7
1MA_ControlConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalMA_Control1
1MA_enc1Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalMA_enc1
1MB encoderConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalMB_enc1
1MB_ControlConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalMB_Control1
1PS2_ControllConnector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalPS2
1RF rovConnector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalRF1
1RTCConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalRTC1
1Rain SensorConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalRain1
1SD cardConnector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalSD1
1STTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalU4
1ST_01x04Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ2
1SW_DIP_x01TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalSW1
1Serial 0Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalSerial1
1Switch Manual/AutoConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalMan/Auto1
1Temp sensorConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalTemp1
1TestBtn1Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalButton1
1TestBtn2Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalButton2
1TestBtn3Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalButton3
1Ultrasonic LeftConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalULeft1
1XBeeConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalXBee1

The 107 most common of 109 parts.

More from steger123/Lawn-mower-robot

1
  • 2 layers94 × 64.8 mmPCB LoRa 32, the printed circuit board in 3D

    PCB LoRa 32

    steger123/Lawn-mower-robot

    This project is an Open Source initiative to make a fully autonomous robot for grass cutting. Later much bigger stuff.

    36 parts11

Similar boards

  • 2 layers168.9 × 123.3 mmOEM ECU, the printed circuit board in 3D

    OEM ECU

    aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware

    Volvo MKII Open Hardware

    296 parts161CC0-1.0
  • 2 layers94 × 79 mm5 - Lizard Car, the printed circuit board in 3D

    5 - Lizard Car

    TRD-B/Lizard

    3D printed RC race car with custom electronics

    54 parts129CC-BY-4.0
  • 2 layers54.6 × 33 mmJuntekOnSteroidsTTGO, the printed circuit board in 3D

    JuntekOnSteroidsTTGO

    rin67630/Drok-Juntek-on-steroids

    Extend the possibilities of cheap digital power supplies with a WiFi module

    35 parts62
  • 2 layers155 × 70 mmPayphone v1, the printed circuit board in 3D

    Payphone v1

    sdylewski/Analog-Redial

    A circuit board for old telephones to come back to life. Plug one or two phones in, and you can call the other phone, use bluetooth, connect to others via voip, and do a variety of other things with a plain old rotary…

    137 parts46
  • 2 layers32.4 × 33 mmOpenXsensor, the printed circuit board in 3D

    OpenXsensor

    Ingwie/OpenAVRc_Hw

    OpenAVRc Hardware and addons

    40 parts26
  • 2 layers33.9 × 90 mmBiasPro InputProtection v3, the printed circuit board in 3D

    BiasPro InputProtection v3

    ToneAlchemy/BiasPro

    A professional-grade, dual-probe Arduino Bias Meter for guitar tube amplifiers. Open source hardware & firmware

    18 parts16MIT
  • 4 layers52.5 × 59.7 mmESPHome Indoor Multi Sensor, the printed circuit board in 3D

    ESPHome Indoor Multi Sensor

    mikelawrence/esphome-indoor-multi-sensor-hardware

    ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.

    113 parts14CERN-OHL-P-2.0
  • 4 layers260 × 113 mmCellKeeper, the printed circuit board in 3D

    CellKeeper

    cellkeeper-bms/cellkeeper-hardware

    PCB for the CellKeeper BMS

    480 parts11GPL-3.0

Questions

How big is the PCB board PCB?

It measures 177.8 × 115.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PCB board use?

109 parts, built around the ADS1115. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PCB board KiCad files?

From the steger123/Lawn-mower-robot repository on GitHub, at the commit this page was made from: the board is 02_Electronic desings/PCB board/PCB board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PCB board design in my own project?

Its repository states no licence, so its author keeps all rights: ask steger123 before reusing the design.