
BardsAssistant
jaylingelbach/BardAssistant
A tiny “Vicious Mockery” companion built on an ESP32-S3 DevKitM-1.

Hardware repository for our GPU External Power Supply
Gpu external power supply is an open-source printed circuit board by starboundstitch, from the starboundstitch/gpu-external-power-supply repository on GitHub, published under the GPL-3.0 licence. It is a 6-layer board of 152.5 × 128.3 mm with 345 parts on 223 nets, routed with 1,906 tracks and 1,023 vias.
It is built around the AOZ5276QI, TPS536C7B1RSLT and USBLC6-2SC6, with the 150080SS75000 among its other parts. Its parts include 225 capacitors, 55 resistors, 17 ICs, 16 inductors and 10 connectors. It belongs with the power boards and the STM32 boards of this library.
The GPU External Power Supply is a project that aims to replace any computer graphics cards' power delivery system with a completely custom board. This repository contains all code, firmware, and schematics required to build the card as well as documentation on how it works.
The sister repository geps-app contains the code for the GUI application.
The External GPU Power Card is a designed to seamlessly integrate with existing GPUs. It works by replacing the Vcore and Vmem rails with new power stages that have reduced noise, an increased voltage range, and an increased maximum current which should provide additional stability and performance benefits.
The power supply also allows full control of its voltage characteristics to provide unlimited overclocking potential. The device integrates with our companion application to provide real time monitoring and adjustment using a GUI interface, allowing more informed decisions in the overclocking process to extract as much performance as possible.


This section contains the KICAD project and all the associated files.
We make extensive use of hierarchy in this project and have the following schematics:
This section contains all micro-controller code and is using the rust language with the stmf4XX-hal library.
[!CAUTION] The stm32f401RE that is used does NOT have enough SRAM to run in debug mode and it will NOT flash.
The controller should automatically build and flash with:
cargo run --releaseAdditionally, in the future we will support flashing via USB DFU mode (instructions TBD).
All the code and hardware files in this repository are licensed according to the GPLv3 in the LICENSE file.
In addition, many of the symbols and footprints are provided by the manufacturers for use and are thus liable under the manufactures' licenses.
This project was created by @Xunnin, @starboundstitch, and @StefClef.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 53 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C11003, C11006, C11007, C11017, C12003, C12006, C12007, C12017, C13003, C13006, C13007, C13017, C14003, C14006, C14007, C14017 +37 |
| 24 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C11002, C11004, C12002, C12004, C13002, C13004, C14002, C14004, C15002, C15004, C16019, C16021, C17002, C17004, C18002, C18004 +8 |
| 24 | 22uF | Capacitor_SMD:C_0805_2012Metric | C11008, C11012, C12008, C12012, C13008, C13012, C14008, C14012, C15008, C15012, C16025, C16029, C17008, C17012, C18008, C18012 +8 |
| 22 | 220uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C11011, C11014, C12011, C12014, C13011, C13014, C14011, C14014, C15011, C15014, C16028, C16031, C17011, C17014, C18011, C18014 +6 |
| 15 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C2007, C3016, C6016, C7003, C7005, C9016, C11016, C12016, C13016, C14016, C15016, C16033, C17016, C18016, C19016 |
| 15 | 47uF | Capacitor_SMD:C_1210_3225Metric | C3010, C4004, C4005, C4006, C6010, C9010, C11010, C12010, C13010, C14010, C15010, C16027, C17010, C18010, C19010 |
| 12 | 0 | Resistor_SMD:R_0402_1005Metric | R3002, R6002, R9002, R11002, R12002, R13002, R14002, R15002, R16004, R17002, R18002, R19002 |
| 12 | 150nH | work:IND_IHVR-4025JZ-3Z_VIS | L3001, L6001, L9001, L11001, L12001, L13001, L14001, L15001, L16002, L17001, L18001, L19001 |
| 12 | 2.2 | Resistor_SMD:R_0402_1005Metric | R3001, R6001, R9001, R11001, R12001, R13001, R14001, R15001, R16003, R17001, R18001, R19001 |
| 12 | 22uF | Capacitor_SMD:C_0402_1005Metric | C3015, C6015, C9015, C11015, C12015, C13015, C14015, C15015, C16032, C17015, C18015, C19015 |
| 12 | 47pF | Capacitor_SMD:C_0402_1005Metric | C3001, C6001, C9001, C11001, C12001, C13001, C14001, C15001, C16018, C17001, C18001, C19001 |
| 12 | 47uF | Capacitor_SMD:C_0805_2012Metric | C3013, C6013, C9013, C11013, C12013, C13013, C14013, C15013, C16030, C17013, C18013, C19013 |
| 12 | AOZ5276QI | work:AOZ5276QI | U3001, U6001, U9001, U11001, U12001, U13001, U14001, U15001, U16002, U17001, U18001, U19001 |
| 10 | 470uF | work:CP_EIA-7343-40_Kemet-Y | C6009, C11009, C12009, C13009, C14009, C15009, C16026, C17009, C18009, C19009 |
| 7 | 10k | Resistor_SMD:R_0201_0603Metric | R2013, R2014, R2015, R2016, R2017, R2018, R7003 |
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2002, C2010, C2011, C2012, C5003, C5004 |
| 5 | CK_KMS2xxG | work:KEY-SMD_4P-L6.0-W6.0-P3.90-LS9.0 | SW8001, SW8002, SW8003, SW8004, SW8005 |
| 4 | 100 | Resistor_SMD:R_0402_1005Metric | R7005, R7006, R7007, R7008 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R5006, R7004, R7009, R7011 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R2001, R2002, R2007, R2008 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4007, C4008, C4009, C5006 |
| 4 | 150080SS75000 | LED_SMD:LED_0603_1608Metric | D4001, D5001, D5002, D7002 |
| 4 | 330uF | work:CP_EIA-7343-40_Kemet-Y | C3009, C3011, C9009, C9011 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 3 | 170nH | work:IND_IFLR4031GCERR17M01_VIS | L4001, L4002, L4003 |
| 3 | 470uF | Capacitor_SMD:CP_Elec_8x10.5 | C4016, C4017, C4018 |
| 3 | 6490XX227222_649006227222 | work:PCIe_2x3_Conn_Header | J4003, J4005, J4006 |
| 2 | 100pF | Capacitor_SMD:C_0402_1005Metric | C2003, C2005 |
| 2 | 130k | Resistor_SMD:R_0603_1608Metric | R2003, R2010 |
| 2 | 1m | Resistor_SMD:R_Shunt_Vishay_WSK2512_6332Metric_T1.19mm | R2019, R2020 |
| 2 | 1nF | Capacitor_SMD:C_0402_1005Metric | C2001, C2004 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C7001, C7002 |
| 2 | 220pF | Capacitor_SMD:C_0402_1005Metric | C2008, C2009 |
| 2 | 37.4k | Resistor_SMD:R_0402_1005Metric | R2004, R2011 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R7001, R7002 |
| 2 | 82 | Resistor_SMD:R_0805_2012Metric | R5002, R5004 |
| 2 | Conn_02x02_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J2001, J2005 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric | R4001 |
| 1 | 2.2uH | work:IND-SMD_L7.2-W6.6_GPSR07X0 | L5002 |
| 1 | 3.3nF | Capacitor_SMD:C_0402_1005Metric | C5005 |
| 1 | 680 | Resistor_SMD:R_0805_2012Metric | R7010 |
| 1 | 8Mhz, 16pF | Crystal:Crystal_SMD_HC49-SD_HandSoldering | Y7001 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left | J1003 |
| 1 | Conn_01x04_Pin | work:CONN_PPTC041LFBN-RC_SUL | J8001 |
| 1 | Conn_01x10_Pin | Connector_JST:JST_PH_S10B-PH-K_1x10_P2.00mm_Horizontal | J1001 |
| 1 | Conn_ARM_JTAG_SWD_10 | work:CNC_3221-10-0100-00 | J7002 |
| 1 | D_Zener (Vz = 10V) | work:SOD123_DIO | D4002 |
| 1 | D_Zener (Vz = 1V) | work:P25_DO-214AC_SMA | D5005 |
| 1 | D_Zener (Vz = 2.7V) | work:SOD123_DIO | D5004 |
| 1 | GG060303100N2P | Diode_SMD:D_0603_1608Metric | D7001 |
| 1 | LOGO | user-footprints:stitchy_pic_b | G*** |
| 1 | STM32F401RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U7001 |
| 1 | SW_Wuerth_450301014042 | work:SW-SMD_K3-1280S-K1 | SW7001 |
| 1 | TPS536C7B1RSLT | work:QFN48_6X6_TEX | U2001 |
| 1 | TPS62143RGTR | TPS62143RGTR:QFN50P300X300X100-17N | U5003 |
| 1 | TPS73633DBVR | Package_TO_SOT_SMD:SOT-23-5 | U5002 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U7003 |
| 1 | USB_C_Receptacle_USB2.0_16P | work:USB-C_SMD-TYPE-C-31-M-12 | J7003 |
| 1 | Vd = 1.25V | work:SOD123_DIO | D5003 |
The 344 most common of 345 parts.

jaylingelbach/BardAssistant
A tiny “Vicious Mockery” companion built on an ESP32-S3 DevKitM-1.

mikegoelzer/Homebrew-ECP5-SBC
Kicad files for homebrew hobbyist computer with custom RISC-V CPU

coelacant1/Protogen-Electronics
SmartMatrix SmartLED Shield breakout for Protogen hardware

BayLibre/Copilot-extension-triple-usb-2.0
Extension board for Copilot Lite providing 3 USB 2.0 passthrough channels.


BayLibre/Labrack
A standard 1U rack front panel metal sheet and PCB providing power, connectivity and more.

MiniNugen/Custom_Inverter_Hardware
PCBProjectNameREV1.PrjPCB | Source Documents | | PCBProjectNameREV1.SchDOC | | PCBProjectNameREV1.PcbDOC | | BOM | Settings | Libraries

It measures 152.5 × 128.3 mm and has 6 copper layers, 1.6 mm thick.
345 parts, built around the AOZ5276QI, TPS536C7B1RSLT, USBLC6-2SC6 and 150080SS75000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the starboundstitch/gpu-external-power-supply repository on GitHub, at the commit this page was made from: the board is hardware/gpu-external-power-supply.kicad_pcb and its schematic hardware/12V_Supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).