

Booster
Add paths to your bash/zsh rc for convenience
- Size
- 44 × 64 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 43
- Pads
- 128
- Tracks, vias
- 178, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241129)
- Created
- 13 Aug 2024
- Updated
- 18 Dec 2025
Overview
Booster is an open-source printed circuit board by stanislavstarcha, from the stanislavstarcha/powerbox repository on GitHub. It is a 2-layer board of 44 × 64 mm with 41 parts on 43 nets, routed with 178 tracks and 11 vias.
It is built around the ADUM1200BR, CD4051BE and IRLML0030, with the VOM1271T among its other parts. Its parts include 23 resistors, 5 capacitors, 5 ICs, 4 transistors and 3 connectors.
Main components
4ADUM1200BR
SOIC-8-40℃~+125℃ 0 10Mbps 2 2 2.7V~5.5V 2.7V~5.5V 2500 25kV/us 50ns Bidirectional signal isolation、Multi-voltage domain interface SOIC-8 Digital Isolators ROHSAnalog DevicesDigital IsolatorsCD4051BE
PDIP-16-55℃~+125℃ 125Ω 20MHz 3V~20V 450ns 8 8:1 PDIP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersIRLML0030
SOT-23-55℃~+150℃ 1 N-channel 2.3V 2.6nC 27mΩ@10V 30V 382pF 39pF 5.3A SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsVOM1271T
SOP-4-2.54mm-40℃~+100℃ 1.4V 24us 4.5kV 50mA 53us SOP-4-2.54mm Solid State Relays (MOS Output) ROHSVishay IntertechnologySolid State Relays (MOS Output)
README
README.mdInstall and run firmware
Add paths to your bash/zsh rc for convenience
export POWERBOX_HOME=$HOME/powerbox
export LVGL_HOME=$HOME/lvgl_micropythonmkdir $POWERBOX_HOME
cd $POWERBOX_HOME
git clone https://github.com/stanislavstarcha/powerbox .Install LVGL micropython
mkdir $LVGL_HOME
cd $LVGL_HOME
git clone https://github.com/lvgl-micropython/lvgl_micropython .Copy fonts
cd $POWEBOX_HOME
cp ./resources/fonts/Roboto-Black.ttf $LVGL_HOME/lib/lvgl/scripts/built_in_font
cp ./resources/fonts/Roboto-Regular.ttf $LVGL_HOME/lib/lvgl/scripts/built_in_font
cp ./resources/fonts/Material-Sharp-28.ttf $LVGL_HOME/lib/lvgl/scripts/built_in_fontBuild fonts
Modify $LVGL_HOME/lib/lvgl/scripts/built_in_font/generate_all.py and add
print("\nGenerating 12 px Roboto Ukrainian")
os.system("lv_font_conv --no-compress --no-prefilter --bpp 2 --size 12 --font Roboto-Regular.ttf --format lvgl -o lv_font_roboto_12.c -r 0xB0,0x20-0x22,0x25,0x27-0x40,0x5B-0x5F,0x7B-0x7D,0xA0,0xA7,0xA9,0xAB,0xBB,0x2BC,0x404,0x406-0x407,0x410-0x429,0x42C,0x42E-0x449,0x44C,0x44E-0x44F,0x454,0x456-0x457,0x490-0x491,0x2011,0x2013,0x2019,0x201C,0x201E,0x2030,0x20AC,0x2116")
print("\nGenerating 24 px Glyphs")
os.system("lv_font_conv --no-compress --no-prefilter --bpp 2 --size 24 --font Material-Sharp-28.ttf --format lvgl -o lv_font_material_24.c -r 0xEAC3,0xEAC9,0xEAD0,0xEACF,0xE000,0xe1a7,0xe1a8,0xf156,0xE7EE,0xe5d3,0xe322,0xe87d")
print("\nGenerating 24 px Roboto")
os.system("lv_font_conv --no-compress --no-prefilter --bpp 2 --size 26 --font Roboto-Black.ttf --format lvgl -o lv_font_roboto_24.c -r 0x20,0x30-0x39,0x412,0x442")
print("\nGenerating 120 px Roboto")
os.system("lv_font_conv --no-compress --no-prefilter --bpp 2 --size 120 --font Roboto-Black.ttf --format lvgl -o lv_font_roboto_120.c --symbols 0123456789%")and then build the fonts
cd $LVGL_HOME/lib/lvgl/scripts/built_in_font
python generate_all.pyModify headers
Open $LVGL_HOME/lib/lvconf.h
Set to 0 (disable) all #define LV_FONT_MONTSERRAT_*
and define custom fonts built earlier.
#define LV_FONT_MONTSERRAT_14 0
...
#define LV_FONT_CUSTOM_DECLARE LV_FONT_DECLARE(lv_font_roboto_12) LV_FONT_DECLARE(lv_font_roboto_24) LV_FONT_DECLARE(lv_font_roboto_120) LV_FONT_DECLARE(lv_font_material_24)
#define LV_FONT_DEFAULT &lv_font_roboto_12Build firmware
cd $LVGL_HOME
python make.py esp32 BOARD=ESP32_GENERIC_S3 DISPLAY=ILI9488 \
FROZEN_MANIFEST=$POWERBOX_HOME/manifest.py BOARD_VARIANT=SPIRAM_OCT \
--flash-size=16 \
--otaFlash firmware
Connect ESP32-S3 to USB and find the port ls /dev/tty*
A typical serial port should look like this
/dev/tty.usbmodem11101/dev/cu.usbserial-0001/dev/tty.usbmodem1234561
Note: On MacOS you may need a CH34xVCPDriver that would create a new port like
/dev/tty.wchusbserial59710258441
cd $LVGL_HOME
python -m esptool --chip esp32s3 -p /dev/tty.wchusbserial59710258441 \
-b 460800 --before default_reset --after hard_reset write_flash \
--flash_mode dio --flash_size 16MB --flash_freq 80m --erase-all \
0x0 /Users/stasstarcha/workspace/lvgl_micropython/build/lvgl_micropy_ESP32_GENERIC_S3-SPIRAM_OCT-16.binBuild release
Specify the version and run the command to produce bin and json files that should be attached to a release on GitHub.
cd $POWEBOX_HOME
python scripts/release.py --version=0.10.0 \
--path=$LVGL_HOME/lib/micropython/ports/esp32/build-ESP32_GENERIC_S3-SPIRAM_OCT/micropython.bin \
--output=../buildDevelopment mode
During development, it's easier to update files one by one.
python initialize.py \
--baud_rate 115200 \
--port /dev/cu.usbserial-0001Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1k | Resistor_SMD:R_1206_3216Metric | R3, R4, R5, R6, R9, R14, R15 |
| 5 | 200R | Resistor_SMD:R_1206_3216Metric | R7, R8, R17, R18, R21 |
| 4 | 10k | Resistor_SMD:R_1206_3216Metric | R10, R11, R12, R22 |
| 3 | 100nF | Capacitor_SMD:C_1206_3216Metric | C1, C3, C4 |
| 2 | ADuM1200BR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U5 |
| 2 | IRLML0030 | Package_TO_SOT_SMD:SOT-23 | Q1, Q4 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric | R16 |
| 1 | 15k | Resistor_SMD:R_1206_3216Metric | R13 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R23 |
| 1 | 1N4007 | Diode_SMD:D_SMA | D1 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 200pF | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 3.9k | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 390R | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 50R | Resistor_SMD:R_1206_3216Metric | R20 |
| 1 | 75k | Resistor_SMD:R_1206_3216Metric | R19 |
| 1 | CD4051B | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | ESP | Connector_JST:JST_PH_B7B-PH-K_1x07_P2.00mm_Vertical | J3 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U3 |
| 1 | LED | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | PMOS 9301 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | PSU | Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J2 |
| 1 | VOM1271T | trypillia:VOM1271T | Q3 |
More from stanislavstarcha/powerbox
3Similar boards
- 4 layers42.5 × 33.3 mm

SR CRT
SRB2149/SR-CRT
A HDMI-to-GT65 Adapter. Uses a USB Capture Card, Raspberry Pi, Tang Nano 9K and a custom interface PCB to bring your Amstrad GT65 40 years into the future.
20 parts3MIT - 2 layers

- 2 layers107.5 × 60 mm

- 2 layers100 × 100 mm

- 4 layers70 × 109.2 mm

Manafish
Tropaion/Manafish_Mainboard
The Manafish Mainboard is the main electronics board of the Manafish ROV. It replaces the Raspberry Pi 3B, the USB-connected Raspberry Pi Pico and the wiring between them with one board:
127 partsAGPL-3.0 - 4 layers100 × 100 mm

ModuCard mms extension pdw board
X-Lemon-X/ModuCard-mms-extension-pdw-board
This repository provides a template design for creating modules in the ModuCard system. Each module is designed to seamlessly interface with the ModuCard backplane, enabling a modular and expandable robotics platform.
161 parts - 2 layers70 × 32 mm

Daughterboard
Minu-IU3IRR/JBclone-soldering-station
Multi channel DIY soldering station with JBC tip support
33 parts13 - 2 layers68.6 × 54.6 mm

Questions
How big is the Booster PCB?
It measures 44 × 64 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Booster use?
41 parts, built around the ADUM1200BR, CD4051BE, IRLML0030 and VOM1271T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Booster KiCad files?
From the stanislavstarcha/powerbox repository on GitHub, at the commit this page was made from: the board is resources/pcba/booster/booster.kicad_pcb and its schematic resources/pcba/booster/booster.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Booster design in my own project?
Its repository states no licence, so its author keeps all rights: ask stanislavstarcha before reusing the design.

