2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0
2 layers
FutboleroEsp32
Sstrv/Dise-oPCBDiseños de pcb para uso vario usando típicamente Kicad
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 36
- Pads
- 81
- Tracks, vias
- 113, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Aug 2026
- Updated
- 9 Aug 2026
Overview
FutboleroEsp32 is an open-source printed circuit board by Sstrv, from the Sstrv/Dise-oPCB repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 24 parts on 36 nets, routed with 113 tracks and 0 vias.
It is built around the IR204-A-L. Its parts include 4 capacitors, 1 resistor, 1 diode, 1 connector and 1 switch. It belongs with the ESP32 boards of this library.
Main components
1Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01 | Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork | Jin-1, Jin+1, Jout-1, Jout+1 |
| 4 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | JA1, JA2, JB1, JB2 |
| 2 | C | Capacitor_THT:C_Radial_D4.0mm_H7.0mm_P1.50mm | C3, C4 |
| 2 | Conn_01x08 | Connector_JST:JST_XH_B8B-XH-AM_1x08_P2.50mm_Vertical | JDig1, JPO1 |
| 2 | Conn_01x15 | Connector_JST:JST_EH_B15B-EH-A_1x15_P2.50mm_Vertical | JDig2, JNC1 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C2 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | Conn_01x02 | Connector_Hirose:Hirose_DF13-02P-1.25DS_1x02_P1.25mm_Horizontal | J13 |
| 1 | IR204A | LED_THT:LED_D3.0mm_IRBlack | D1 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
The 20 most common of 24 parts.
Questions
What parts does the FutboleroEsp32 use?
24 parts, built around the IR204-A-L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FutboleroEsp32 KiCad files?
From the Sstrv/Dise-oPCB repository on GitHub, at the commit this page was made from: the board is FutboleroEsp32/FutboleroEsp32.kicad_pcb and its schematic FutboleroBidi/FutboleroBidi/FutboleroBidi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FutboleroEsp32 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers104.2 × 77.7 mm
- 2 layers38.3 × 25.2 mm
- 2 layers75 × 40 mm
Remote
bismarx-v1/Sumec-Remote
IR remote for MiniSumo, schematic and partial code was forked from p1rse
47 parts1 - 2 layers30.5 × 22.9 mm
Ir project
hitendravalhe/IR_sensor_pcb_design
This repository contains the design files and documentation for an Infrared (IR) sensor PCB with an integrated LM35 temperature sensor.
9 parts1 - 2 layers25.4 × 40.1 mm
PTL IR remote
PostTenebrasLab/PTL-IR_remote
IR remote based on esp8266 with OTA, MQTT, web server, DHT22, brightness, IRM
22 parts1GPL-3.0 - 2 layers210 × 126 mm
- 2 layers22.9 × 10.9 mm
