2 layers57.3 × 19 mm
2 layers69 × 91.5 mm
Fadaha
squeedee/0sc1v1Turn the fader board from a Yamaha 01v mixer into a compact OSC controller
- Size
- 69 × 91.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 56
- Pads
- 152
- Tracks, vias
- 251, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Feb 2019
- Updated
- 24 Feb 2019
Overview
Fadaha is an open-source printed circuit board by squeedee, from the squeedee/0sc1v repository on GitHub, published under the MIT licence. It is a 2-layer board of 69 × 91.5 mm with 26 parts on 56 nets, routed with 251 tracks and 2 vias.
Its parts include 10 resistors, 5 ICs, 4 capacitors and 2 connectors. It belongs with the audio and music boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
README
README.md0sc1v
Turn the fader board from a Yamaha 01v mixer into a compact OSC controller
The Yamaha 01v was my favorite digital mixer of the 90s. However I recently upgraded, to the X-Air Xr-18 by Behringer. The XR-18 is so cheap, does so much, and I chose it based on certain criteria:
- 24bit for headroom, the 16bit 01v made me work too hard up front
- Lots of digital in/outs to my PC. I would have been happy with 8/8, but the XR-18 comes with 18/18
- Physical controls
And it's the last point that makes the XR-18 sad for me, I like having physical faders. So this project is all about using the motorized faders of my ailing 01v as a Fader Controller for the XR-18 (and everything else)
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 11k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5 |
| 5 | 20k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7, R8, R9, R10 |
| 4 | 100nf | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C4 |
| 4 | 74125 | Package_DIP:DIP-14_W7.62mm_Socket | U2, U3, U4, U5 |
| 1 | 11 pin header | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | CN002 |
| 1 | 14 pin header | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | CN003 |
| 1 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | GND |
| 1 | Screw_Terminal_01x02 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | PWR1 |
| 1 | Teensy3.2 | teensy:Teensy30_31_32_LC-custom | U1 |
The 23 most common of 26 parts.
Questions
How big is the Fadaha PCB?
It measures 69 × 91.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fadaha use?
26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fadaha KiCad files?
From the squeedee/0sc1v repository on GitHub, at the commit this page was made from: the board is Fadaha/Fadaha.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fadaha design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers98 × 59.5 mm
MCP23017 PCB
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
26 parts915 - 2 layers142.9 × 98.5 mm
- 2 layers86.1 × 86.1 mm
- 2 layers103.8 × 50 mm
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers20.3 × 34.8 mm
L0 ESP32
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
26 parts546MIT - 2 layers40.6 × 50.8 mm
WALTsm
google/walt
A device for measuring latency of physical sensors and outputs on phones and computers
26 parts474Apache-2.0 - 2 layers158.5 × 75 mm
